Unifying the ORR and OER with surface oxygen and extracting their intrinsic activities on platinum
Ontology highlight
ABSTRACT:
SUBMITTER: Brandes B
PROVIDER: S-EPMC11347700 | biostudies-literature | 2024 Jan
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:We present experimentally observed molecular adsorbate coverages (e.g., O(H), OOH and HOOH) on real operating dealloyed bimetallic PtMx (M = Ni or Co) catalysts under oxygen reduction reaction (ORR) conditions obtained using X-ray absorption near edge spectroscopy (XANES). The results reveal a complex Sabatier catalysis behavior and indicate the active ORR mechanism changes with Pt-O bond weakening from the O2 dissociative mechanism, to the peroxyl mechanism, and finally to the hydrogen peroxide mechanism. An important rearrangement of the OOH binding site, an intermediate in the ORR, enables facile H addition to OOH and faster O-O bond breaking on 111 faces at optimal Pt-O bonding strength, such as that occurring in dealloyed PtM core-shell nanoparticles. This rearrangement is identified by previous DFT calculations and confirmed from in situ measured OOH adsorption coverages during the ORR. The importance of surface structural effects and 111 ordered faces is confirmed by the higher specific ORR rates on solid core vs porous multi-core nanoparticles.
| S-EPMC4501392 | biostudies-literature
Project description:Designing efficient ORR/OER bifunctional electrocatalysts is very significant for reducing energy consumption and environmental protection. Hence, we studied the ORR/OER bifunctional catalytic activity of iron polyphthalocyanine (FePPc) coordinated by a series of axial ligands which has different electronegative coordination atom (FePPc-L) (L = -CN, -SH, -SCH3, -SC2H5, -I, -Br, -NH2, -Cl, -OCH3, -OH, and -F) in alkaline medium by DFT calculations. Among all FePPc-L, FePPc-CN, FePPc-SH, FePPc-SCH3, and FePPc-SC2H5 exhibit excellent ORR/OER bifunctional catalytic activities. Their ORR/OER overpotential is 0.256 V/0.234 V, 0.278 V/0.256 V, 0.280 V/0.329 V, and 0.290 V/0.316 V, respectively, which are much lower than that of the FePPc (0.483 V/0.834 V). The analysis of the electronic structure of the above catalysts shows that the electronegativity of the coordination atoms in the axial ligand is small, resulting in less distribution of dz2, dyz, and dxz orbitals near Ef, weak orbital polarization, small charge and magnetic moment of the central Fe atom, and weak adsorption strength for *OH. All these prove that the introduction of axial ligands with appropriate electronegativity coordinating atoms can adjust the adsorption of catalyst to intermediates and modify the ORR/OER bifunctional catalytic activities. This is an effective strategy for designing efficient ORR/OER bifunctional electrocatalysts.
| S-EPMC10780174 | biostudies-literature
Project description:The new 3D coordination polymer (CP) [Mn(L)(HCOO)]n (Mn-CP) [L = 4-(pyridin-4-ylcarbamoyl)benzoate] was synthesised via a hydrothermal reaction using the pyridyl amide functionalized benzoic acid HL. It was characterized by elemental, FT-IR spectroscopy, single-crystal and powder X-ray diffraction (PXRD) analyses. Its structural features were disclosed by single-crystal X-ray diffraction analysis, which revealed a 3D structure with the monoclinic space group P21/c. Its performance as an electrocatalyst for oxygen reduction (ORR), oxygen evolution (OER), and hydrogen evolution (HER) reactions was tested in both acidic (0.5 M H2SO4) and alkaline (0.1 M KOH) media. A distinct reduction peak was observed at 0.53 V vs. RHE in 0.1 M KOH, which corresponds to the oxygen reduction, thus clearly demonstrating the material's activity for the ORR. Tafel analysis revealed a Tafel slope of 101 mV dec-1 with mixed kinetics of 2e- and 4e- pathways indicated by the Koutecky-Levich analysis. Conversely, the ORR peak was not present in 0.5 M H2SO4 indicating no activity of Mn-CP for this reaction in acidic media. In addition, Mn-CP demonstrated a noteworthy activity toward OER and HER in acidic media, in contrast to what was observed in 0.1 M KOH.
| S-EPMC9655238 | biostudies-literature
Project description:Tuning the surface structure at the atomic level is of primary importance to simultaneously meet the electrocatalytic performance and stability criteria required for the development of low-temperature proton-exchange membrane fuel cells (PEMFCs). However, transposing the knowledge acquired on extended, model surfaces to practical nanomaterials remains highly challenging. Here, we propose 'surface distortion' as a novel structural descriptor, which is able to reconciliate and unify seemingly opposing notions and contradictory experimental observations in regards to the electrocatalytic oxygen reduction reaction (ORR) reactivity. Beyond its unifying character, we show that surface distortion is pivotal to rationalize the electrocatalytic properties of state-of-the-art of PtNi/C nanocatalysts with distinct atomic composition, size, shape and degree of surface defectiveness under a simulated PEMFC cathode environment. Our study brings fundamental and practical insights into the role of surface defects in electrocatalysis and highlights strategies to design more durable ORR nanocatalysts.
| S-EPMC6109589 | biostudies-literature
Project description:Understanding the mechanism of water oxidation to dioxygen represents the bottleneck towards the design of efficient energy storage schemes based on water splitting. The investigation of kinetic isotope effects has long been established for mechanistic studies of various such reactions. However, so far natural isotope abundance determination of O2 produced at solid electrode surfaces has not been applied. Here, we demonstrate that such measurements are possible. Moreover, they are experimentally simple and sufficiently accurate to observe significant effects. Our measured kinetic isotope effects depend strongly on the electrode material and on the applied electrode potential. They suggest that in the case of iron oxide as the electrode material, the oxygen evolution reaction occurs via a rate-determining O-O bond formation via nucleophilic water attack on a ferryl unit.
| S-EPMC6212532 | biostudies-literature
Project description:LaMn1-xCoxO3 perovskites were synthesized by a modified sol-gel method which incorporates EDTA. These materials' electrochemical activity towards both oxygen reduction (ORR) and oxygen evolution reactions (OER) was studied. The cobalt substitution level determines some physicochemical properties and, particularly, the surface concentration of Co and Mn's different oxidation states. As a result, the electroactivity of perovskite materials can be tuned using their composition. The presence of cobalt at low concentration influences the catalytic activity positively, and better bifunctionality is attained. As in other perovskites, their low electrical conductivity limits their applicability in electrochemical devices. It was found that the electrochemical performance improved significantly by physically mixing with a mortar the active materials with two different carbon black materials. The existence of a synergistic effect between the electroactive component and the carbon material was interpreted in light of the strong carbon-oxygen-metal interaction. Some mixed samples are promising electrocatalysts towards both ORR and OER.
| S-EPMC7759965 | biostudies-literature
Project description:Transition metal oxide nanomaterials or nanocomposites containing transition metal oxides have the potential to replace traditional catalysts for electrochemical applications, photocatalysis, and energy storage. Amorphous manganese oxide catalysts were prepared via photochemical metal-organic deposition (PMOD). Through XRD, SEM-EDS, Raman spectroscopy, FTIR spectroscopy, HRTEM-EDS, and XPS, we confirmed that amorphous manganese oxide catalysts were successfully prepared. Amorphous catalysts prepared with different photolysis times were compared in terms of their performance for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER), and catalyst MnO x -PMOD48 showed the best performance because of its high Mn3+ proportion and electrochemically active surface area. MnO x -PMOD48 showed better ORR/OER performance than the crystalline MnO x and MnO x /Ti4O7 catalysts from our previous work. Following our previous work on crystalline manganese oxide catalysts, we added Ti4O7 during the PMOD process with 48 h of treatment and obtained the amorphous catalyst MnO x /Ti4O7-PMOD. MnO x /Ti4O7-PMOD was supported by Ti4O7 particles, which led to improved stability. The ORR/OER catalytic activity of MnO x /Ti4O7-PMOD was better than that of crystalline catalyst MnO x /Ti4O7-300, which was the best crystalline catalyst in our previous work. We also compared lithium-oxygen batteries assembled with MnO x /Ti4O7-PMOD and MnO x /Ti4O7-300. The battery performance tests confirmed that the amorphous manganese catalyst had better ORR/OER bifunctional catalytic performance than the crystalline manganese catalyst because of its high defect state with more abundant edge active sites and more surface-exposed catalytic active sites.
| S-EPMC8979087 | biostudies-literature
Project description:The development of low-cost and high-performance electrocatalysts for simultaneously boosting the hydrogen evolution reaction (HER), oxygen evolution reaction (OER), and oxygen reduction reaction (ORR) is highly crucial but still challenging. Herein, a facile one-step solid-phase polymerization and confined pyrolysis strategy is developed for scalable synthesis of a Fe x P/Fe3C-based (x = 1, 2) heterojunction with controllable iron phosphide crystal phases. By effective heterojunction interface regulation, the strong synergic effect between FeP/Fe3C and N- and P-codoped carbon (NPC) modified the electronic structure, resulting in an excellent electrocatalytic performance for the HER, OER, and ORR synchronously. Typically, the FeP/Fe3C@NPC catalyst exhibits efficient HER activity with a low overpotential of 10 mA cm-2 for the HER (97 mV) and OER (440 mV) and a high half-wave potential of 0.87 V for the ORR, as well as excellent stability in alkaline media. Theoretical calculations demonstrated that Fe3C can promote the activation of water molecules, while FeP is beneficial to the removal of H2 and the FeP/Fe3C heterojunction can facilitate both Volmer and Heyrovsky steps in the HER process simultaneously. Moreover, FeP has a stronger inhibitory effect on OH adsorption, revealing that the FeP/Fe3C heterojunction also shows a better promoting effect for both the OER and ORR, respectively.
| S-EPMC9088919 | biostudies-literature
Project description:Oxygen reduction reactions (ORRs) involve a multistep proton-coupled electron process accompanied by the conversion of the apodictic spin configuration. Understanding the role of spin configurations of metals in the adsorption and desorption of oxygen intermediates during ORRs is critical for the design of efficient ORR catalysts. Herein, a platinum-rare-earth-metal-based alloy catalyst, Pt2Gd, is introduced to reveal the role of spin configurations in the catalytic activity of materials. The catalyst exhibits a unique intrinsic spin reconfiguration because of interactions between the Gd-4f and Pt-5d orbitals. The adsorption and desorption of the oxygen species are optimized by modifying the spin symmetry and electronic structures of the material for increased ORR efficiency. The Pt2Gd alloy exhibits a half-wave potential of 0.95 V and a superior mass activity of 1.5 A·mgPt-1 in a 0.1 M HClO4 electrolyte, as well as higher durability than conventional Pt/C catalysts. Theoretical calculations have proven that the spin shielding effect of Gd pairs increases the spin symmetry of Pt-5d orbitals and adsorption preferences toward spin-polarized intermediates to facilitate ORR. This work clarifies the impact of modulating the intrinsic spin state of Pt through the interaction with the local high spin 4f orbital electrons in rare-earth metals, with the aim of boosting the spin-related oxygen reduction reaction, thus fundamentally contributing to the understanding of new descriptors that control ORR activity.
| S-EPMC10600901 | biostudies-literature
Project description:In the present work, a highly efficient and excellent electrocatalyst material for bifunctional oxygen reduction/evolution reaction (ORR/OER) was synthesized using the microwave-assisted hydrothermal method. In brief, ultrafine hexagonal cerium oxide (CeO2) nanoparticles were tailored on the layered surface of in situ nitrogen-doped graphene oxide (NGO) sheets. The nanocomposites exhibited a high anodic onset potential of 0.925 V vs. RHE for ORR activity and 1.2 V for OER activity with a very high current density in 0.5 M KOH. The influence of oxygen cluster on Ce3+/Ce4+ ion decoration on outward/inward in situ nitrogen-coupled GO enhanced the physicochemical properties of composites and in turn increased electron transferability. The microwave-assisted hydrothermal coupling technique provides a higher density, active sites on CeO2@NGO composites, and oxygen deficiency structures in ultrafine Ce-O particles and boosts higher charge transferability in the composites. It is believed that the physical states of Ce-N- C, Ce-C=O, and a higher amount of oxygen participation with ceria increase the density of composites that in turn increases the efficiency. N-doped graphene oxide promotes high current conduction and rapid electron transferability while reducing the external transport resistance in oxygen electrocatalysis by sufficient mass transfer through in-built channels. This study may provide insights into the knowledge of Ce-enabled bifunctional activity to guide the design of a robust catalyst for electrochemical performance.
| S-EPMC9263449 | biostudies-literature