Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

An Aerosol-Assisted Chemical Vapor Deposition Route to Tin-Doped Gallium Oxide Thin Films with Optoelectronic Properties.

ABSTRACT: Gallium oxide is a wide-bandgap compound semiconductor material renowned for its diverse applications spanning gas sensors, liquid crystal displays, transparent electrodes, and ultraviolet detectors. This paper details the aerosol assisted chemical vapor deposition synthesis of tin doped gallium oxide thin films using gallium acetylacetonate and monobutyltin trichloride dissolved in methanol. It was observed that Sn doping resulted in a reduction in the transmittance of Ga₂O₃ films within the visible spectrum, while preserving the wide bandgap characteristics of 4.8 eV. Furthermore, Hall effect testing revealed a substantial decrease in the resistivity of Sn-doped Ga₂O₃ films, reducing it from 4.2 × 10⁶ Ω cm to 2 × 10⁵ Ω cm for the 2.5 at. % Sn:Ga₂O₃ compared to the nominally undoped Ga₂O₃.

SUBMITTER: Chen R

PROVIDER: S-EPMC11360363 | biostudies-literature | 2024 Aug

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

An Aerosol-Assisted Chemical Vapor Deposition Route to Tin-Doped Gallium Oxide Thin Films with Optoelectronic Properties.

Chen Ruizhe R Sathasivam Sanjayan S Borowiec Joanna J Carmalt Claire J CJ

ACS applied electronic materials 20240812 8

Gallium oxide is a wide-bandgap compound semiconductor material renowned for its diverse applications spanning gas sensors, liquid crystal displays, transparent electrodes, and ultraviolet detectors. This paper details the aerosol assisted chemical vapor deposition synthesis of tin doped gallium oxide thin films using gallium acetylacetonate and monobutyltin trichloride dissolved in methanol. It was observed that Sn doping resulted in a reduction in the transmittance of Ga2O3</su ...[more]

PMID: 39221136

Similar Datasets

Highly conductive and transparent gallium doped zinc oxide thin films via chemical vapor deposition.

Project description:Degenerately doped ZnO is seen as a potential substitute to the ubiquitous and expensive Sn doped In2O3 as a transparent electrode in optoelectronic devices. Here, highly conductive and transparent Ga doped ZnO thin films were grown via aerosol assisted chemical vapor deposition. The lowest resistivity (7.8 × 10-4 Ω.cm) and highest carrier concentration (4.23 × 1020 cm-3) ever reported for AACVD grown ZnO: Ga was achieved due to using oxygen poor growth conditions enabled by diethylzinc and triethylgallium precursors.

| S-EPMC6971236 | biostudies-literature

Transparent and conducting boron doped ZnO thin films grown by aerosol assisted chemical vapor deposition.

Project description:ZnO based transparent conducting oxides are important as they provide an alternative to the more expensive Sn : In2O3 that currently dominates the industry. Here, we investigate B-doped ZnO thin films grown via aerosol assisted chemical vapour deposition. B : ZnO films were produced from zinc acetate and triethylborane using either tetrahydrofuran or methanol (MeOH) as the solvent. The lowest resistivity of 5.1 × 10-3 Ω cm along with a visible light transmittance of ∼75-80% was achieved when using MeOH as the solvent. XRD analysis only detected the wurtzite phase of ZnO suggesting successful solid solution formation with B3+ substituting Zn2+ sites in the lattice. Refinement of the XRD patterns showed minimal distortion to the ZnO unit cell upon doping when MeOH was the solvent due to the immiscibility of the [BEt3] solution (1.0 M solution in hexane) in methanol that limited the amount of B going into the films, thus preventing excessive doping.

| S-EPMC9671099 | biostudies-literature

n-Type conducting P doped ZnO thin films via chemical vapor deposition.

Project description:Extrinsically doped ZnO thin films are of interest due to their high electrical conductivity and transparency to visible light. In this study, P doped ZnO thin films were grown on glass substrates via aerosol assisted chemical vapour deposition. The results show that P is a successful dopant for ZnO in the V+ oxidation state and is able to reduce resistivity to 6.0 × 10-3 Ω cm while maintaining visible light transmittance at ∼75%. The thins films were characterized by X-ray diffraction studies that showed only Bragg peaks for the wurtzite ZnO phase. Fitting of the diffraction data to a Le Bail model also showed a general expansion of the ZnO unit cell upon doping due to the substitution of Zn2+ ions with the larger P5+.

| S-EPMC9056824 | biostudies-literature

Oxidative chemical vapor deposition of polyaniline thin films.

Project description:Polyaniline (PANI) is synthesized via oxidative chemical vapor deposition (oCVD) using aniline as monomer and antimony pentachloride as oxidant. Microscopy and spectroscopy indicate that oCVD processing conditions influence the PANI film chemistry, oxidation, and doping level. Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS) indicate that a substrate temperature of 90 °C is needed to minimize the formation of oligomers during polymerization. Lower substrate temperatures, such as 25 °C, lead to a film that mostly includes oligomers. Increasing the oxidant flowrate to nearly match the monomer flowrate favors the deposition of PANI in the emeraldine state, and varying the oxidant flowrate can directly influence the oxidation state of PANI. Changing the reactor pressure from 700 to 35 mTorr does not have a significant effect on the deposited film chemistry, indicating that the oCVD PANI process is not concentration dependent. This work shows that oCVD can be used for depositing PANI and for effectively controlling the chemical state of PANI.

| S-EPMC5480348 | biostudies-literature

Synthesis and Characterization of Optically Transparent and Electrically Conductive Mo-Doped ZnO, F-Doped ZnO, and Mo/F-Codoped ZnO Thin Films via Aerosol-Assisted Chemical Vapor Deposition.

Project description:Mo-doped ZnO (MZO), F-doped ZnO (FZO), and Mo/F-codoped ZnO (MFZO) films have been deposited using a simple, cheap, and effective thin-film preparation route, aerosol-assisted chemical vapor deposition (AACVD). ZnO was successfully doped with Mo and/or F, confirmed by X-ray photoelectron spectroscopy (XPS) and by a decrease in unit cell parameters from X-ray diffraction (XRD). XRD also confirmed that all of the films had hexagonal wurtzite ZnO structures. Scanning electron microscopy showed that all of the films had well-defined surface features. The undoped ZnO film had a high resistivity of ∼102 Ω·cm, determined by Hall effect measurements, and a visible light transmittance of 72%, determined by ultraviolet-visible (UV-vis)-IR spectroscopy. The transmittance of the doped and codoped films was improved to 75-85%. The ZnO film codoped with 6.2 atom% Mo and 3.6 atom% F, deposited at 550 °C achieved the minimum resistance (5.084 × 10-3 Ω·cm) with a significant improvement in carrier concentration (5.483 × 1019 cm-3) and mobility (21.78 cm2 V-1 s-1).

| S-EPMC11660145 | biostudies-literature

High-Speed Vapor Transport Deposition of Perovskite Thin Films.

Project description:Intensive research of hybrid metal-halide perovskite materials for use as photoactive materials has resulted in an unmatched increase in the power conversion efficiency of perovskite photovoltaics (PVs) over the last couple of years. Now that lab-fabricated perovskite devices rival the efficiency of silicon PVs, the next challenge of scalable mass manufacturing of large perovskite PV panels remains to be solved. For that purpose, it is still unclear which manufacturing method will provide the lowest processing cost and highest quality solar cells. Vapor deposition has been proven to work well for perovskites as a controllable and repeatable thin-film deposition technique but with processing speeds currently too slow to adequately lower the production costs. Addressing this challenge, in the present work, we demonstrate a high-speed vapor transport processing technique in a custom-built reactor that produces high-quality perovskite films with unprecedented deposition speed exceeding 1 nm/s, over 10× faster than previous vapor deposition demonstrations. We show that the semiconducting perovskite films produced with this method have excellent crystallinity and optoelectronic properties with 10 ns charge carrier lifetime, enabling us to fabricate the first photovoltaic devices made by perovskite vapor transport deposition. Our experiments are guided by computational fluid dynamics simulations that also predict that this technique could lead to deposition rates on the order of micrometers per second. This, in turn, could enable cost-effective scalable manufacturing of the perovskite-based solar technologies.

| S-EPMC6748557 | biostudies-literature

Flexible, Transparent, and Cytocompatible Nanostructured Indium Tin Oxide Thin Films for Bio-optoelectronic Applications.

Project description:Electrical stimulation has been used successfully for several decades for the treatment of neurodegenerative disorders, including motor disorders, pain, and psychiatric disorders. These technologies typically rely on the modulation of neural activity through the focused delivery of electrical pulses. Recent research, however, has shown that electrically triggered neuromodulation can be further enhanced when coupled with optical stimulation, an approach that can benefit from the development of novel electrode materials that combine transparency with excellent electrochemical and biological performance. In this study, we describe an electrochemically modified, nanostructured indium tin oxide/poly(ethylene terephthalate) (ITO/PET) surface as a flexible, transparent, and cytocompatible electrode material. Electrochemical oxidation and reduction of ITO/PET electrodes in the presence of an ionic liquid based on d-glucopyranoside and bistriflamide units were performed, and the electrochemical behavior, conductivity, capacitance, charge transport processes, surface morphology, optical properties, and cytocompatibility were assessed in vitro. It has been shown that under selected conditions, electrochemically modified ITO/PET films remained transparent and highly conductive and were able to enhance neural cell survival and neurite outgrowth. Consequently, electrochemical modification of ITO/PET electrodes in the presence of an ionic liquid is introduced as an effective approach for tailoring the properties of ITO for advanced bio-optoelectronic applications.

| S-EPMC10561142 | biostudies-literature

A comprehensive calibration of integrated magnetron sputtering and plasma enhanced chemical vapor deposition for rare-earth doped thin films.

Project description:A new integrated deposition system taking advantage of magnetron sputtering and electron cyclotron-plasma enhanced chemical vapour deposition (IMS ECR-PECVD) is presented that mitigates the drawbacks of each fabrication system. This tailor-made system provides users with highly homogeneous and pure thin films with less undesired hydrogen and well-controlled rare-earth concentration compared to existing methods of rare-earth doping, such as metalorganic powders, sputtering, and ion implantation. We established the first comprehensive report on the deposition parameters of argon flow and sputtering power to achieve desired rare-earth concentrations in a wide composition range of terbium (Tb) doped-silicon oxide (Tb:SiOx) matrices including silicon-rich (x < 2), oxygen-rich (x > 2), and stoichiometric silicon oxide (x = 2). The deposition parameters to fabricate crystalline structure (Tb2Si2O7) in oxygen-rich samples are reported where Tb ions are optically active. IMS ECR-PECVD pushes the solubility limit of the rare-earth dopant in silicon films to 17 at.% for the desired future nanophotonic devices.Graphical abstractSupplementary informationThe online version contains supplementary material available at 10.1557/s43578-023-01207-2.

| S-EPMC10784389 | biostudies-literature

Investigation of the Optoelectronic Properties of Ti-doped Indium Tin Oxide Thin Film.

Project description:: In this study, direct-current magnetron sputtering was used to fabricate Ti-doped indium tin oxide (ITO) thin films. The sputtering power during the 350-nm-thick thin-film production process was fixed at 100 W with substrate temperatures increasing from room temperature to 500 °C. The Ti-doped ITO thin films exhibited superior thin-film resistivity (1.5 × 10-⁴ Ω/cm), carrier concentration (4.1 × 1021 cm-³), carrier mobility (10 cm²/Vs), and mean visible-light transmittance (90%) at wavelengths of 400-800 nm at a deposition temperature of 400 °C. The superior carrier concentration of the Ti-doped ITO alloys (>1021 cm-³) with a high figure of merit (81.1 × 10-³ Ω-¹) demonstrate the pronounced contribution of Ti doping, indicating their high suitability for application in optoelectronic devices.

| S-EPMC5512923 | biostudies-other

Study of Gallium-Doped Zinc Oxide Thin Films Processed by Atomic Layer Deposition and RF Magnetron Sputtering for Transparent Antenna Applications.

Project description:Gallium-doped zinc oxide (GZO) films were fabricated using RF magnetron sputtering and atomic layer deposition (ALD). The latter ones demonstrate higher electrical conductivities (up to 2700 S cm-1) and enhanced charge mobilities (18 cm2 V-1 s-1). The morphological analysis reveals differences mostly due to the very different nature of the deposition processes. The film deposited via ALD shows an increased transmittance in the visible range and a very small one in the infrared range that leads to a figure of merit of 0.009 Ω-1 (10 times higher than for the films deposited via sputtering). A benchmarking is made with an RF sputtered indium-doped tin oxide (ITO) film used conventionally in the industry. Another comparison between ZnO, Al:ZnO (AZO), and Ga:ZnO (GZO) films fabricated by ALD is presented, and the evolution of physical properties with doping is evidenced. Finally, we processed GZO thin films on a glass substrate into patterned transparent patch antennas to demonstrate an application case of short-range communication by means of the Bluetooth Low Energy (BLE) protocol. The GZO transparent antennas' performances are compared to a reference ITO antenna on a glass substrate and a conventional copper antenna on FR4 PCB. The results highlight the possibility to use the transparent GZO antenna for reliable short-range communication and the achievability of an antenna entirely processed by ALD.

| S-EPMC9933467 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data