Designing an Additively Manufactured Ti-Al-Fe Alloy with a Wide Process Window.

ABSTRACT: To develop a cost-effective titanium alloy tailored for laser powder bed fusion (LPBF), a novel Ti-5.2Al-5Fe (wt.%) dual-phase alloy was designed and fabricated in this study. The composition was optimized for low density (4.4 g/cm³), high yield strength (1052 MPa), and suitable β-phase stability ([Mo]_eq = 9.3%). The alloy demonstrated excellent formability, achieving high densification (porosity ≤ 2%) and hardness (>400 HV) over a wide volumetric energy density range (48-204 J/mm³). The Al element inhibited balling by improving melt pool wettability, while the Fe element synergistically promoted densification by lowering the liquidus temperature. The as-built microstructure comprised α and β phases, with the α-phase content increasing significantly from 25

SUBMITTER: Cai L 

PROVIDER: S-EPMC12608022 | biostudies-literature | 2025 Oct

REPOSITORIES: biostudies-literature