Potentiometric detection of DNA hybridization.
Ontology highlight
ABSTRACT:
SUBMITTER: Numnuam A
PROVIDER: S-EPMC2267036 | biostudies-literature | 2008 Jan
REPOSITORIES: biostudies-literature
Publications
Potentiometric detection of DNA hybridization.
Numnuam Apon A Chumbimuni-Torres Karin Y KY Xiang Yun Y Bash Ralph R Thavarungkul Panote P Kanatharana Proespichaya P Pretsch Ernö E Wang Joseph J Bakker Eric E
Journal of the American Chemical Society 20071220 2
Similar Datasets
Project description:Label-free potentiometric detection of DNA molecules using a field-effect transistor (FET) with a gold gate offers an electrical sensing platform for rapid, straightforward, and inexpensive analyses of nucleic acid samples. To induce DNA hybridization on the FET sensor surface to enable potentiometric detection, probe DNA that is complementary to the target DNA has to be immobilized on the FET gate surface. A common method for probe DNA functionalization is based on thiol-gold chemistry, immobilizing thiol-modified probe DNA on a gold gate with thiol-gold bonds. A self-assembled monolayer (SAM), based on the same thiol-gold chemistry, is also needed to passivate the rest of the gold gate surface to prevent non-specific adsorption and to enable favorable steric configuration of the probe DNA. Herein, the applicability of such FET-based potentiometric DNA sensing was carefully investigated, using a silicon nanoribbon FET with a gold-sensing gate modified with thiol-gold chemistry. We discover that the potential of the gold-sensing electrode is determined by the mixed potential of the gold-thiol and gold-oxygen redox interactions. This mixed potential gives rise to a redox buffer effect which buffers the change in the surface charge induced by the DNA hybridization, thus suppressing the potentiometric signal. Analogous redox buffer effects may also be present for other types of potentiometric detections of biomarkers based on thiol-gold chemistry.
| S-EPMC8314270 | biostudies-literature
Project description:We describe an approach to substituting a fluorescence microarray with a surface made of an arrangement of electrolyte-gated field effect transistors. This was achieved using a dedicated blocking of non-specific interactions and comparing threshold voltage shifts of transistors exhibiting probe molecules of different base sequence. We apply the approach to detection of the 35delG mutation, which is related to non-syndromic deafness and is one of the most frequent mutations in humans. The process involves barcode sequences that are generated by Tas-PCR, a newly developed replication reaction using polymerase blocking. The barcodes are recognized by hybridization to surface attached probes and are directly detected by the semiconductor device.
| S-EPMC3935197 | biostudies-literature
Project description:BackgroundDNA microarrays contain thousands of different probe sequences represented on their surface. These are designed in such a way that potential cross-hybridization reactions with non-target sequences are minimized. However, given the large number of probes, the occurrence of cross hybridization events cannot be excluded. This problem can dramatically affect the data quality and cause false positive/false negative results.ResultsCrossHybDetector is a software package aimed at the identification of cross-hybridization events occurred during individual array hybridization, by using the probe sequences and the array intensity values. As output, the software provides the user with a list of array spots potentially 'corrupted' and their associated p-values calculated by Monte Carlo simulations. Graphical plots are also generated, which provide a visual and global overview of the quality of the microarray experiment with respect to cross-hybridization issues.ConclusionCrossHybDetector is implemented as a package for the statistical computing environment R and is freely available under the LGPL license within the CRAN project.
| S-EPMC2596149 | biostudies-literature
Project description:Gas exhaust emissions in vehicles are increasingly restrictive in EU and USA. Diesel engines are particularly affected by limitation in hydrocarbons and NOx concentrations. This work presents a screening of working electrode materials to develop a potentiometric sensor, with the most promising material to detect being C₂H₄ at 550 °C. The device consists of a dense 8YSZ (8 mol% Y₂O₃ stabilized ZrO₂) disk as oxide-ion conducting electrolyte, whereas platinum is screen-printed in the back face as reference electrode. As working electrode, several materials such as Fe0.7Cr1.3O₃, ZnCr₂O₄, Fe₂NiO₄, La0.8Sr0.2CrO3-δ (LSC), La0.8Sr0.2MnO₃ (LSM), and NiO+5%wt Au were tested to detect C₂H₄. Sensor voltage was measured for several concentrations of C₂H₄ and CO as these are two of the major oxidizable compounds in a diesel exhaust gas. Fe0.7Cr1.3O₃ was selected as the most promising material because of its response to C₂H₄ and CO. Not only is the response to the individual analytes important, but the C₂H₄ cross-sensitivity toward CO is also important. Fe0.7Cr1.3O₃ showed a good performance to C₂H₄, with low cross-sensitivity to CO. In addition, when 0.16 ppm of phenanthrene is added, the sensor still has a slightly better response to C₂H₄ than to CO. Nevertheless, the sensor exposure to high concentrations (>85 ppm) of polycyclic aromatic hydrocarbons led to signal saturation. On the other hand, the operation in wet conditions induces lower sensor sensitivity to C₂H₄ and higher cross-sensitivity toward CO increase, i.e., the sensor response becomes similar for C₂H₄ and CO.
| S-EPMC6164524 | biostudies-literature
Project description:The knowledge of genomic DNA variations in patient samples has a high and increasing value for human diagnostics in its broadest sense. Although many methods and sensors to detect or quantify these variations are available or under development, the number of underlying physico-chemical detection principles is limited. One of these principles is the hybridization of sample target DNA versus nucleic acid probes. We introduce a novel thermodynamics approach and develop a framework to exploit the specific detection capabilities of nucleic acid hybridization, using generic principles applicable to any platform. As a case study, we detect point mutations in the KRAS oncogene on a microarray platform. For the given platform and hybridization conditions, we demonstrate the multiplex detection capability of hybridization and assess the detection limit using thermodynamic considerations; DNA containing point mutations in a background of wild type sequences can be identified down to at least 1% relative concentration. In order to show the clinical relevance, the detection capabilities are confirmed on challenging formalin-fixed paraffin-embedded clinical tumor samples. This enzyme-free detection framework contains the accuracy and efficiency to screen for hundreds of mutations in a single run with many potential applications in molecular diagnostics and the field of personalised medicine.
| S-EPMC5444680 | biostudies-literature
Project description:Highly efficient gas sensors able to detect and identify hazardous gases are crucial for numerous applications. Array of conventional single-output sensors is currently limited by problems including drift, large size, and high cost. Here, we report a sensor with multiple chemiresistive and potentiometric outputs for discriminative gas detection. Such sensor is applicable to a wide range of semiconducting electrodes and solid electrolytes, which allows to tailor and optimize the sensing pattern by tuning the material combination and conditions. The sensor performance is boosted by equipping a mixed-conducting perovskite electrode with reverse potentiometric polarity. A conceptual sensor with dual sensitive electrodes achieves superior three-dimensional (sub)ppm sensing and discrimination of humidity and seven hazardous gases (2-Ethylhexanol, ethanol, acetone, toluene, ammonia, carbon monoxide, and nitrogen dioxide), and enables accurate and early warning of fire hazards. Our findings offer possibilities to design simple, compact, inexpensive, and highly efficient multivariate gas sensors.
| S-EPMC10264437 | biostudies-literature
Project description:A novel hepatitis-associated virus named TT virus (TTV) has been isolated. However, its hepatotropism has not been proven. We have retrospectively analyzed the presence of TTV-DNA by polymerase chain reaction (PCR) and in situ hybridization in liver biopsies from 30 patients with liver disease (15 TTV-DNA-positive and 15 TTV-DNA-negative in serum), and prospectively in serum and liver from eight patients with normal liver histology. TTV-DNA was detected by PCR in the liver from the 15 patients with serum TTV-DNA and in serum and liver of two of the eight patients without liver disease. TTV-DNA titers in liver were 10 times higher than in serum, although no correlation between TTV-DNA titers in serum and liver were observed. In situ hybridization shows positive signals in the hepatocytes of the 17 patients infected by TTV but in none of the TTV-DNA-negative patients by PCR. No morphological changes were observed in the hepatocytes showing hybridization signals. The percentage of positive hepatocytes ranged from 2.1% to 30% and correlated with the TTV-DNA titers in liver (r = 0.54; P = 0.037). In conclusion, our results show that TTV is able to infect liver cells although they do not support a role for TTV in causing liver disease.
| S-EPMC1876900 | biostudies-literature
Project description:In this study, a molecularly imprinted polymer (MIP)-based screen-printed cell is developed for detecting phenoxy herbicides using 2-methyl-4-chlorophenoxyacetic acid (MCPA) as the template. MCPA is a phenoxy herbicide widely used since 1945 to control broadleaf weeds via growth regulation, primarily in pasture and cereal crops. The potentiometric cell consists of a silver/silver chloride pseudo-reference electrode and a graphite working electrode coated with a MIP film. The polymeric layer is thermally formed after drop-coating of a pre-polymeric mixture composed of the reagents at the following molar ratio: 1 MCPA: 15 MAA (methacrylic acid): 7 EGDMA (ethylene glycol dimethacrylate). After template removal, the recognition cavities function as the ionophore of a classical ion selective electrode (ISE) membrane. The detected ion is the deprotonated MCPA specie, negatively charged, so the measurements were performed in phosphate buffer at pH 5.5. A linear decrease of the potential with MCPA concentration, ranging from 4 × 10-8 to 1 × 10-6 mol L-1, was obtained. The detection limit and the limit of quantification were, respectively, 10 nmol L-1 and 40 nmol L-1. A Nernstian slope of about -59 mV/dec was achieved. The method has precision and LOD required for MCPA determination in contaminated environmental samples.
| S-EPMC9779394 | biostudies-literature
Project description:A highly sensitive silicon nanowire (SiNW)-based sensor device was developed using electron beam lithography integrated with complementary metal oxide semiconductor (CMOS) technology. The top-down fabrication approach enables the rapid fabrication of device miniaturization with uniform and strictly controlled geometric and surface properties. This study demonstrates that SiNW devices are well-aligned with different widths and numbers for pH sensing. The device consists of a single nanowire with 60 nm width, exhibiting an ideal pH responsivity (18.26 × 106 Ω/pH), with a good linear relation between the electrical response and a pH level range of 4-10. The optimized SiNW device is employed to detect specific single-stranded deoxyribonucleic acid (ssDNA) molecules. To use the sensing area, the sensor surface was chemically modified using (3-aminopropyl) triethoxysilane and glutaraldehyde, yielding covalently linked nanowire ssDNA adducts. Detection of hybridized DNA works by detecting the changes in the electrical current of the ssDNA-functionalized SiNW sensor, interacting with the targeted ssDNA in a label-free way. The developed biosensor shows selectivity for the complementary target ssDNA with linear detection ranging from 1.0 × 10-12 M to 1.0 × 10-7 M and an attained detection limit of 4.131 × 10-13 M. This indicates that the use of SiNW devices is a promising approach for the applications of ion detection and biomolecules sensing and could serve as a novel biosensor for future biomedical diagnosis.
| S-EPMC9370444 | biostudies-literature
Project description:We report carbon nanotube network field-effect transistors (NTNFETs) that function as selective detectors of DNA immobilization and hybridization. NTNFETs with immobilized synthetic oligonucleotides have been shown to specifically recognize target DNA sequences, including H63D single-nucleotide polymorphism (SNP) discrimination in the HFE gene, responsible for hereditary hemochromatosis. The electronic responses of NTNFETs upon single-stranded DNA immobilization and subsequent DNA hybridization events were confirmed by using fluorescence-labeled oligonucleotides and then were further explored for label-free DNA detection at picomolar to micromolar concentrations. We have also observed a strong effect of DNA counterions on the electronic response, thus suggesting a charge-based mechanism of DNA detection using NTNFET devices. Implementation of label-free electronic detection assays using NTNFETs constitutes an important step toward low-cost, low-complexity, highly sensitive and accurate molecular diagnostics.
| S-EPMC1347966 | biostudies-literature