A hydrodynamically focused stream as a dynamic template for site-specific electrochemical micropatterning of conducting polymers.
Ontology highlight
ABSTRACT:
SUBMITTER: Hou S
PROVIDER: S-EPMC2878188 | biostudies-literature | 2008
REPOSITORIES: biostudies-literature
Publications
A hydrodynamically focused stream as a dynamic template for site-specific electrochemical micropatterning of conducting polymers.
Hou Shuang S Wang Shutao S Yu Zeta T F ZT Zhu Nicole Q M NQ Liu Kan K Sun Jing J Lin Wei-Yu WY Shen Clifton K-F CK Fang Xiaohong X Tseng Hsian-Rong HR
Angewandte Chemie (International ed. in English) 20080101 6
Similar Datasets
Project description:Poly-3,4-ethylenedioxythiophene:polystyrene sulfonate (PEDOT:PSS) is a widely used conducting polymer with versatile applications in organic electronics. The addition of various salts during the preparation of PEDOT:PSS films can significantly influence their electrochemical properties. In this study, we systematically investigated the effects of different salt additives on the electrochemical properties, morphology, and structure of PEDOT:PSS films using a variety of experimental techniques, including cyclic voltammetry, electrochemical impedance spectroscopy, operando conductance measurements and in situ UV-VIS spectroelectrochemistry. Our results showed that the electrochemical properties of the films are closely related to the nature of the additives used and allowed us to establish a probable relationship with the Hofmeister series. The correlation coefficients obtained for the capacitance and Hofmeister series descriptors indicate a strong relationship between the salt additives and the electrochemical activity of PEDOT:PSS films. The work allows us to better understand the processes occurring within PEDOT:PSS films during modification with different salts. It also demonstrates the potential for fine-tuning the properties of PEDOT:PSS films by selecting appropriate salt additives. Our findings can contribute to the development of more efficient and tailored PEDOT:PSS-based devices for a wide range of applications, including supercapacitors, batteries, electrochemical transistors, and sensors.
| S-EPMC10255087 | biostudies-literature
Project description:Surging interests in point-of-device miniaturization have led to the development of metasurface-based optical components. Here, we demonstrate an electrically-driven ultracompact beam controller in the infrared spectral range. The effect benefits from diffraction gratings consisting of the commercially available conductive polymer PEDOT:PSS, which exhibits metal-to-insulator transition characteristics upon electrical biasing. By combining several metagratings with different superlattice periods in electrically isolated areas, our device enables diffraction beams at 16 and 33.5° when applying voltages of only ±1 V. Furthermore, no diffraction is realized by switching off the plasmonic property of the gratings. Dynamic control of electromagnetic wave via the presented platforms could be transformative for sensing, imaging, and communication applications.
| S-EPMC11501603 | biostudies-literature
Project description:Organic electrochemical transistors (OECTs) are promising devices for bioelectronics, such as biosensors. However, current cleanroom-based microfabrication of OECTs hinders fast prototyping and widespread adoption of this technology for low-volume, low-cost applications. To address this limitation, a versatile and scalable approach for ultrafast laser microfabrication of OECTs is herein reported, where a femtosecond laser to pattern insulating polymers (such as parylene C or polyimide) is first used, exposing the underlying metal electrodes serving as transistor terminals (source, drain, or gate). After the first patterning step, conducting polymers, such as poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS), or semiconducting polymers, are spin-coated on the device surface. Another femtosecond laser patterning step subsequently defines the active polymer area contributing to the OECT performance by disconnecting the channel and gate from the surrounding spin-coated film. The effective OECT width can be defined with high resolution (down to 2 µm) in less than a second of exposure. Micropatterning the OECT channel area significantly improved the transistor switching performance in the case of PEDOT:PSS-based transistors, speeding up the devices by two orders of magnitude. The utility of this OECT manufacturing approach is demonstrated by fabricating complementary logic (inverters) and glucose biosensors, thereby showing its potential to accelerate OECT research.
| S-EPMC11251563 | biostudies-literature
Project description:Developing high-performance microscale-energy storage devices is essential for next-generation smart electronics. Hybrid conducting polymers (HCPs) offer a promising solution to address the limitations of traditional conducting polymers, with poor cycling and mechanical stability. Here, we present a novel, template-free bicontinuous microemulsion (BME)-based method of fabricating highly cross-linked, continuously porous PPy-CoO electrodes for micro-pseudocapacitors (MPCs). The bicontinuous structure endows HCPs with tunable functionalities, mechanical flexibility, and efficient ion transport. The synergy between PPy's fast charge transfer and CoO's high charge-storage capacity boosts the electrochemical performance of device, with excellent areal capacitance of 30.58 mF cm-2, energy density of 4.22 µWh cm-2, and power density of 75.97 µW cm-2 at 0.2 mA cm-2. The device retains 106% capacitance under 180° bending and 83% capacitance retention after 10,000 cycles in a bent (180°) position. This study demonstrates the BME polymerization approach as a scalable, cost-effective, and versatile strategy for producing multifunctional 3D HCP composites for functional devices.
| S-EPMC11926238 | biostudies-literature
Project description:Organic electrochemical transistors (OECTs) based on conducting polymers have attracted significant attention in the field of biosensors. PEDOT:PSS and polyaniline (PANI) are representative conducting polymers used for OECTs. While there are many studies on PEDOT:PSS, there are not so many reports on PANI-based OECTs, and a detailed study to compare these two polymers has been desired. In this study, we investigated the fabrication conditions to produce the best performance in the OECTs using the above-mentioned two types of conducting polymers. The two main parameters were film thickness and film surface roughness. For PEDOT:PSS, the optimal conditions for fabricating thin films were a spin-coating rate of 3000 rpm and a DI water immersion time of 18 h. For PANI, the optimal conditions were a spin-coating rate of 3000 rpm and DI water immersion time of 5 s, and adding dodecylbenzenesulfonic acid (DBSA) was found to provide better OECT performances. The OECT performances based on PEDOT:PSS were superior to those based on PANI in terms of conductivity and transconductance, but PANI showed excellence in terms of film thickness and surface smoothness, leading to the good reproducibility of OECT performances.
| S-EPMC10747145 | biostudies-literature
Project description:Single Cell Force Spectroscopy was combined with Electrochemical-AFM to quantify the adhesion between live single cells and conducting polymers whilst simultaneously applying a voltage to electrically switch the polymer from oxidized to reduced states. The cell-conducting polymer adhesion represents the non-specific interaction between cell surface glycocalyx molecules and polymer groups such as sulfonate and dodecylbenzene groups, which rearrange their orientation during electrical switching. Single cell adhesion significantly increases as the polymer is switched from an oxidized to fully reduced state, indicating stronger cell binding to sulfonate groups as opposed to hydrophobic groups. This increase in single cell adhesion is concomitant with an increase in surface hydrophilicity and uptake of cell media, driven by cation movement, into the polymer film during electrochemical reduction. Binding forces between the glycocalyx and polymer surface are indicative of molecular-level interactions and during electrical stimulation there is a decrease in both the binding force and stiffness of the adhesive bonds. The study provides insight into the effects of electrochemical switching on cell adhesion at the cell-conducting polymer interface and is more broadly applicable to elucidating the binding of cell adhesion molecules in the presence of electrical fields and directly at electrode interfaces.
| S-EPMC4558606 | biostudies-literature
Project description:In this study, conducting polymers composed of polyaniline hydrochloric acid (PANI/HCl) with varying concentrations of a newly synthesized azo-azomethine dye (4-(((Z)-2-hydroxy-5-((Z)-(4-hydroxyphenyl)diazenyl)-3-methoxybenzylidene)amino)benzoic acid) were synthesized using a chemical oxidative polymerization technique. The synthesized azo-azomethine was characterized by FTIR, 1H-NMR, 13C-NMR, and HRMS. The effects of varying the concentration of the dopant azo-azomethine in PANI/HCl on its optical, structural, thermal, and electrical properties were examined using FTIR, UV-Vis, XRD, FESEM, TEM, cyclic voltammetry, and electrical impedance spectra. The results indicate that the optical, direct, and indirect band gaps of the doped polymers decreased from 4.48 and 3.96 eV to 3.91 and 2.49 eV, respectively. The crystalline structure and phase transitions in the doped polymers were examined using X-ray diffraction. Cyclic voltammetry demonstrated that the doped polymers exhibited higher electrochemical conductivity compared to the pure polymer, with the specific capacitance increasing from 161.17 to 816.9 F/g. The electrical impedance spectra revealed the bulk resistance and conductivity of the material. Among all the doped polymers, PANI/HCl with an azo-azomethine concentration of 5 × 10-5 M exhibited lower bulk resistance (10 Ω) and higher electrical conductivity (σ = 50.09 × 10-3 S cm-1).
| S-EPMC11300824 | biostudies-literature
Project description:By directly converting heat into electricity, thermoelectric effects provide a unique physical process from heat waste to energy harvesting. Requiring the highest possible power factor defined as α2σ, with the thermopower α and the electrical conductivity σ, such a technology necessitates the best knowledge of transport phenomena in order to be able to control and optimize both α and σ. While conducting polymers have already demonstrated their great potentiality with enhanced thermoelectric performance, the full understanding of the transport mechanisms in these compounds is still lacking. Here we show that the thermoelectric properties of one of the most promising conducting polymer, the poly(3,4-ethylenedioxythiophene) doped with tosylate ions (PEDOT-Tos), follows actually a very generic behavior with a scaling relation as α ∝ σ-1/4. Whereas conventional transport theories have failed to explain such an exponent, we demonstrate that it is in fact a characteristic of massless pseudo-relativistic quasiparticles, namely Dirac fermions, scattered by unscreened ionized impurities.
| S-EPMC7229021 | biostudies-literature
Project description:Conducting polymers are promising material candidates in diverse applications including energy storage, flexible electronics, and bioelectronics. However, the fabrication of conducting polymers has mostly relied on conventional approaches such as ink-jet printing, screen printing, and electron-beam lithography, whose limitations have hampered rapid innovations and broad applications of conducting polymers. Here we introduce a high-performance 3D printable conducting polymer ink based on poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) for 3D printing of conducting polymers. The resultant superior printability enables facile fabrication of conducting polymers into high resolution and high aspect ratio microstructures, which can be integrated with other materials such as insulating elastomers via multi-material 3D printing. The 3D-printed conducting polymers can also be converted into highly conductive and soft hydrogel microstructures. We further demonstrate fast and streamlined fabrications of various conducting polymer devices, such as a soft neural probe capable of in vivo single-unit recording.
| S-EPMC7105462 | biostudies-literature
Project description:Conducting polymers display a range of interesting properties, from electrical conduction to tunable optical absorption and mechanical flexibility, to name but a few. Their properties arise from positive charges (carbocations) on their conjugated backbone that are stabilised by counterions doped in the polymer matrix. In this research we report hydrolysis of these carbocations when poly(3,4-ethylenedioxy thiophene) is exposed to 1 mM aqueous salt solutions. Remarkably, two classes of anion interactions are revealed; anions that oxidise PEDOT via a doping process, and those that facilitate the SN1 hydrolysis of the carbocation to create hydroxylated PEDOT. A pKa of 6.4 for the conjugate acid of the anion approximately marks the transition between chemical oxidation and hydrolysis. PEDOT can be cycled between hydrolysis and oxidation by alternating exposure to different salt solutions. This has ramifications for using doped conducting polymers in aqueous environments (such as sensing, energy storage and biomedical devices).
| S-EPMC9814606 | biostudies-literature