Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Ultrafast nano-oscillators based on interlayer-bridged carbon nanoscrolls.

ABSTRACT: We demonstrate a viable approach to fabricating ultrafast axial nano-oscillators based on carbon nanoscrolls (CNSs) using molecular dynamics simulations. Initiated by a single-walled carbon nanotube (CNT), a monolayer graphene can continuously scroll into a CNS with the CNT housed inside. The CNT inside the CNS can oscillate along axial direction at a natural frequency of tens of gigahertz. We demonstrate an effective strategy to reduce the dissipation of the CNS-based nano-oscillator by covalently bridging the carbon layers in the CNS. We further demonstrate that such a CNS-based nano-oscillator can be excited and driven by an external AC electric field, and oscillate at more than 100 GHz. The CNS-based nano-oscillators not only offer a feasible pathway toward ultrafast nano-devices but also hold promise to enable nanoscale energy transduction, harnessing, and storage (e.g., from electric to mechanical).

SUBMITTER: Zhang Z

PROVIDER: S-EPMC3211983 | biostudies-literature | 2011 Jul

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Ultrafast nano-oscillators based on interlayer-bridged carbon nanoscrolls.

Zhang Zhao Z Li Teng T

Nanoscale research letters 20110725 1

We demonstrate a viable approach to fabricating ultrafast axial nano-oscillators based on carbon nanoscrolls (CNSs) using molecular dynamics simulations. Initiated by a single-walled carbon nanotube (CNT), a monolayer graphene can continuously scroll into a CNS with the CNT housed inside. The CNT inside the CNS can oscillate along axial direction at a natural frequency of tens of gigahertz. We demonstrate an effective strategy to reduce the dissipation of the CNS-based nano-oscillator by covalen ...[more]

PMID: 21787389

Similar Datasets

Efficient Synchronization of Dipolarly Coupled Vortex-Based Spin Transfer Nano-Oscillators.

Project description:Due to their nonlinear properties, spin transfer nano-oscillators can easily adapt their frequency to external stimuli. This makes them interesting model systems to study the effects of synchronization and brings some opportunities to improve their microwave characteristics in view of their applications in information and communication technologies and/or to design innovative computing architectures. So far, mutual synchronization of spin transfer nano-oscillators through propagating spinwaves and exchange coupling in a common magnetic layer has been demonstrated. Here we show that the dipolar interaction is also an efficient mechanism to synchronize neighbouring oscillators. We experimentally study a pair of vortex-based spin transfer nano-oscillators, in which mutual synchronization can be achieved despite a significant frequency mismatch between oscillators. Importantly, the coupling efficiency is controlled by the magnetic configuration of the vortices, as confirmed by an analytical model and micromagnetic simulations highlighting the physics at play in the synchronization process.

| S-EPMC4660301 | biostudies-literature

Hybrid spin Hall nano-oscillators based on ferromagnetic metal/ferrimagnetic insulator heterostructures

Project description:Spin-Hall nano-oscillators (SHNOs) are promising spintronic devices to realize current controlled GHz frequency signals in nanoscale devices for neuromorphic computing and creating Ising systems. However, traditional SHNOs devices based on transition metals have high auto-oscillation threshold currents as well as low quality factors and output powers. Here we demonstrate a new type of hybrid SHNO based on a permalloy (Py) ferromagnetic-metal nanowire and low-damping ferrimagnetic insulator, in the form of epitaxial lithium aluminum ferrite (LAFO) thin films. The superior characteristics of such SHNOs are associated with the excitation of larger spin-precession angles and volumes. We further find that the presence of the ferrimagnetic insulator enhances the auto-oscillation amplitude of spin-wave edge modes, consistent with our micromagnetic modeling. This hybrid SHNO expands spintronic applications, including providing new means of coupling multiple SHNOs for neuromorphic computing and advancing magnonics. Spin-hall nano-oscillators have potential for use in neuromorphic computing applications. Normally they are based around combination platinum and permalloy. Here, the authors combine a permalloy ferromagnet with a low magnetic damping ferrimagnet, leading to significantly improved performance.

| S-EPMC10015054 | biostudies-literature

Interlayer Nano-Dots Induced High-Rate Supercapacitors.

Project description:The fast OH- transfer between hydroxide layers is the key to enhancing the charge storage efficiency of layered double hydroxides (LDH)-based supercapacitors (SCs). Constructing interlayer reactive sites in LDH is much expected but still a huge challenge. In this work, CdS nano-dots (NDs) are introduced to interlayers of ultra-thin NiFe-LDH (denoted CdSinter. -NiFe-LDH), promoting the interlayer ions flow for higher redox activity. The excellent performance is not only due to the enlarged layer spacing (from 0.70 to 0.81 nm) but also stems from anchored interlayer reactive units and the undamaged original layered structure of LDH, which contribute to the improvement of OH- diffusion coefficient (1.6 × 10-8 cm2 s-1 ) and electrochemical active area (601 mF cm-2 ) better than that of CdS NDs on the surface of NiFe-LDH (2.1 × 10-9 cm2 s-1 and 350 mF cm-2 ). The champion CdSinter. -NiFe-LDH electrode displays high capacitance of 3330.0 F g-1 at 1 A g-1 and excellent retention capacitance of 90.9% at 10 A g-1 , which is better than the NiFe-LDH with CdS NDs on the surface (1966.6 F g-1 ). Moreover, the assembled asymmetric SCs (ASC) device demonstrate an outstanding energy density/power density (121.56 Wh kg-1 /754.5 W kg-1 ).

| S-EPMC10427355 | biostudies-literature

A simple mechanical technique to obtain carbon nanoscrolls from graphite nanoplatelets.

Project description:A simple approach for the bulk production of carbon nanoscrolls (CNSs) is described. This method is based on the application of shear-friction forces to convert graphite nanoplatelets into carbon nanoscrolls using a bi-axially oriented polypropylene (BOPP) surface. The combined action of shear and friction forces causes the exfoliation of graphite nanoplatelets and the simultaneous roll-up of graphite layers. Evidence of the CNS formation is given by optical microscopy, scanning electron microscopy, and transmission electron microscopy. These investigations reveal that the CNSs have a long tube-like and fusiform structure with a hollow core surrounded by few layers of graphene. Micro-Raman spectroscopy shows that the produced structures are not defect free, and optical spectroscopy reveals distinctive features due to the presence of two weak absorption bands at 224 and 324 nm.

| S-EPMC3849441 | biostudies-literature

Digital and analogue modulation and demodulation scheme using vortex-based spin torque nano-oscillators.

Project description:In conventional communications systems, information is transmitted by modulating the frequency, amplitude or phase of the carrier signal, which often occurs in a binary fashion over a very narrow bandwidth. Recently, ultra-wideband signal transmission has gained interest for local communications in technologies such as autonomous local sensor networks and on-chip communications, which presents a challenge for conventional electronics. Spin-torque nano-oscillators (STNOs) have been studied as a potentially low power highly tunable frequency source, and in this report we expand on this to show how a specific dynamic phase present in vortex-based STNOs makes them also well suited as Wideband Analogue Dynamic Sensors (WADS). This multi-functionality of the STNOs is the basis of a new modulation and demodulation scheme, where nominally identical devices can be used to transmit information in both a digital or analogue manner, with the potential to allow the highly efficient transmittance of data.

| S-EPMC7341870 | biostudies-literature

Probing the Formation of Dark Interlayer Excitons via Ultrafast Photocurrent.

Project description:Optically dark excitons determine a wide range of properties of photoexcited semiconductors yet are hard to access via conventional time-resolved spectroscopies. Here, we develop a time-resolved ultrafast photocurrent technique (trPC) to probe the formation dynamics of optically dark excitons. The nonlinear nature of the trPC makes it particularly sensitive to the formation of excitons occurring at the femtosecond time scale after the excitation. As a proof of principle, we extract the interlayer exciton formation time of 0.4 ps at 160 μJ/cm2 fluence in a MoS2/MoSe2 heterostructure and show that this time decreases with fluence. In addition, our approach provides access to the dynamics of carriers and their interlayer transport. Overall, our work establishes trPC as a technique to study dark excitons in various systems that are hard to probe by other approaches.

| S-EPMC10603811 | biostudies-literature

Blood compatible carbon nanotubes--nano-based neoproteoglycans.

Project description:Although nanotechnology has provided a rich variety of nanomaterials (1-100 nm) for in vivo medical applications, the blood compatibility of all these nanobiomaterials is still largely unexamined. Here, we report the preparation of blood-compatible carbon nanotubes (CNTs) that potentially represent the building blocks for nanodevices having in vivo applications. Activated partial thromboplastin time (APTT) and thromboelastography (TEG) studies prove that heparinization can significantly enhance the blood compatibility of nanomaterials.

| S-EPMC4114241 | biostudies-literature

Ultrafast multi-focus 3-D nano-fabrication based on two-photon polymerization.

Project description:Two-photon polymerization (TPP) is the most precise 3-D printing process that has been used to create many complex structures for advanced photonic and nanoscale applications. However, to date the technology still remains a laboratory tool due to its high operation cost and limited fabrication rate, i.e., serial laser scanning process. Here we present a revolutionary laser nanofabrication process based on TPP and an ultrafast random-access digital micromirror device (DMD) scanner. By exploiting binary holography, the DMD scanner can simultaneously generate and individually control one to tens of laser foci for parallel nanofabrication at 22.7 kHz. Complex 3-D trusses and woodpile structures have been fabricated via single or multi-focus processes, showing a resolution of ~500 nm. The nanofabrication system may be used for largescale nano-prototyping or creation of complex structures, e.g., overhanging structures, that cannot be easily fabricated via conventional raster-scanning-based systems, bringing significant impact to the world of nanomanufacturing.

| S-EPMC6522551 | biostudies-literature

Ultrafast single photon emitting quantum photonic structures based on a nano-obelisk.

Project description:A key issue in a single photon source is fast and efficient generation of a single photon flux with high light extraction efficiency. Significant progress toward high-efficiency single photon sources has been demonstrated by semiconductor quantum dots, especially using narrow bandgap materials. Meanwhile, there are many obstacles, which restrict the use of wide bandgap semiconductor quantum dots as practical single photon sources in ultraviolet-visible region, despite offering free space communication and miniaturized quantum information circuits. Here we demonstrate a single InGaN quantum dot embedded in an obelisk-shaped GaN nanostructure. The nano-obelisk plays an important role in eliminating dislocations, increasing light extraction, and minimizing a built-in electric field. Based on the nano-obelisks, we observed nonconventional narrow quantum dot emission and positive biexciton binding energy, which are signatures of negligible built-in field in single InGaN quantum dots. This results in efficient and ultrafast single photon generation in the violet color region.

| S-EPMC3701894 | biostudies-literature

Voltage-driven gigahertz frequency tuning of spin Hall nano-oscillators.

Project description:Spin Hall nano-oscillators (SHNOs) exploiting current-driven magnetization auto-oscillation have recently received much attention because of their potential for neuromorphic computing. Widespread applications of neuromorphic devices with SHNOs require an energy-efficient method of tuning oscillation frequency over broad ranges and storing trained frequencies in SHNOs without the need for additional memory circuitry. While the voltage-driven frequency tuning of SHNOs has been demonstrated, it was volatile and limited to megahertz ranges. Here, we show that the frequency of SHNOs is controlled up to 2.1 GHz by an electric field of 1.25 MV/cm. The large frequency tuning is attributed to the voltage-controlled magnetic anisotropy (VCMA) in a perpendicularly magnetized Ta/Pt/[Co/Ni]n/Co/AlOx structure. Moreover, the non-volatile VCMA effect enables cumulative control of the frequency using repetitive voltage pulses which mimic the potentiation and depression functions of biological synapses. Our results suggest that the voltage-driven frequency tuning of SHNOs facilitates the development of energy-efficient neuromorphic devices.

| S-EPMC9246901 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data