Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Improved recovery of Bacillus spores from nonporous surfaces with cotton swabs over foam, nylon, or polyester, and the role of hydrophilicity of cotton in governing the recovery efficiency.

ABSTRACT: Evaluating different swabbing materials for spore recovery efficiency (RE) from steel surfaces, we recorded the maximum RE (71%) of 10(7) Bacillus subtilis spores with Tulips cotton buds, followed by Johnson's cotton buds and standard Hi-Media cotton, polyester, nylon, and foam (23%) swabs. Among cotton swabs, instant water-absorbing capacity or the hydrophilicity index appeared to be the major indicator of RE, as determined by testing three more brands. Tulips swabs worked efficiently across diverse nonporous surfaces and on different Bacillus spp., registering 65 to 77% RE.

SUBMITTER: Thomas P

PROVIDER: S-EPMC3536098 | biostudies-literature | 2013 Jan

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Improved recovery of Bacillus spores from nonporous surfaces with cotton swabs over foam, nylon, or polyester, and the role of hydrophilicity of cotton in governing the recovery efficiency.

Thomas Pious P Mujawar Mohammed M MM Upreti Reshmi R Sekhar Aparna C AC

Applied and environmental microbiology 20121019 1

Evaluating different swabbing materials for spore recovery efficiency (RE) from steel surfaces, we recorded the maximum RE (71%) of 10(7) Bacillus subtilis spores with Tulips cotton buds, followed by Johnson's cotton buds and standard Hi-Media cotton, polyester, nylon, and foam (23%) swabs. Among cotton swabs, instant water-absorbing capacity or the hydrophilicity index appeared to be the major indicator of RE, as determined by testing three more brands. Tulips swabs worked efficiently across di ...[more]

PMID: 23087040

Similar Datasets

A comparison of health care worker-collected foam and polyester nasal swabs in convalescent COVID-19 patients.

Project description:Both polyester and foam nasal swabs were collected from convalescent COVID-19 patients at a single visit and stored in viral transport media (VTM), saline or dry. Sensitivity of each swab material and media combination were estimated, three by three tables were constructed to measure polyester and foam concordance, and cycle threshold (Ct) values were compared. 126 visits had polyester and foam swabs stored in viral transport media (VTM), 51 had swabs stored in saline, and 63 had a foam swab in VTM and a polyester swab stored in a dry tube. Polyester and foam swabs had an estimated sensitivity of 87.3% and 94.5% respectively in VTM, 87.5% and 93.8% respectively in saline, and 75.0% and 90.6% respectively for dry polyester and foam VTM. Polyester and foam Ct values were correlated, but polyester showed decreased performance for cases with a viral load near the detection threshold and higher Ct values on average.

| S-EPMC7591034 | biostudies-literature

Highly Selective Enzymatic Recovery of Building Blocks from Wool-Cotton-Polyester Textile Waste Blends.

Project description:In Europe, most of the discarded and un-wearable textiles are incinerated or landfilled. In this study, we present an enzyme-based strategy for the recovery of valuable building blocks from mixed textile waste and blends as a circular economy concept. Therefore, model and real textile waste were sequentially incubated with (1) protease for the extraction of amino acids from wool components (95% efficiency) and (2) cellulases for the recovery of glucose from cotton and rayon constituents (85% efficiency). The purity of the remaining poly(ethylene terephthalate) (PET) unaltered by the enzymatic treatments was assessed via Fourier-transformed infrared spectroscopy. Amino acids recovered from wool were characterized via elementary and molecular size analysis, while the glucose resulting from the cotton hydrolysis was successfully converted into ethanol by fermentation with Saccharomyces cerevisiae. This work demonstrated that the step-wise application of enzymes can be used for the recovery of pure building blocks (glucose) and their further reuse in fermentative processes.

| S-EPMC6403871 | biostudies-literature

Programming aliphatic polyester degradation by engineered bacterial spores.

Project description:Enzymatic degradation of plastics is a sustainable approach to addressing the growing issue of plastic accumulation. The primary challenges for using enzymes as catalysts are issues with their stability and recyclability, further exacerbated by their costly production and delicate structures. Here, we demonstrate an approach that leverages engineered spores that display target enzymes in high density on their surface to catalyze aliphatic polyester degradation and create self-degradable materials. Engineered spores display recombinant enzymes on their surface, eliminating the need for costly purification processes. The intrinsic physical and biological characteristics of spores enable easy separation from the reaction mixture, repeated reuse, and renewal. Engineered spores displaying lipases completely degrade aliphatic polyesters and retain activity through four cycles, with full activity recovered through germination and sporulation. Directly incorporating spores into polyesters results in robust materials that are completely degradable. Our study offers a straightforward and sustainable biocatalytic approach to plastic degradation.

| S-EPMC11275931 | biostudies-literature

The Chitosan Implementation into Cotton and Polyester/Cotton Blend Fabrics.

Project description:Chitosan is an environmentally friendly agent that is used to achieve the antimicrobial properties of textiles. Nowadays, the binding of chitosan to the textiles has been thoroughly researched due to the increasing demands on the stability of achieved properties during the textile care processes. Most crosslinking agents for chitosan are not safe for humans or environment, such as glutaric aldehyde (GA) and formaldehyde derivatives. Eco-friendly polycarboxyilic acids (PCAs) are usually used in after-treatment. In this work, chitosan powder was dissolved in citric acid with sodium hydrophosphite (SHP) as a catalyst. Standard cotton (CO) and polyester/cotton (PES/CO) fabrics were pretreated in 20% NaOH, similar to mercerization, in order to open the structure of the cotton fibers and hydrolyze polyester fibers, continued by finishing in the gelatin chitosan bath. Afterwards, the hot rinsing process, followed by drying and curing, closed the achieved structure. The main objective was to achieve durable antimicrobial properties to multiple maintenance cycles CO and PES/CO fabric in order to apply it in a hospital environment. The characterization of fabrics was performed after treatment, first and fifth washing cycles according ISO 6330:2012 by field emission scanning electron microscopy (FE-SEM), Fourier transform infrared spectroscopy (FTIR-ATR), electrokinetic analysis (EKA), by the determination of tensile properties and mechanical damage (wear), and the antimicrobial activity. The application of 20% NaOH led to the swelling and mercerization of cotton cellulose, and hydrolysis of polyester, resulting in better mechanical properties. It has been confirmed that the chitosan particles were well implemented into the cotton fiber and onto to the polyester component of PES/CO blend. The presence of chitosan was confirmed after five washing cycles, but in lower quantity. However, achieved antimicrobial activity is persistent.

| S-EPMC7178377 | biostudies-literature

Evaluation of methods to improve the extraction and recovery of DNA from cotton swabs for forensic analysis.

Project description:Samples for forensic DNA analysis are often collected from a wide variety of objects using cotton or nylon tipped swabs. Testing has shown that significant quantities of DNA are retained on the swab, however, and subsequently lost. When processing evidentiary samples, the recovery of the maximum amount of available DNA is critical, potentially dictating whether a usable profile can be derived from a piece of evidence or not. The QIAamp DNA Investigator extraction kit was used with its recommended protocol for swabs (one hour incubation at 56°C) as a baseline. Results indicate that over 50% of the recoverable DNA may be retained on the cotton swab tip, or otherwise lost, for both blood and buccal cell samples when using this protocol. The protocol's incubation time and temperature were altered, as was incubating while shaking or stationary to test for increases in recovery efficiency. An additional step was then tested that included periodic re-suspension of the swab tip in the extraction buffer during incubation. Aliquots of liquid blood or a buccal cell suspension were deposited and dried on cotton swabs and compared with swab-less controls. The concentration of DNA in each extract was quantified and STR analysis was performed to assess the quality of the extracted DNA. Stationary incubations and those performed at 65°C did not result in significant gains in DNA yield. Samples incubated for 24 hours yielded less DNA. Increased yields were observed with three and 18 hour incubation periods. Increases in DNA yields were also observed using a swab re-suspension method for both cell types. The swab re-suspension method yielded an average two-fold increase in recovered DNA yield with buccal cells and an average three-fold increase with blood cells. These findings demonstrate that more of the DNA collected on swabs can be recovered with specific protocol alterations.

| S-EPMC4280208 | biostudies-literature

Pyrolysis for Nylon 6 Monomer Recovery from Teabag Waste.

Project description:In this work, we used pyrolysis to treat teabag waste (TBW). Changes in the pyrolysis temperature affected the composition and yield of the products. For example, more non-condensable gases and less char were produced with an increase in the pyrolysis temperature. Pyrolysis conducted under a nitrogen environment yielded caprolactam at temperatures between 400 and 700 °C. An increase in the pyrolysis temperature from 400 to 500 °C increased the caprolactam yield from 3.1 to 6.2 wt.%. At 700 °C, the yield decreased to 4.6 wt.%. The highest caprolactam yield (i.e., 6.2 wt.% at 500 °C) was equivalent to 59.2 wt.% on the basis of the weight of the non-biomass part of the TBW. The pyrolytic products other than caprolactam (e.g., combustible gases, pyrolytic liquid, and char) can function as fuels to supply energy during pyrolysis in order to increase and maintain the temperature. The higher heating values (HHVs) of the combustible gases and pyrolytic liquid produced at 500 °C were 7.7 and 8.3 MJ kg-1, respectively. The HHV of the char produced at 500 °C was 23 MJ kg-1, which is comparable to the HHV of coal. This work will help to develop effective pyrolysis processes to valorize everyday waste by recovering value-added chemicals such as polymer monomers and by producing alternative fuels.

| S-EPMC7697768 | biostudies-literature

Uncoupling Foam Fractionation and Foam Adsorption for Enhanced Biosurfactant Synthesis and Recovery.

Project description:The production of biosurfactants is often hampered by excessive foaming in the bioreactor, impacting system scale-up and downstream processing. Foam fractionation was proposed to tackle this challenge by combining in situ product removal with a pre-purification step. In previous studies, foam fractionation was coupled to bioreactor operation, hence it was operated at suboptimal parameters. Here, we use an external fractionation column to decouple biosurfactant production from foam fractionation, enabling continuous surfactant separation, which is especially suited for system scale-up. As a subsequent product recovery step, continuous foam adsorption was integrated into the process. The configuration is evaluated for rhamnolipid (RL) or 3-(3-hydroxyalkanoyloxy)alkanoic acid (HAA, i.e., RL precursor) production by recombinant non-pathogenic Pseudomonas putida KT2440. Surfactant concentrations of 7.5 gRL/L and 2.0 gHAA/L were obtained in the fractionated foam. 4.7 g RLs and 2.8 g HAAs could be separated in the 2-stage recovery process within 36 h from a 2 L culture volume. With a culture volume scale-up to 9 L, 16 g RLs were adsorbed, and the space-time yield (STY) increased by 31% to 0.21 gRL/L·h. We demonstrate a well-performing process design for biosurfactant production and recovery as a contribution to a vital bioeconomy.

| S-EPMC7766737 | biostudies-literature

Microbial odor profile of polyester and cotton clothes after a fitness session.

Project description:Clothing textiles protect our human body against external factors. These textiles are not sterile and can harbor high bacterial counts as sweat and bacteria are transmitted from the skin. We investigated the microbial growth and odor development in cotton and synthetic clothing fabrics. T-shirts were collected from 26 healthy individuals after an intensive bicycle spinning session and incubated for 28 h before analysis. A trained odor panel determined significant differences between polyester versus cotton fabrics for the hedonic value, the intensity, and five qualitative odor characteristics. The polyester T-shirts smelled significantly less pleasant and more intense, compared to the cotton T-shirts. A dissimilar bacterial growth was found in cotton versus synthetic clothing textiles. Micrococci were isolated in almost all synthetic shirts and were detected almost solely on synthetic shirts by means of denaturing gradient gel electrophoresis fingerprinting. A selective enrichment of micrococci in an in vitro growth experiment confirmed the presence of these species on polyester. Staphylococci were abundant on both cotton and synthetic fabrics. Corynebacteria were not enriched on any textile type. This research found that the composition of clothing fibers promotes differential growth of textile microbes and, as such, determines possible malodor generation.

| S-EPMC4249026 | biostudies-literature

High-Performance Triboelectric Nanogenerators Based on Commercial Textiles: Electrospun Nylon 66 Nanofibers on Silk and PVDF on Polyester.

Project description:A high-performance textile triboelectric nanogenerator is developed based on the common commercial fabrics silk and polyester (PET). Electrospun nylon 66 nanofibers were used to boost the tribo-positive performance of silk, and a poly(vinylidene difluoride) (PVDF) coating was deployed to increase the tribo-negativity of PET. The modifications confer a very significant boost in performance: output voltage and short-circuit current density increased ∼17 times (5.85 to 100 V) and ∼16 times (1.6 to 24.5 mA/m2), respectively, compared with the Silk/PET baseline. The maximum power density was 280 mW/m2 at a 4 MΩ resistance. The performance boost likely results from enhancing the tribo-positivity (and tribo-negativity) of the contact layers and from increased contact area facilitated by the electrospun nanofibers. Excellent stability and durability were demonstrated: the nylon nanofibers and PVDF coating provide high output, while the silk and PET substrate fabrics confer strength and flexibility. Rapid capacitor charging rates of 0.045 V/s (2 μF), 0.031 V/s (10 μF), and 0.011 V/s (22 μF) were demonstrated. Advantages include high output, a fully textile structure with excellent flexibility, and construction based on cost-effective commercial fabrics. The device is ideal as a power source for wearable electronic devices, and the approach can easily be deployed for other textiles.

| S-EPMC9542703 | biostudies-literature

Protocol for real-time PCR identification of anthrax spores from nasal swabs after broth enrichment.

Project description:A mass-screening protocol for the diagnosis of anthrax from nasal swabs based on an enrichment step in liquid medium was devised. Incubation for growth was performed in autoclavable vials and racks which allow real-time PCR analysis of sterilized cultures. A dual-color PCR was set up with primers and probes for the chromosomal marker rpoB and the plasmid marker lef. Specific primer and probe sets were designed for the differentiation of Bacillus anthracis from B. cereus and for the differentiation of the Sterne vaccine strain from field isolates and the Ames strain, which was used in the recent anthrax bioterrorist attack. The present protocol thus combines the high specificity and sensitivity of real-time PCR with excellent biosafety and the low hands-on time necessary for the processing of large numbers of samples, which is extremely important during control programs involving the processing of large numbers of samples.

| S-EPMC139649 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data