Origin of low CO2 selectivity on platinum in the direct ethanol fuel cell.
Ontology highlight
ABSTRACT:
SUBMITTER: Kavanagh R
PROVIDER: S-EPMC3625737 | biostudies-literature | 2012 Feb
REPOSITORIES: biostudies-literature
Publications
Origin of low CO2 selectivity on platinum in the direct ethanol fuel cell.
Kavanagh Richard R Cao Xiao-Ming XM Lin Wen-Feng WF Hardacre Christopher C Hu P P
Angewandte Chemie (International ed. in English) 20120102 7
Similar Datasets
Project description:The development of efficient catalysts for ethanol oxidation in alkaline medium requires a synthetic approach that may prevent the surfactant molecules from being adsorbed at the catalytic sites and decreasing the electrochemical performance of the final direct ethanol fuel cell. Toward this goal, the recently reported surfactant-less Bromide Anion Exchange (BAE) method, appears as a promising route to conveniently aim at preparing PtRh alloys dispersed on carbon substrates. The catalysts prepared herein by the BAE method were characterized physicochemically to obtain structural information on the PtRh/C nanomaterials, their morphology (size and shape), and their chemical and surface composition. Electrochemical behavior and properties of these electrodes were then investigated in a half-cell before the implementation of a direct ethanol fuel cell (DEFC) in a home-made anion exchange membrane Teflon cell. The analysis of the electrolytic solution in the anodic compartment by chromatography revealed that acetate was the major reaction product and the carbonate amount increased with the Rh content in the bimetallic composition. With 2.8-3.6 nm particle sizes, the Pt50Rh50/C catalyst exhibited the highest activity towards the ethanol electrooxidation.
| S-EPMC9056937 | biostudies-literature
Project description:We developed a high-power abiotic direct glucose fuel cell system using a Au-Pt bimetallic anode catalyst. The high power generation (95.7 mW cm-2) was attained by optimizing operating conditions such as the composition of a bimetallic anode catalyst, loading amount of the metal catalyst on a carbon support, ionomer/carbon weight ratio when the catalyst was applied to the anode, glucose and KOH concentrations in the fuel solution, and operating temperature and flow rate of the fuel solution. It was found that poly(N-vinyl-2-pyrrolidone)-stabilized Au80Pt20 nanoparticles (mean diameter 1.5 nm) on a carbon (Ketjen Black 600) support function as a highly active anode catalyst for the glucose electrooxidation. The ionomer/carbon weight ratio also greatly affects the cell properties, which was found to be optimal at 0.2. As for the glucose concentration, a maximum cell power was derived at 0.4-0.6 mol dm-3. A high KOH concentration (4.0 mol dm-3) was preferable for deriving the maximum power. The cell power increased with the increasing flow rate of the glucose solution up to 50 cm3 min-1 and leveled off thereafter. At the optimal condition, the maximum power density and corresponding cell voltage of 58.2 mW cm-2 (0.36 V) and 95.7 mW cm-2 (0.34 V) were recorded at 298 and 328 K, respectively.
| S-EPMC6643607 | biostudies-literature
Project description:Platinum is the most commonly used catalyst in fuel cell application. However, platinum is very expensive, thus limits the commercialisation of fuel cell system due to the cost factor. This study introduces a biosynthesis platinum from plant extracts that can reduce the cost of platinum production compared to the conventional method and the hazardous during the production of the catalyst. The biogenic platinum was tested on a Direct Methanol Fuel Cell. Advanced biogenic of Pt nano-cluster was synthesized through a novel and facile of one-pot synthesis bio-reduction derived from natural source in the form of plant extracts as reducing agent. Several selected plant extracts drawn from agricultural waste such as banana peel, pineapple peels and sugarcane bagasse extracts were comparatively evaluated on the ability of phytochemical sources of polyphenols rich for the development of single-step synthesis for Pt NPs. Notably, the biogenic Pt NPs from sugar cane bagasse has superior electro-catalytic activity, the enhanced utilization efficiency of Pt and appreciable stability towards methanol oxidation reaction, whose ECSA value approximates 94.58 m2g-1, mass activity/specific activity (398.20 mAmg-1/0.8471 mA/cm2 Pt) which greater than commercial Pt black (158.12 mAmg-1/1.41 mA/cm2 Pt).
| S-EPMC7753966 | biostudies-literature
Project description:Fuel ethanol is now considered a global energy commodity that is fully competitive with gasoline. We have determined genome copy number differences that are common to five industrially important fuel ethanol yeast strains responsible for the production of billions of gallons of fuel ethanol per year from sugarcane. The fuel strains used were CAT1, BG1, PE2, SA1, and VR1 (note that two independent isolates were analyzed, denoted by "-1" and "-2"). These array-CGH data were compared with array-CGH data from nine other non-fuel industrial yeasts: An ale brewing strain ("Sc-ale"), four wine strains (GSY2A, GSY3A, GSY10A, GSY11B), and 4 bakers' yeast strains (GSY149, GSY150, GSY154, GSY155). Our results reveal significant amplifications of the telomeric SNO and SNZ genes only in the fuel strains, whose protein products are involved in the biosynthesis of vitamins B6 (pyridoxine) and B1 (thiamin). We show that these amplifications allow these yeasts to grow efficiently, especially at high sugar concentrations, regardless of the presence or absence of either of the two vitamins. Our results reveal important genetic adaptations that have been selected for in the industrial environment, which may be required for the efficient fermentation of biomass-derived sugars from other renewable feedstocks. A strain or line experiment design type assays differences between multiple strains, cultivars, serovars, isolates, lines from organisms of a single species. Strain Name: fuel strains used for aCGH Strain_or_line_design
2010-06-25 | E-GEOD-13875 | biostudies-arrayexpress
Project description:Pt dissolution has already been intensively studied in aqueous model systems and many mechanistic insights have been gained. Nevertheless, transfer of new knowledge to real-world fuel cell systems is still a significant challenge. To close this gap, we present a novel in situ method combining a gas diffusion electrode (GDE) half-cell with inductively coupled plasma mass spectrometry (ICP-MS). With this setup, Pt dissolution in realistic catalyst layers and the transport of dissolved Pt species through Nafion membranes were evaluated directly. We observed that 1) specific Pt dissolution increased significantly with decreasing Pt loading, 2) in comparison to experiments on aqueous model systems with flow cells, the measured dissolution in GDE experiments was considerably lower, and 3) by adding a membrane onto the catalyst layer, Pt dissolution was reduced even further. All these phenomena are attributed to the varying mass transport conditions of dissolved Pt species, influencing re-deposition and equilibrium potential.
| S-EPMC8048487 | biostudies-literature
Project description:Fuel ethanol is now considered a global energy commodity that is fully competitive with gasoline. We have determined genome copy number differences that are common to five industrially important fuel ethanol yeast strains responsible for the production of billions of gallons of fuel ethanol per year from sugarcane. The fuel strains used were CAT1, BG1, PE2, SA1, and VR1 (note that two independent isolates were analyzed, denoted by "-1" and "-2"). These array-CGH data were compared with array-CGH data from nine other non-fuel industrial yeasts: An ale brewing strain ("Sc-ale"), four wine strains (GSY2A, GSY3A, GSY10A, GSY11B), and 4 bakers' yeast strains (GSY149, GSY150, GSY154, GSY155). Our results reveal significant amplifications of the telomeric SNO and SNZ genes only in the fuel strains, whose protein products are involved in the biosynthesis of vitamins B6 (pyridoxine) and B1 (thiamin). We show that these amplifications allow these yeasts to grow efficiently, especially at high sugar concentrations, regardless of the presence or absence of either of the two vitamins. Our results reveal important genetic adaptations that have been selected for in the industrial environment, which may be required for the efficient fermentation of biomass-derived sugars from other renewable feedstocks. A strain or line experiment design type assays differences between multiple strains, cultivars, serovars, isolates, lines from organisms of a single species. Strain Name: fuel strains used for aCGH
2009-09-24 | GSE13875 | GEO
Project description:Platinum-Ruthenium (PtRu) bimetallic nanoparticles are promising catalysts for methanol oxidation reaction (MOR) required by direct methanol fuel cells. However, existing catalyst synthesis methods have difficulty controlling their composition and structures. Here, a direct Joule heating method to yield highly active and stable PtRu catalysts for MOR is shown. The optimized Joule heating condition at 1000 °C over 50 microseconds produces uniform PtRu nanoparticles (6.32 wt.% Pt and 2.97 wt% Ru) with an average size of 2.0 ± 0.5 nanometers supported on carbon black substrates. They have a large electrochemically active surface area (ECSA) of 239 m2 g-1 and a high ECSA normalized specific activity of 0.295 mA cm-2. They demonstrate a peak mass activity of 705.9 mA mgPt -1 for MOR, 2.8 times that of commercial 20 wt.% platinum/carbon catalysts, and much superior to PtRu catalysts obtained by standard hydrothermal synthesis. Theoretical calculation results indicate that the superior catalytic activity can be attributed to modified Pt sites in PtRu nanoparticles, enabling strong methanol adsorption and weak carbon monoxide binding. Further, the PtRu catalyst demonstrates excellent stability in two-electrode methanol fuel cell tests with 85.3% current density retention and minimum Pt surface oxidation after 24 h.
| S-EPMC11840475 | biostudies-literature
Project description:A novel strategy for the qualitative analysis of carbohydrates is developed, utilizing a direct catalytic fuel cell (DCFC) as a sensor, combined with chemometric tools for processing the resulting response curves. Specifically, carbohydrate solutions were incubated with yeast to produce alcohol, and the corresponding current decay trends were measured using a direct catalytic fuel cell designed for ethanol detection. Multiple data processing approaches were then evaluated. Initially, the entire set of data points from the response curves was analyzed using principal component analysis (PCA). To reduce analysis time, chemometric processing was subsequently restricted to the initial portion of the response curves. Finally, to enhance the results, the current decay curves were analyzed in conjunction with the linear fitting parameters derived from the quasi-linear region of the initial response curves, utilizing the common dimension (ComDim) algorithm.
| S-EPMC11853580 | biostudies-literature
Project description:Direct ethanol fuel cells have been widely investigated as nontoxic and low-corrosive energy conversion devices with high energy and power densities. It is still challenging to develop high-activity and durable catalysts for a complete ethanol oxidation reaction on the anode and accelerated oxygen reduction reaction on the cathode. The materials' physics and chemistry at the catalytic interface play a vital role in determining the overall performance of the catalysts. Herein, we propose a Pd/Co@N-C catalyst that can be used as a model system to study the synergism and engineering at the solid-solid interface. Particularly, the transformation of amorphous carbon to highly graphitic carbon promoted by cobalt nanoparticles helps achieve the spatial confinement effect, which prevents structural degradation of the catalysts. The strong catalyst-support and electronic effects at the interface between palladium and Co@N-C endow the electron-deficient state of palladium, which enhances the electron transfer and improved activity/durability. The Pd/Co@N-C delivers a maximum power density of 438 mW cm-2 in direct ethanol fuel cells and can be operated stably for more than 1000 hours. This work presents a strategy for the ingenious catalyst structural design that will promote the development of fuel cells and other sustainable energy-related technologies.
| S-EPMC10008627 | biostudies-literature
Project description:Herein, we prepared a series of nanocomposite membranes based on chitosan (CS) and three compositionally and structurally different N-doped graphene derivatives. Two-dimensional (2D) and quasi 1D N-doped reduced graphene oxides (N-rGO) and nanoribbons (N-rGONRs), as well as 3D porous N-doped graphitic polyenaminone particles (N-pEAO), were synthesized and characterized fully to confirm their graphitic structure, morphology, and nitrogen (pyridinic, pyrrolic, and quaternary or graphitic) group contents. The largest (0.07%) loading of N-doped graphene derivatives impacted the morphology of the CS membrane significantly, reducing the crystallinity, tensile properties, and the KOH uptake, and increasing (by almost 10-fold) the ethanol permeability. Within direct alkaline ethanol test cells, it was found that CS/N rGONRs (0.07 %) membrane (Pmax. = 3.7 mWcm-2) outperformed the pristine CS membrane significantly (Pmax. = 2.2 mWcm-2), suggesting the potential of the newly proposed membranes for application in direct ethanol fuel cells.
| S-EPMC7916145 | biostudies-literature