Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Effects of nanopillar array diameter and spacing on cancer cell capture and cell behaviors.

ABSTRACT: While substrates with nanopillars (NPs) have emerged as promising platforms for isolation of circulating tumor cells (CTCs), the influence of diameter and spacing of NPs on CTC capture is still unclear. In this paper, CTC-capture yield and cell behaviors have been investigated by using antibody functionalized NPs of various diameters (120-1100 nm) and spacings (35-800 nm). The results show a linear relationship between the cell capture yield and effective contact area of NP substrates where a NP array of small diameter and reasonable spacing is preferred; however, spacing that is too small or too large adversely impairs the capture efficiency and specificity, respectively. In addition, the formation of pseudopodia between captured cells and the substrate is found to be dependent not only on cell adhesion status but also on elution strength and shear direction. These findings provide essential guidance in designing NP substrates for more efficient capture of CTCs and manipulation of cytomorphology in future.

SUBMITTER: Wang S

PROVIDER: S-EPMC4194151 | biostudies-literature | 2014 Nov

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Effects of nanopillar array diameter and spacing on cancer cell capture and cell behaviors.

Wang Shunqiang S Wan Yuan Y Liu Yaling Y

Nanoscale 20141101 21

While substrates with nanopillars (NPs) have emerged as promising platforms for isolation of circulating tumor cells (CTCs), the influence of diameter and spacing of NPs on CTC capture is still unclear. In this paper, CTC-capture yield and cell behaviors have been investigated by using antibody functionalized NPs of various diameters (120-1100 nm) and spacings (35-800 nm). The results show a linear relationship between the cell capture yield and effective contact area of NP substrates where a NP ...[more]

PMID: 25137436

Similar Datasets

Effects of Nanopillar Size and Spacing on Mechanical Perturbation and Bactericidal Killing Efficiency.

Project description:Nanopatterned surfaces administer antibacterial activity through contact-induced mechanical stresses and strains, which can be modulated by changing the nanopattern's radius, spacing and height. However, due to conflicting recommendations throughout the theoretical literature with poor agreement to reported experimental trends, it remains unclear whether these key dimensions-particularly radius and spacing-should be increased or decreased to maximize bactericidal efficiency. It is shown here that a potential failure of biophysical models lies in neglecting any out-of-plane effects of nanopattern contact. To highlight this, stresses induced by a nanopattern were studied via an analytical model based on minimization of strain and adhesion energy. The in-plane (areal) and out-of-plane (contact pressure) stresses at equilibrium were derived, as well as a combined stress (von Mises), which comprises both. Contour plots were produced to illustrate which nanopatterns elicited the highest stresses over all combinations of tip radius between 0 and 100 nm and center spacing between 0 and 200 nm. Considering both the in-plane and out-of-plane stresses drastically transformed the contour plots from those when only in-plane stress was evaluated, clearly favoring small tipped, tightly packed nanopatterns. In addition, the effect of changes to radius and spacing in terms of the combined stress showed the best qualitative agreement with previous reported trends in killing efficiency. Together, the results affirm that the killing efficiency of a nanopattern can be maximized by simultaneous reduction in tip radius and increase in nanopattern packing ratio (i.e., radius/spacing). These findings provide a guide for the design of highly bactericidal nanopatterned surfaces.

| S-EPMC8540829 | biostudies-literature

Hexagonal organic nanopillar array from the melamine-cyanuric acid complex.

Project description:We report a well-defined, organic, hexagonal nanopillar array on a gold surface. The array was prepared from a cyanuric acid-melamine complex by means of sequential mixing on the gold surface. These nanopillars had uniform diameters of 200-400 nm and were 1 microm in length. They were well faceted with hexagonal cross sections. The nanopillars had a crystalline structure, and the pillars exhibited a layered texture in the longitudinal direction.

| S-EPMC2847679 | biostudies-literature

GaAs nanopillar-array solar cells employing in situ surface passivation.

Project description:Arrays of III-V direct-bandgap semiconductor nanopillars represent promising photovoltaic candidates due to their inherent high optical absorption coefficients and minimized reflection arising from light trapping, efficient charge collection in the radial direction and the ability to synthesize them on low-cost platforms. However, the increased surface area results in surface states that hamper the power conversion efficiency. Here, we report the first demonstration of GaAs nanopillar-array photovoltaics employing epitaxial passivation with air mass 1.5 global power conversion efficiencies of 6.63%. High-bandgap epitaxial InGaP shells are grown in situ and cap the radial p-n junctions to alleviate surface-state effects. Under light, the photovoltaic devices exhibit open-circuit voltages of 0.44?V, short-circuit current densities of 24.3?mA?cm(-2) and fill factors of 62% with high external quantum efficiencies >70% across the spectral regime of interest. A novel titanium/indium tin oxide annealed alloy is exploited as transparent ohmic anode.

| S-EPMC3586731 | biostudies-literature

Critical heat flux enhancement in pool boiling through increased rewetting on nanopillar array surfaces.

Project description:Boiling is a key heat transfer process for a variety of power generation and thermal management technologies. We show that nanopillar arrays fabricated on a substrate enhance both the critical heat flux (CHF) and the critical temperature at CHF of the substrate and thus, effectively increase the limit of boiling before the boiling crisis is triggered. We reveal that the enhancement in both the CHF and the critical temperature results from an intensified rewetting process which increases with the height of nanopillars. We develop a predictive model based on experimental measurements of rewetting velocity to predict the enhancement in CHF and critical temperature of the nanopillar substrates. This model is critical for understanding how to control boiling enhancement and designing various nanostructured surfaces into specific applications.

| S-EPMC5859279 | biostudies-literature

Does the aquatic invertebrate nipple array prevent bubble adhesion? An experiment using nanopillar sheets.

Project description:The nipple array is a submicrometre-scale structure found on the cuticle surfaces of various invertebrate taxa. Corneal nipples are an antiglare surface in nocturnal insects, but the functional significance of the nipple array has not been experimentally investigated for aquatic organisms. Using nanopillar sheets as a mimetic model of the nipple array, we demonstrated that significantly fewer bubbles adhered to the nanopillar surface versus a flat surface when the sheets were hydrophilic. Many more bubbles adhered to the hydrophobic surface than the hydrophilic surfaces. Bubbles on the body surface may cause buoyancy problems, movement interference and water flow occlusion. Here, bubble repellence is proposed as a function of the hydrophilic nipple array in aquatic invertebrates and its properties are considered based on bubble adhesion energy.

| S-EPMC3971699 | biostudies-literature

Ruler elements in chromatin remodelers set nucleosome array spacing and phasing.

Project description:Arrays of regularly spaced nucleosomes dominate chromatin and are often phased by alignment to reference sites like active promoters. How the distances between nucleosomes (spacing), and between phasing sites and nucleosomes are determined remains unclear, and specifically, how ATP-dependent chromatin remodelers impact these features. Here, we used genome-wide reconstitution to probe how Saccharomyces cerevisiae ATP-dependent remodelers generate phased arrays of regularly spaced nucleosomes. We find that remodelers bear a functional element named the 'ruler' that determines spacing and phasing in a remodeler-specific way. We use structure-based mutagenesis to identify and tune the ruler element residing in the Nhp10 and Arp8 modules of the INO80 remodeler complex. Generally, we propose that a remodeler ruler regulates nucleosome sliding direction bias in response to (epi)genetic information. This finally conceptualizes how remodeler-mediated nucleosome dynamics determine stable steady-state nucleosome positioning relative to other nucleosomes, DNA bound factors, DNA ends and DNA sequence elements.

| S-EPMC8163753 | biostudies-literature

Tunable Periodic Nanopillar Array for MAPbI<sub>3</sub> Perovskite Photodetectors with Improved Light Absorption.

Project description:In the field of optoelectronic applications, the vigorous development of organic-inorganic hybrid perovskite materials, such as methylammonium lead triiodide (MAPbI3), has spurred continuous research on methods to enhance the photodetection performance. Periodic nanoarrays can effectively improve the light absorption of perovskite thin films. However, there are still challenges in fabricating tunable periodic patterned and large-area perovskite nanoarrays. In this study, we present a cost-effective and facile approach utilizing nanosphere lithography and dry etching techniques to create a large-area Si nanopillar array, which is employed for patterning MAPbI3 thin films. The scanning electron microscopy (SEM) and X-ray diffraction (XRD) results reveal that the introduction of nanopillar structures did not have a significant adverse effect on the crystallinity of the MAPbI3 thin film. Light absorption tests and optical simulations indicate that the nanopillar array enhances the light intensity within the perovskite films, leading to photodetectors with a responsivity of 11.2 A/W and a detectivity of 7.3 × 1010 Jones at 450 nm in wavelength. Compared with photodetectors without nanostructures, these photodetectors exhibit better visible light absorption. Finally, we demonstrate the application of these photodetector arrays in a prototype image sensor.

| S-EPMC10795138 | biostudies-literature

Trap configuration and spacing influences parameter estimates in spatial capture-recapture models.

Project description:An increasing number of studies employ spatial capture-recapture models to estimate population size, but there has been limited research on how different spatial sampling designs and trap configurations influence parameter estimators. Spatial capture-recapture models provide an advantage over non-spatial models by explicitly accounting for heterogeneous detection probabilities among individuals that arise due to the spatial organization of individuals relative to sampling devices. We simulated black bear (Ursus americanus) populations and spatial capture-recapture data to evaluate the influence of trap configuration and trap spacing on estimates of population size and a spatial scale parameter, sigma, that relates to home range size. We varied detection probability and home range size, and considered three trap configurations common to large-mammal mark-recapture studies: regular spacing, clustered, and a temporal sequence of different cluster configurations (i.e., trap relocation). We explored trap spacing and number of traps per cluster by varying the number of traps. The clustered arrangement performed well when detection rates were low, and provides for easier field implementation than the sequential trap arrangement. However, performance differences between trap configurations diminished as home range size increased. Our simulations suggest it is important to consider trap spacing relative to home range sizes, with traps ideally spaced no more than twice the spatial scale parameter. While spatial capture-recapture models can accommodate different sampling designs and still estimate parameters with accuracy and precision, our simulations demonstrate that aspects of sampling design, namely trap configuration and spacing, must consider study area size, ranges of individual movement, and home range sizes in the study population.

| S-EPMC3914876 | biostudies-literature

Capture, isolation and release of cancer cells with aptamer-functionalized glass bead array.

Project description:Early detection and isolation of circulating tumor cells (CTC) can enable better prognosis for cancer patients. A Hele-Shaw device with aptamer functionalized glass beads is designed, modeled, and fabricated to efficiently isolate cancer cells from a cellular mixture. The glass beads are functionalized with anti-epidermal growth factor receptor (EGFR) aptamer and sit in ordered array of pits in polydimethylsiloxane (PDMS) channel. A PDMS encapsulation is then used to cover the channel and to flow through cell solution. The beads capture cancer cells from flowing solution depicting high selectivity. The cell-bound glass beads are then re-suspended from the device surface followed by the release of 92% cells from glass beads using combination of soft shaking and anti-sense RNA. This approach ensures that the cells remain in native state and undisturbed during capture, isolation and elution for post-analysis. The use of highly selective anti-EGFR aptamer with the glass beads in an array and subsequent release of cells with antisense molecules provide multiple levels of binding and release opportunities that can help in defining new classes of CTC enumeration devices.

| S-EPMC3498495 | biostudies-literature

Correction: Trap Configuration and Spacing Influences Parameter Estimates in Spatial Capture-Recapture Models.

Project description: Not available

| S-EPMC4619801 | biostudies-literature