Dataset Information

Direct growth of GaN layer on carbon nanotube-graphene hybrid structure and its application for light emitting diodes.

ABSTRACT: We report the growth of high-quality GaN layer on single-walled carbon nanotubes (SWCNTs) and graphene hybrid structure (CGH) as intermediate layer between GaN and sapphire substrate by metal-organic chemical vapor deposition (MOCVD) and fabrication of light emitting diodes (LEDs) using them. The SWCNTs on graphene act as nucleation seeds, resulting in the formation of kink bonds along SWCNTs with the basal plane of the substrate. In the x-ray diffraction, Raman and photoluminescence spectra, high crystalline quality of GaN layer grown on CGH/sapphire was observed due to the reduced threading dislocation and efficient relaxation of residual compressive strain caused by lateral overgrowth process. When applied to the LED structure, the current-voltage characteristics and electroluminescence (EL) performance exhibit that blue LEDs fabricated on CGH/sapphire well-operate at high injection currents and uniformly emit over the whole emission area. We expect that CGH can be applied for the epitaxial growth of GaN on various substrates such as Si and MgO, which can be a great advantage in electrical and thermal properties of optical devices fabricated on them.

SUBMITTER: Seo TH

PROVIDER: S-EPMC4297988 | biostudies-literature | 2015 Jan

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Direct growth of GaN layer on carbon nanotube-graphene hybrid structure and its application for light emitting diodes.

Seo Tae Hoon TH Park Ah Hyun AH Park Sungchan S Kim Yong Hwan YH Lee Gun Hee GH Kim Myung Jong MJ Jeong Mun Seok MS Lee Young Hee YH Hahn Yoon-Bong YB Suh Eun-Kyung EK

Scientific reports 20150119

We report the growth of high-quality GaN layer on single-walled carbon nanotubes (SWCNTs) and graphene hybrid structure (CGH) as intermediate layer between GaN and sapphire substrate by metal-organic chemical vapor deposition (MOCVD) and fabrication of light emitting diodes (LEDs) using them. The SWCNTs on graphene act as nucleation seeds, resulting in the formation of kink bonds along SWCNTs with the basal plane of the substrate. In the x-ray diffraction, Raman and photoluminescence spectra, hi ...[more]

PMID: 25597492

Similar Datasets

Project description:Light colors may affect poultry behaviors, well-being and performance. However, preferences of layer pullets for light colors are not fully understood. This study was conducted to investigate the pullet preferences for four light-emitting diode colors, including white, red, green and blue, in a lighting preference test system. The system contained four identical compartments each provided with a respective light color. The pullets were able to move freely between the adjacent compartments. A total of three groups of 20 Chinese domestic Jingfen layer pullets (54 to 82 days of age) were used for the test. Pullet behaviors were continuously recorded and summarized for each light color/compartment into daily time spent (DTS), daily percentage of time spent (DPTS), daily times of visit (DTV), duration per visit, daily feed intake (DFI), daily feeding time (DFT), feeding rate (FR), distribution of pullet occupancy and hourly time spent. The results showed that the DTS (h/pullet·per day) were 3.9±0.4 under white, 1.4±0.3 under red, 2.2±0.3 under green and 4.5±0.4 under blue light, respectively. The DTS corresponded to 11.7% to 37.6% DPTS in 12-h lighting periods. The DTV (times/pullet·per day) were 84±5 under white, 48±10 under red, 88±10 under green and 94±8 under blue light. Each visit lasted 1.5 to 3.2 min. The DFI (g/pullet·per day) were 27.6±1.7 under white, 7.1±1.6 under red, 15.1±1.1 under green and 23.1±2.0 under blue light. The DFT was 0.18 to 0.65 h/pullet·per day and the FR was 0.57 to 0.75 g/min. For most of the time during the lighting periods, six to 10 birds stayed under white, and one to five birds stayed under red, green and blue light. Pullets preferred to stay under blue light when the light was on and under white light 4 h before the light off. Overall, pullets preferred blue light the most and red light the least. These findings substantiate the preferences of layer pullets for light colors, providing insights for use in the management of light-emitting diode colors to meet pullet needs.

Dataset Information

Direct growth of GaN layer on carbon nanotube-graphene hybrid structure and its application for light emitting diodes.

Publications

Direct growth of GaN layer on carbon nanotube-graphene hybrid structure and its application for light emitting diodes.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets