Project description:Phonon polaritons are promising for infrared applications due to a strong light-matter coupling and subwavelength energy confinement they offer. Yet, the spectral narrowness of the phonon bands and difficulty to tune the phonon polariton properties hinder further progress in this field. SrTiO3 - a prototype perovskite oxide - has recently attracted attention due to two prominent far-infrared phonon polaritons bands, albeit without any tuning reported so far. Here we show, using cryogenic infrared near-field microscopy, that long-propagating surface phonon polaritons are present both in bare SrTiO3 and in LaAlO3/SrTiO3 heterostructures hosting a two-dimensional electron gas. The presence of the two-dimensional electron gas increases dramatically the thermal variation of the upper limit of the surface phonon polariton band due to temperature dependent polaronic screening of the surface charge carriers. Furthermore, we demonstrate a tunability of the upper surface phonon polariton frequency in LaAlO3/SrTiO3 via electrostatic gating. Our results suggest that oxide interfaces are a new platform bridging unconventional electronics and long-wavelength nanophotonics.

| S-EPMC10673882 | biostudies-literature

Atomic Clusters: Structure, Reactivity, Bonding, and Dynamics.

Project description:Atomic clusters lie somewhere in between isolated atoms and extended solids with distinctly different reactivity patterns. They are known to be useful as catalysts facilitating several reactions of industrial importance. Various machine learning based techniques have been adopted in generating their global minimum energy structures. Bond-stretch isomerism, aromatic stabilization, Rener-Teller effect, improved superhalogen/superalkali properties, and electride characteristics are some of the hallmarks of these clusters. Different all-metal and nonmetal clusters exhibit a variety of aromatic characteristics. Some of these clusters are dynamically stable as exemplified through their fluxional behavior. Several of these cluster cavitands are found to be agents for effective confinement. The confined media cause drastic changes in bonding, reactivity, and other properties, for example, bonding between two noble gas atoms, and remarkable acceleration in the rate of a chemical reaction under confinement. They have potential to be good hydrogen storage materials and also to activate small molecules for various purposes. Many atomic clusters show exceptional opto-electronic, magnetic, and nonlinear optical properties. In this Review article, we intend to highlight all these aspects.

| S-EPMC8415529 | biostudies-literature

Route to tunable room temperature electric polarization in SrTiO3-CoFe2O4 heterostructures.

Project description:Utilizing the magnetostrictive properties of CoFe2O4, we demonstrate reversible room temperature control of the Ti electronic structure in SrTiO3-CoFe2O4 heterostructures, by inducing local and reversible strain in the SrTiO3. By means of X-ray absorption spectroscopy, we have ascertained the changes that take place in the energy levels of the Ti 3d orbitals under the influence of an external magnetic field. The observed Ti electronic state when the sample is subjected to moderately large external magnetic fields and the disappearance of the induced phase upon their removal indicates lattice distortions that are suggestive of the development of a net electric polarization.

| S-EPMC8118119 | biostudies-literature

Atomic Resolution Interfacial Structure of Lead-free Ferroelectric K0.5Na0.5NbO3 Thin films Deposited on SrTiO3.

Project description:Oxide interface engineering has attracted considerable attention since the discovery of its exotic properties induced by lattice strain, dislocation and composition change at the interface. In this paper, the atomic resolution structure and composition of the interface between the lead-free piezoelectric (K0.5Na0.5)NbO3 (KNN) thin films and single-crystalline SrTiO3 substrate were investigated by means of scanning transmission electron microscopy (STEM) combining with electron energy loss spectroscopy (EELS). A sharp epitaxial interface was observed to be a monolayer composed of Nb and Ti cations with a ratio of 3/1. The First-Principles Calculations indicated the interface monolayer showed different electronic structure and played the vital role in the asymmetric charge distribution of KNN thin films near the interface. We also observed the gradual relaxation process for the relatively large lattice strains near the KNN/STO interface, which remarks a good structure modulation behavior of KNN thin films via strain engineering.

| S-EPMC5122904 | biostudies-literature

Nanotubes from the Misfit Layered Compound (SmS)1.19TaS2: Atomic Structure, Charge Transfer, and Electrical Properties.

Project description:Misfit layered compounds (MLCs) MX-TX2, where M, T = metal atoms and X = S, Se, or Te, and their nanotubes are of significant interest due to their rich chemistry and unique quasi-1D structure. In particular, LnX-TX2 (Ln = rare-earth atom) constitute a relatively large family of MLCs, from which nanotubes have been synthesized. The properties of MLCs can be tuned by the chemical and structural interplay between LnX and TX2 sublayers and alloying of each of the Ln, T, and X elements. In order to engineer them to gain desirable performance, a detailed understanding of their complex structure is indispensable. MLC nanotubes are a relative newcomer and offer new opportunities. In particular, like WS2 nanotubes before, the confinement of the free carriers in these quasi-1D nanostructures and their chiral nature offer intriguing physical behavior. High-resolution transmission electron microscopy in conjunction with a focused ion beam are engaged to study SmS-TaS2 nanotubes and their cross-sections at the atomic scale. The atomic resolution images distinctly reveal that Ta is in trigonal prismatic coordination with S atoms in a hexagonal structure. Furthermore, the position of the sulfur atoms in both the SmS and the TaS2 sublattices is revealed. X-ray photoelectron spectroscopy, electron energy loss spectroscopy, and X-ray absorption spectroscopy are carried out. These analyses conclude that charge transfer from the Sm to the Ta atoms leads to filling of the Ta 5d z 2 level, which is confirmed by density functional theory (DFT) calculations. Transport measurements show that the nanotubes are semimetallic with resistivities in the range of 10-4 Ω·cm at room temperature, and magnetic susceptibility measurements show a superconducting transition at 4 K.

| S-EPMC8874355 | biostudies-literature

A dataset of the thioacetmide supported formation of ZrO2 coating on Ni-rich layered structure cathode materials in lithium-ion batteries.

Project description:A dataset in this report is regarding a research article "Crucial Role of Thioacetamide for ZrO2 Coating on the Fragile Surface of Ni-rich Layered Cathode in Lithium Ion Batteries" [1]. Thioacetamide (TA) is introduced to form a homogeneous ZrO2-coating in a facile method through washing with Zr(SO4)2 aqueous solution. The presence of the data in this paper indicated the role of TA for surface modification of LiNi0.82Co0.09Mn0.09O2 (NCM82) materials by ZrO2, leading to improve the electrochemical performance of NCM82 Ni-rich cathode materials. These data were proceeded measurement electrochemical properties of cathode electrode on a battery cycler, the surface characteristics of the cathode materials were investigated by SEM, EDS mapping, TEM and XPS. X-ray diffraction (XRD, Rigaku, SmartLab) was used to evaluate the influence of the coating layer on the microstructure of active materials.

| S-EPMC7163330 | biostudies-literature

Three-dimensional atomic insights into the metal-oxide interface in Zr-ZrO2 nanoparticles.

Project description:Metal-oxide interfaces with poor coherency have specific properties comparing to bulk materials and offer broad applications in heterogeneous catalysis, battery, and electronics. However, current understanding of the three-dimensional (3D) atomic metal-oxide interfaces remains limited because of their inherent structural complexity and the limitations of conventional two-dimensional imaging techniques. Here, we determine the 3D atomic structure of metal-oxide interfaces in zirconium-zirconia nanoparticles using atomic-resolution electron tomography. We quantitatively analyze the atomic concentration and the degree of oxidation, and find the coherency and translational symmetry of the interfaces are broken. Atoms at the interface have low structural ordering, low coordination, and elongated bond length. Moreover, we observe porous structures such as Zr vacancies and nano-pores, and investigate their distribution. Our findings provide a clear 3D atomic picture of metal-oxide interface with direct experimental evidence. We anticipate this work could encourage future studies on fundamental problems of oxides, such as interfacial structures in semiconductor and atomic motion during oxidation process.

| S-EPMC11369257 | biostudies-literature

Dimensional transformation of chemical bonding during crystallization in a layered chalcogenide material.

Project description:Two-dimensional (2D) van der Waals (vdW) materials possess a crystal structure in which a covalently-bonded few atomic-layer motif forms a single unit with individual motifs being weakly bound to each other by vdW forces. Cr2Ge2Te6 is known as a 2D vdW ferromagnetic insulator as well as a potential phase change material for non-volatile memory applications. Here, we provide evidence for a dimensional transformation in the chemical bonding from a randomly bonded three-dimensional (3D) disordered amorphous phase to a 2D bonded vdW crystalline phase. A counterintuitive metastable "quasi-layered" state during crystallization that exhibits both "long-range order and short-range disorder" with respect to atomic alignment clearly distinguishes the system from conventional materials. This unusual behavior is thought to originate from the 2D nature of the crystalline phase. These observations provide insight into the crystallization mechanism of layered materials in general, and consequently, will be useful for the realization of 2D vdW material-based functional nanoelectronic device applications.

| S-EPMC7940477 | biostudies-literature

Nonzero Berry phase in quantum oscillations from giant Rashba-type spin splitting in LaTiO3/SrTiO3 heterostructures.

Project description:The manipulation of the spin degrees of freedom in a solid has been of fundamental and technological interest recently for developing high-speed, low-power computational devices. There has been much work focused on developing highly spin-polarized materials and understanding their behavior when incorporated into so-called spintronic devices. These devices usually require spin splitting with magnetic fields. However, there is another promising strategy to achieve spin splitting using spatial symmetry breaking without the use of a magnetic field, known as Rashba-type splitting. Here we report evidence for a giant Rashba-type splitting at the interface of LaTiO3 and SrTiO3. Analysis of the magnetotransport reveals anisotropic magnetoresistance, weak anti-localization and quantum oscillation behavior consistent with a large Rashba-type splitting. It is surprising to find a large Rashba-type splitting in 3d transition metal oxide-based systems such as the LaTiO3/SrTiO3 interface, but it is promising for the development of a new kind of oxide-based spintronics.

| S-EPMC5899139 | biostudies-literature