Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

A compact photometer based on metal-waveguide-capillary: application to detecting glucose of nanomolar concentration.

ABSTRACT: Trace analysis of liquid samples has wide applications in life science and environmental monitor. In this paper, a compact and low-cost photometer based on metal-waveguide-capillary (MWC) was developed for ultra-sensitive absorbance detection. The optical-path can be greatly enhanced and much longer than the physical length of MWC, because the light scattered by the rippled and smooth metal sidewall can be confined inside the capillary regardless of the incident-angle. For the photometer with a 7 cm long MWC, the detection limit is improved ~3000 fold compared with that of commercial spectrophotometer with 1 cm-cuvette, owing to the novel nonlinear optical-path enhancement as well as fast sample switching, and detecting glucose of a concentration as low as 5.12 nM was realized with conventional chromogenic reagent.

SUBMITTER: Bai M

PROVIDER: S-EPMC4447070 | biostudies-literature | 2015 May

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

A compact photometer based on metal-waveguide-capillary: application to detecting glucose of nanomolar concentration.

Bai Min M Huang Hui H Hao Jian J Zhang Ji J Wu Haibo H Qu Bo B

Scientific reports 20150528

Trace analysis of liquid samples has wide applications in life science and environmental monitor. In this paper, a compact and low-cost photometer based on metal-waveguide-capillary (MWC) was developed for ultra-sensitive absorbance detection. The optical-path can be greatly enhanced and much longer than the physical length of MWC, because the light scattered by the rippled and smooth metal sidewall can be confined inside the capillary regardless of the incident-angle. For the photometer with a ...[more]

PMID: 26020222

Similar Datasets

Inverse design of compact silicon photonic waveguide reflectors and their application for Fabry-Perot resonators.

Project description:Silicon photonic waveguide resonators, such as microring resonators, photonic crystal waveguide cavities, and Fabry-Perot resonators based on the distributed Bragg reflectors, are key device components for silicon-based photonic integrated circuits (Si-PIC). For the Si-PIC with high integration density, the device footprints of the conventional photonic waveguide resonators need to be more compact. Inverse design, which is operated by the design expectation and different from the conventional design methods, has been investigated for reducing the photonic device components nowadays. In this paper, we inversely designed the silicon photonic waveguide reflectors for two target wavelengths: one is 1310 nm and the other is 1550 nm. The silicon photonic waveguide reflectors have reflectance of 0.99993 and 0.9955 for the wavelength of 1310 nm and 1550 nm each with 5-μm-long reflectors. Also, we theoretically investigated Fabry-Perot resonators based on the inversely designed photonic waveguide reflectors. Q factors of the Fabry-Perot resonators have been calculated to be 1.3 × 105 for the wavelength of 1310 nm and 2583 for the wavelength of 1550 nm. We have expected that the inversely designed photonic waveguide reflectors and their applications for the Fabry-Perot resonators can be utilized for compact passive/active device components such as wavelength filters, modulators, and external cavity lasers.

| S-EPMC11501554 | biostudies-literature

Towards higher frequencies in a compact prebunched waveguide THz-FEL.

Project description:Free-electron-lasers fill a critical gap in the space of THz-sources as they can reach high average and peak powers with spectral tunability. Using a waveguide in a THz FEL significantly increases the coupling between the relativistic electrons and electromagnetic field enabling large amounts of radiation to be generated in a single passage of electrons through the undulator. In addition to transversely confining the radiation, the dispersive properties of the waveguide critically affect the velocity and slippage of the radiation pulse which determine the central frequency and bandwidth of the generated radiation. In this paper, we characterize the spectral properties of a compact waveguide THz FEL including simultaneous lasing at two different frequencies and demonstrating tuning of the radiation wavelength in the high frequency branch by varying the beam energy and ensuring that the electrons injected into the undulator are prebunched on the scale of the resonant radiation wavelength.

| S-EPMC11365952 | biostudies-literature

A novel fluorescent sensor protein for detecting changes in airway surface liquid glucose concentration.

Project description:Both lung disease and elevation of blood glucose are associated with increased glucose concentration (from 0.4 to ~4.0 mM) in the airway surface liquid (ASL). This perturbation of ASL glucose makes the airway more susceptible to infection by respiratory pathogens. ASL is minute (~1 μl/cm(2)) and the measurement of glucose concentration in the small volume ASL is extremely difficult. Therefore, we sought to develop a fluorescent biosensor with sufficient sensitivity to determine glucose concentrations in ASL in situ. We coupled a range of environmentally sensitive fluorophores to mutated forms of a glucose/galactose-binding protein (GBP) including H152C and H152C/A213R and determined their equilibrium binding properties. Of these, GBP H152C/A213R-BADAN (Kd 0.86 ± 0.01 mM, Fmax/F0 3.6) was optimal for glucose sensing and in ASL increased fluorescence when basolateral glucose concentration was raised from 1 to 20 mM. Moreover, interpolation of the data showed that the glucose concentration in ASL was increased, with results similar to that using glucose oxidase analysis. The fluorescence of GBP H152C/A213R-BADAN in native ASL from human airway epithelial cultures in situ was significantly increased over time when basolateral glucose was increased from 5 to 20 mM. Overall our data indicate that this GBP is a useful tool to monitor glucose homoeostasis in the lung.

| S-EPMC4357280 | biostudies-literature

Liquid seal for compact micropiston actuation at the capillary tip.

Project description:Actuators at the tip of a submillimetric catheter could facilitate in vivo interventional procedures at cellular scales by enabling tissue biopsy and manipulation or supporting active micro-optics. However, the dominance of frictional forces at this scale makes classical mechanism problematic. Here, we report the design of a microscale piston, with a maximum dimension of 150 μm, fabricated with two-photon lithography onto the tip of 140-μm-diameter capillaries. An oil drop method is used to create a seal between the piston and the cylinder that prevents any leakage below 185-mbar pressure difference while providing lubricated friction between moving parts. This piston generates forces that increase linearly with pressure up to 130 μN without breaking the liquid seal. The practical value of the design is demonstrated with its integration with a microgripper that can grasp, move, and release 50-μm microspheres. Such a mechanism opens the way to micrometer-size catheter actuation.

| S-EPMC7253165 | biostudies-literature

Waveguide-Integrated Light-Emitting Metal-Insulator-Graphene Tunnel Junctions.

Project description:Ultrafast interfacing of electrical and optical signals at the nanoscale is highly desired for on-chip applications including optical interconnects and data processing devices. Here, we report electrically driven nanoscale optical sources based on metal-insulator-graphene tunnel junctions (MIG-TJs), featuring waveguided output with broadband spectral characteristics. Electrically driven inelastic tunneling in a MIG-TJ, realized by integrating a silver nanowire with graphene, provides broadband excitation of plasmonic modes in the junction with propagation lengths of several micrometers (∼10 times larger than that for metal-insulator-metal junctions), which therefore propagate toward the junction edge with low loss and couple to the nanowire waveguide with an efficiency of ∼70% (∼1000 times higher than that for metal-insulator-metal junctions). Alternatively, lateral coupling of the MIG-TJ to a semiconductor nanowire provides a platform for efficient outcoupling of electrically driven plasmonic signals to low-loss photonic waveguides, showing potential for applications at various integration levels.

| S-EPMC10176563 | biostudies-literature

Heterogeneously integrated light emitting diodes and photodetectors in the metal-insulator-metal waveguide platform.

Project description:We demonstrate heterogeneous integration of active semiconductor materials into the conventional passive metal-insulator-metal (MIM) waveguides to provide compact on-chip light generation and detection capabilities for chip-scale active nanophotonic platforms. Depending on its bias conditions, a metal-semiconductor-metal section can function as either a light emitting diode or a photodetector directly connected to the MIM waveguides. We experimentally verify the independent and combined operations of electrically-driven on-chip light sources and photodetectors.

| S-EPMC11501676 | biostudies-literature

Waveguide-coupled nanopillar metal-cavity light-emitting diodes on silicon.

Project description:Nanoscale light sources using metal cavities have been proposed to enable high integration density, efficient operation at low energy per bit and ultra-fast modulation, which would make them attractive for future low-power optical interconnects. For this application, such devices are required to be efficient, waveguide-coupled and integrated on a silicon substrate. We demonstrate a metal-cavity light-emitting diode coupled to a waveguide on silicon. The cavity consists of a metal-coated III-V semiconductor nanopillar which funnels a large fraction of spontaneous emission into the fundamental mode of an InP waveguide bonded to a silicon wafer showing full compatibility with membrane-on-Si photonic integration platforms. The device was characterized through a grating coupler and shows on-chip external quantum efficiency in the 10-4-10-2 range at tens of microamp current injection levels, which greatly exceeds the performance of any waveguide-coupled nanoscale light source integrated on silicon in this current range. Furthermore, direct modulation experiments reveal sub-nanosecond electro-optical response with the potential for multi gigabit per second modulation speeds.

| S-EPMC5296653 | biostudies-literature

Nanomolar Caffeic Acid Decreases Glucose Uptake and the Effects of High Glucose in Endothelial Cells.

Project description:Epidemiological studies suggest that moderate and prolonged consumption of coffee is associated with a reduced risk of developing type 2 diabetes but the molecular mechanisms underlying this effect are not known. In this study, we report the effects of physiological concentrations of caffeic acid, easily achievable by normal dietary habits, in endothelial cells cultured in 25 mM of glucose (high glucose, HG). In HG, the presence of 10 nM caffeic acid was associated with a decrease of glucose uptake but not to changes of GLUT-1 membrane localization or mRNA levels. Moreover, caffeic acid countered HG-induced loss of barrier integrity, reducing actin rearrangement and FITC-dextran passage. The decreased flux of glucose associated to caffeic acid affected HG induced apoptosis by down-regulating the expression of initiator (caspase 8 and 9) and effector caspases (caspase 7 and 3) and by increasing the levels of phosphorylated Bcl-2. We also observed that caffeic acid in HG condition was associated to a reduction of p65 subunit nuclear levels with respect to HG alone. NF-κB activation has been shown to lead to apoptosis in HG treated cells and the analysis of the expression of a panel of about 90 genes related to NF-κB signaling pathway revealed that caffeic acid significantly influenced gene expression changes induced by HG. In conclusion, our results suggest that caffeic acid, decreasing the metabolic stress induced by HG, allows the activation of survival mechanisms mediated by a different modulation of NF-κB-related signaling pathways and to the activation of anti-apoptotic proteins.

| S-EPMC4636304 | biostudies-literature

Fluorescent hydrogel waveguide for on-site detection of heavy metal ions.

Project description:Hydrogels have great applications in tissue engineering and drug delivery. Recently, there have been intense interests in developments and applications of nanocomposite hydrogels by incorporating nanomaterials into polymer matrix, which endows the hydrogels with new functionalities. Here, we report on the first carbon dots (CDs) doped hydrogel waveguide for selective, on-site detection of heavy metal ions in aqueous solutions. The CDs-doped hydrogel waveguide exhibits efficient light confinement in water due to the refractive index contrast. The smooth waveguide surfaces lead to low light scattering loss. Real-time spectra measurement of the CDs-doped hydrogel waveguide with a compact interrogation setup demonstrates that the novel design can be used as a portable, robust sensing platform for on-site analysis and assessment of heavy metal ions.

| S-EPMC5554134 | biostudies-literature

Complete power concentration into a single waveguide in large-scale waveguide array lenses.

Project description:Waveguide array lenses are waveguide arrays that focus light incident on all waveguides at the input side into a small number of waveguides at the output side. Ideal waveguide array lenses provide complete (100%) power concentration of incident light into a single waveguide. While of great interest for several applications, ideal waveguide array lenses have not been demonstrated for practical arrays with large numbers of waveguides. The only waveguide arrays that have sufficient degrees of freedom to allow for the design of an ideal waveguide array lens are those where both the propagation constants of the individual waveguides and the coupling constants between the waveguides vary as a function of space. Here, we use state-of-the-art numerical methods to demonstrate complete power transfer into a single waveguide for waveguide array lenses with large numbers of waveguides. We verify this capability for more than a thousand waveguides using a spatial coupled mode theory. We hereby extend the state-of-art by more than two orders of magnitude. We also demonstrate for the first time a physical design for an ideal waveguide array lens. The design is based on an aperiodic metallic waveguide array and focuses ~100% of the incident light into a deep-subwavelength focal spot.

| S-EPMC4198864 | biostudies-other

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data