Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

A near-wearless and extremely long lifetime amorphous carbon film under high vacuum.

ABSTRACT: Prolonging wear life of amorphous carbon films under vacuum was an enormous challenge. In this work, we firstly reported that amorphous carbon film as a lubricant layer containing hydrogen, oxygen, fluorine and silicon (a-C:H:O:F:Si) exhibited low friction (~0.1), ultra-low wear rate (9.0 × 10(-13) mm(3) N(-1) mm(-1)) and ultra-long wear life (>2 × 10(6) cycles) under high vacuum. We systematically examined microstructure and composition of transfer film for understanding of the underlying frictional mechanism, which suggested that the extraordinarily excellent tribological properties were attributed to the thermodynamically and structurally stable FeF2 nanocrystallites corroborated using first-principles calculations, which were induced by the tribochemical reaction.

SUBMITTER: Wang L

PROVIDER: S-EPMC4461914 | biostudies-literature | 2015 Jun

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

A near-wearless and extremely long lifetime amorphous carbon film under high vacuum.

Wang Liping L Zhang Renhui R Jansson Ulf U Nedfors Nils N

Scientific reports 20150610

Prolonging wear life of amorphous carbon films under vacuum was an enormous challenge. In this work, we firstly reported that amorphous carbon film as a lubricant layer containing hydrogen, oxygen, fluorine and silicon (a-C:H:O:F:Si) exhibited low friction (~0.1), ultra-low wear rate (9.0 × 10(-13) mm(3) N(-1) mm(-1)) and ultra-long wear life (>2 × 10(6) cycles) under high vacuum. We systematically examined microstructure and composition of transfer film for understanding of the underlying frict ...[more]

PMID: 26059254

Similar Datasets

Superlubricity of Silicon-Based Ceramics Sliding against Hydrogenated Amorphous Carbon in Ultrahigh Vacuum: Mechanisms of Transfer Film Formation.

Project description:Tribological interfaces between silicon-based ceramics, such as Si3N4 or SiC, are characterized by high friction and wear in unlubricated conditions. A solution to this problem is to use them in combination with a hydrogenated amorphous carbon (a-C:H) countersurface from which a passivating carbon film is transferred onto the ceramic surface. However, the mechanisms underlying a stable film transfer process and the conditions that favor it remain elusive. Here, we present friction experiments in ultrahigh vacuum in which friction coefficients lower than 0.01 are achieved by sliding Si3N4 against a-C:H with 36 at. % hydrogen but not against a-C:H with 20 at. % hydrogen. Chemical surface analyses confirm that the superlubric interface forms via the transfer of a hydrocarbon nanofilm onto the Si3N4 surface. Quantum-mechanical simulations reveal that a stable passivating a-C:H film can only be transferred if, after initial cold welding of the tribological interface, the plastic shear deformation is localized within the a-C:H coating. This occurs if the yield shear stress for plastic flow of a-C:H is lower than that of the ceramic and of the shear strength of the a-C:H-ceramic interface, i.e., if the a-C:H hydrogen content ranges between ∼30 and ∼50 at. %. While the importance of a relatively high hydrogen content to achieve an efficient passivation of a-C:H surfaces in a vacuum is well-documented, this work reveals how the hydrogen content is also crucial for obtaining a stable a-C:H transfer film. These results can be extended to glass, SiC, and steel, supporting the generality of the proposed mechanism.

| S-EPMC10876050 | biostudies-literature

Nanoporous Amorphous Carbon Monolayer Derived from Fullerene Film.

Project description:Carbon materials derived from fullerene are reported recently with unique structures and properties. However, only micrometer size samples can be obtained that limits the studying and exploration for membrane applications. Here, the preparation of a centimeter-size nanoporous amorphous carbon monolayer is reported by rapid pyrolyzing a Langmuir-Blodgett film of fullerene. The sample is fully characterized and the results indicate that the amorphous carbon monolayer derived from fullerene is metastable and insulating. The ionic transmembrane transport study demonstrates that the membrane is porous and cation selective with a selectivity of 26%. This work provides new insights into the controlled synthesis of large-size metastable amorphous carbon monolayer.

| S-EPMC10933613 | biostudies-literature

Behavioral data of thin-film single junction amorphous silicon (a-Si) photovoltaic modules under outdoor long term exposure.

Project description:Four years׳ behavioral data of thin-film single junction amorphous silicon (a-Si) photovoltaic (PV) modules installed in a relatively dry and sunny inland site with a Continental-Mediterranean climate (in the city of Jaén, Spain) are presented in this article. The shared data contributes to clarify how the Light Induced Degradation (LID) impacts the output power generated by the PV array, especially in the first days of exposure under outdoor conditions. Furthermore, a valuable methodology is provided in this data article permitting the assessment of the degradation rate and the stabilization period of the PV modules. Further discussions and interpretations concerning the data shared in this article can be found in the research paper "Characterization of degradation and evaluation of model parameters of amorphous silicon photovoltaic modules under outdoor long term exposure" (Kichou et al., 2016) [1].

| S-EPMC4781922 | biostudies-literature

Human apo ferritin frozen on TEM grid with amorphous carbon supporting film

Project description: Not available

| EMPIAR-10405 | biostudies-other

A squeezed light source operated under high vacuum.

Project description:Non-classical squeezed states of light are becoming increasingly important to a range of metrology and other quantum optics applications in cryptography, quantum computation and biophysics. Applications such as improving the sensitivity of advanced gravitational wave detectors and the development of space-based metrology and quantum networks will require robust deployable vacuum-compatible sources. To date non-linear photonics devices operated under high vacuum have been simple single pass systems, testing harmonic generation and the production of classically correlated photon pairs for space-based applications. Here we demonstrate the production under high-vacuum conditions of non-classical squeezed light with an observed 8.6 dB of quantum noise reduction down to 10 Hz. Demonstration of a resonant non-linear optical device, for the generation of squeezed light under vacuum, paves the way to fully exploit the advantages of in-vacuum operations, adapting this technology for deployment into new extreme environments.

| S-EPMC4677301 | biostudies-other

Nanoporous Amorphous Carbon with Exceptional Ultra-High Strength.

Project description:Nanoporous materials show a promising combination of mechanical properties in terms of their relative density; while there are numerous studies based on metallic nanoporous materials, here we focus on amorphous carbon with a bicontinuous nanoporous structure as an alternative to control the mechanical properties for the function of filament composition.Using atomistic simulations, we study the mechanical response of nanoporous amorphous carbon with 50% porosity, with sp3 content ranging from 10% to 50%. Our results show an unusually high strength between 10 and 20 GPa as a function of the %sp3 content. We present an analytical analysis derived from the Gibson-Ashby model for porous solids, and from the He and Thorpe theory for covalent solids to describe Young's modulus and yield strength scaling laws extremely well, revealing also that the high strength is mainly due to the presence of sp3 bonding. Alternatively, we also find two distinct fracture modes: for low %sp3 samples, we observe a ductile-type behavior, while high %sp3 leads to brittle-type behavior due to high high shear strain clusters driving the carbon bond breaking that finally promotes the filament fracture. All in all, nanoporous amorphous carbon with bicontinuous structure is presented as a lightweight material with a tunable elasto-plastic response in terms of porosity and sp3 bonding, resulting in a material with a broad range of possible combinations of mechanical properties.

| S-EPMC10142945 | biostudies-literature

Large-deformation and high-strength amorphous porous carbon nanospheres.

Project description:Carbon is one of the most important materials extensively used in industry and our daily life. Crystalline carbon materials such as carbon nanotubes and graphene possess ultrahigh strength and toughness. In contrast, amorphous carbon is known to be very brittle and can sustain little compressive deformation. Inspired by biological shells and honeycomb-like cellular structures in nature, we introduce a class of hybrid structural designs and demonstrate that amorphous porous carbon nanospheres with a thin outer shell can simultaneously achieve high strength and sustain large deformation. The amorphous carbon nanospheres were synthesized via a low-cost, scalable and structure-controllable ultrasonic spray pyrolysis approach using energetic carbon precursors. In situ compression experiments on individual nanospheres show that the amorphous carbon nanospheres with an optimized structure can sustain beyond 50% compressive strain. Both experiments and finite element analyses reveal that the buckling deformation of the outer spherical shell dominates the improvement of strength while the collapse of inner nanoscale pores driven by twisting, rotation, buckling and bending of pore walls contributes to the large deformation.

| S-EPMC4829827 | biostudies-literature

Probing the intrinsic failure mechanism of fluorinated amorphous carbon film based on the first-principles calculations.

Project description:Fluorinated amorphous carbon films exhibit superlow friction under vacuum, but are prone to catastrophic failure. Thus far, the intrinsic failure mechanism remains unclear. A prevailing view is that the failure of amorphous carbon film results from the plastic deformation of substrates or strong adhesion between two contacted surfaces. In this paper, using first-principles and molecular dynamics methodology, combining with compressive stress-strain relation, we firstly demonstrate that the plastic deformation induces graphitization resulting in strong adhesion between two contacted surfaces under vacuum, which directly corresponds to the cause of the failure of the films. In addition, sliding contact experiments are conducted to study tribological properties of iron and fluorinated amorphous carbon surfaces under vacuum. The results show that the failure of the film is directly attributed to strong adhesion resulting from high degree of graphitization of the film, which are consistent with the calculated results.

| S-EPMC4371838 | biostudies-literature

High-permeability vacuum membrane distillation utilizing mechanically compressed carbon nanotube membranes.

Project description:Membranes for membrane distillation (MD) are mostly made of polymeric and ceramic materials. We demonstrate here that the laterally-compressed, vertically-aligned CNTs (VACNT) obtainable from a CNT forest are an excellent membrane material for vacuum membrane distillation (VMD). The VACNT structure provides interstices between CNTs for extracting vaporized water molecules, while efficiently filtering the impurity salts. The VACNT membrane is shown to deliver excellent performance when tested for the desalination of 3.5 wt% NaCl water solution, as exemplified by the permeability of 68 LMH (liter per square meter per hour) achieved at the salt rejection of over 99.8% at 65 °C. We also demonstrate that the VACNT membrane performance can be maintained with time with the aid of a simple cleaning procedure, which bodes well for a long lifetime of the membrane for VMD application.

| S-EPMC8978618 | biostudies-literature

High Mobility Thin Film Transistors Based on Amorphous Indium Zinc Tin Oxide.

Project description:Top-contact bottom-gate thin film transistors (TFTs) with zinc-rich indium zinc tin oxide (IZTO) active layer were prepared at room temperature by radio frequency magnetron sputtering. Sintered ceramic target was prepared and used for deposition from oxide powder mixture having the molar ratio of In2O3:ZnO:SnO2 = 2:5:1. Annealing treatment was carried out for as-deposited films at various temperatures to investigate its effect on TFT performances. It was found that annealing treatment at 350 °C for 30 min in air atmosphere yielded the best result, with the high field effect mobility value of 34 cm2/Vs and the minimum subthreshold swing value of 0.12 V/dec. All IZTO thin films were amorphous, even after annealing treatment of up to 350 °C.

| S-EPMC5551745 | biostudies-other

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data