Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Novel nano bearings constructed by physical adsorption.

ABSTRACT: The paper proposes a novel nano bearing formed by the physical adsorption of the confined fluid to the solid wall. The bearing is formed between two parallel smooth solid plane walls sliding against one another, where conventional hydrodynamic lubrication theory predicted no lubricating effect. In this bearing, the stationary solid wall is divided into two subzones which respectively have different interaction strengths with the lubricating fluid. It leads to different physical adsorption and slip properties of the lubricating fluid at the stationary solid wall respectively in these two subzones. It was found that a significant load-carrying capacity of the bearing can be generated for low lubricating film thicknesses, because of the strong physical adsorption and non-continuum effects of the lubricating film.

SUBMITTER: Zhang Y

PROVIDER: S-EPMC4585955 | biostudies-literature | 2015 Sep

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Novel nano bearings constructed by physical adsorption.

Zhang Yongbin Y

Scientific reports 20150928

The paper proposes a novel nano bearing formed by the physical adsorption of the confined fluid to the solid wall. The bearing is formed between two parallel smooth solid plane walls sliding against one another, where conventional hydrodynamic lubrication theory predicted no lubricating effect. In this bearing, the stationary solid wall is divided into two subzones which respectively have different interaction strengths with the lubricating fluid. It leads to different physical adsorption and sl ...[more]

PMID: 26412488

Similar Datasets

A semiconductor-electrocatalyst nano interface constructed for successive photoelectrochemical water oxidation.

Project description:Photoelectrochemical water splitting has long been considered an ideal approach to producing green hydrogen by utilizing solar energy. However, the limited photocurrents and large overpotentials of the anodes seriously impede large-scale application of this technology. Here, we use an interfacial engineering strategy to construct a nanostructural photoelectrochemical catalyst by incorporating a semiconductor CdS/CdSe-MoS2 and NiFe layered double hydroxide for the oxygen evolution reaction. Impressively, the as-prepared photoelectrode requires an low potential of 1.001 V vs. reversible hydrogen electrode for a photocurrent density of 10 mA cm-2, and this is 228 mV lower than the theoretical water splitting potential (1.229 vs. reversible hydrogen electrode). Additionally, the generated current density (15 mA cm-2) of the photoelectrode at a given overpotential of 0.2 V remains at 95% after long-term testing (100 h). Operando X-ray absorption spectroscopy revealed that the formation of highly oxidized Ni species under illumination provides large photocurrent gains. This finding opens an avenue for designing high-efficiency photoelectrochemical catalysts for successive water splitting.

| S-EPMC10160110 | biostudies-literature

A novel design of journal bearings for stability under shock loads.

Project description:Mechanical systems are expected to operate under various load conditions, and it is necessary to use a lubrication system to achieve reliability and stable performance. Journal bearings, which are used to achieve such stable lubrication, are representative of hydrodynamic lubrication bearings. In this study, groove-shaped structures and rubber were applied to the ends of the bearings to ensure stable lubrication performance under conditions where, for various reasons, shock loads are applied in addition to static loads under misaligned conditions. The groove structure and rubber contribute to stable lubrication performance by preventing contact between the shaft and bearing as well as absorbing shock loads through elastic deformation of the groove's end due to oil film pressure. This novel design, which utilizes groove-type flexible structures and rubber, led to journal bearings that exhibited improved lubrication performance under various shock load conditions. When a shock load is applied to a mechanical system, the design proposed in this study contributes to improving the reliability of the mechanical system by enhancing its lubrication performance.

| S-EPMC11439946 | biostudies-literature

A quasi-cyclic RNA nano-scale molecular object constructed using kink turns.

Project description:k-Turns are widespread RNA architectural elements that mediate tertiary interactions. We describe a double-kink-turn motif comprising two inverted k-turns that forms a tight horse-shoe structure that can assemble into a variety of shapes by coaxial association of helical ends. Using X-ray crystallography we show that these assemble with two (dumbell), three (triangle) and four units (square), with or without bound protein, within the crystal lattice. In addition, exchange of a single basepair can almost double the pore radius or shape of a molecular assembly. On the basis of this analysis we synthesized a 114 nt self-complementary RNA containing six k-turns. The crystal structure of this species shows that it forms a quasi-cyclic triangular object. These are randomly disposed about the three-fold axis in the crystal lattice, generating a circular RNA of quasi D3 symmetry with a shape reminiscent of that of a cyclohexane molecule in its chair conformation. This work demonstrates that the k-turn is a powerful building block in the construction of nano-scale molecular objects, and illustrates why k-turns are widely used in natural RNA molecules to organize long-range architecture and mediate tertiary contacts.

| S-EPMC5058347 | biostudies-literature

DNA Origami-Constructed Nanotapes for Sunitinib Adsorption and Inhibition of Renal Clear Carcinoma Cells.

Project description:Sunitinib (SUN) is a first-line drug for the treatment of renal clear carcinoma cells by targeting receptor tyrosine kinases (RTK) on the cell membrane. However, the effective delivery of SUN to the cell membrane remains a significant challenge. In this study, we fabricated precisely structured DNA nanotapes with strong surface SUN adhesion, enabling RTK inhibition of renal clear carcinoma cells. In our design, the precisely assembled linear topological six-helical-bundle DNA origami serves as the framework, and positively charged chitosan is adsorbed onto the DNA origami surface, thereby forming DNA nanotapes. The SUN was efficiently loaded onto the surface of the DNA nanotapes by electrostatic interaction. We found that DNA nanotapes exhibit excellent stability in serum. Importantly, DNA nanotapes carrying SUN can achieve prolonged cell membrane retention and inhibit RTK, thereby enhancing cytotoxicity toward 786-0 cells. Taken together, this study provides a promising candidate platform for the efficient delivery of cell membrane receptor inhibitors in anticancer therapy.

| S-EPMC11307990 | biostudies-literature

Adsorption-desorption nano-aptasensors: fluorescent screening assays for ochratoxin A.

Project description:In this study, a FRET-based fluorescent aptasensor for the detection of ochratoxin A (OTA) was optimized based on the quenching efficiency of single-walled carbon nanotubes (SWCNTs) and the binding affinity of aptamers. OTA aptamers were conjugated with quantum dots and adsorbed to the surface of both acid-modified and unmodified SWCNTs. The maximum fluorescence quenching efficiency of the SWCNTs were compared. Acid-modified SWCNTs (amSWCNTs) have moderate quenching efficiency, providing an optimal sensitivity for qualitative fluorescence-enhancement biosensor assays. The binding parameters of the QD-modified OTA aptamers (1.12.2 and A08min) on the surface of amSWCNTs were compared. Based on our results, the A08min aptamer is a better candidate for OTA detection. Using the A08min aptamer, the SWCNT method had a limit of detection (LOD) of 40 nM. The amSWCNT method had a significantly lower LOD of 14 nM. Turn-on fluorescent nano-aptasensors are emerging as an effective diagnostic tool for simple detection of mycotoxins. Nanocomplexes designed for the detection of mycotoxins in solution and paper-based tests have proven to be useful.

| S-EPMC9081825 | biostudies-literature

Biopolymeric nano/microspheres for selective and reversible adsorption of coronaviruses.

Project description:A novel biopolymeric material in the form of nano/microspheres was developed which was capable of adsorbing coronaviruses. The biopolymer was obtained by crosslinking of chitosan (CHIT) with genipin, a nontoxic compound of plant origin, in inverted emulsion and reacting the chitosan nano/microspheres obtained (CHIT-NS/MS) with glycidyltrimethyl-ammonium chloride (GTMAC). As a result the nano/microspheres of N-(2-hydroxypropyl)-3-trimethyl chitosan (HTCC-NS/MS) were obtained. HTCC-NS/MS were studied as the adsorbents of human coronavirus NL63 (HCoV-NL63), mouse hepatitis virus (MHV), and human coronavirus HCoV-OC43 particles in aqueous virus suspensions. By studying cytopathic effect (CPE) caused by these viruses and performing PCR analyses it was found HTCC-NS/MS strongly adsorb the particles of HCoV-NL63 virus, moderately adsorb mouse hepatitis virus (MHV) particles, but do not adsorb HCoV-OC43 coronavirus. The adsorption capacity of HTCC-NS/MS well correlated with the antiviral activity of soluble HTCC against a given virus. Importantly, it was shown that HCoV-NL63 particles could be desorbed from the HTCC-NS/MS surface with a salt solution of high ionic strength with retention of virus virulence. The obtained material may be applied for the removal of coronaviruses, purification and concentration of virus samples obtained from biological matrices and for purification of water from pathogenic coronaviruses.

| S-EPMC7126271 | biostudies-literature

Micro- and Nano-assembly of Composite Particles by Electrostatic Adsorption.

Project description:This work reports on a novel controlled nanocomposite fabrication technique which is applicable for material design via a micro- and nano-assembly method. The principle is based on the use of electrostatic adsorption of the surface charge-modified particles via layer-by-layer assembly. The polarity and the zeta potential of the surface charge was controlled using polycation and polyanion, while the zeta potential strength was controlled via the number of alternating coating layers which was determined using zeta potential measurement. A systematic study was conducted to demonstrate the feasibility of composite material assembly via electrostatic adsorption using alumina (Al2O3) and silica (SiO2) composite as a study model, which was carried out as a function of surface zeta potential, surface coverage percentage, and processing time. The considerable potential of this technique for composite material design is also further demonstrated with controlled assembly involving different materials in various structural forms such as fiber, whisker, nanosheets, and even irregular-shaped foam-like structured urethane. The composite materials designed using this EA method possess good potentials to be utilized for various applications such as mechanical property control, composite ceramic films formation, selective laser sintering, and rechargeable metal-air battery.

| S-EPMC6713769 | biostudies-literature

Effective La-Na Co-Doped TiO₂ Nano-Particles for Dye Adsorption: Synthesis, Characterization and Study on Adsorption Kinetics.

Project description:The mesoporous La-Na co-doped TiO₂ nanoparticles (NPs) have been synthesized by non-aqueous, solvent-controlled, sol-gel route. The substitutional doping of large sized Na+1 and La+3 at Ti4+ is confirmed by X-ray diffraction (XRD) and further supported by Transmission Electron Microscopy (TEM) and X-ray Photo-electron Spectroscopy (XPS). The consequent increase in adsorbed hydroxyl groups at surface of La-Na co-doped TiO₂ results in decrease in pHIEP, which makes nanoparticle surface more prone to cationic methylene blue (MB) dye adsorption. The MB dye removal was examined by different metal doping, pH, contact time, NPs dose, initial dye concentration and temperature. Maximum dye removal percentage was achieved at pH 7.0. The kinetic analysis suggests adsorption dynamics is best described by pseudo second-order kinetic model. Langmuir adsorption isotherm studies revealed endothermic monolayer adsorption of Methylene Blue dye.

| S-EPMC6474146 | biostudies-literature

A Porous Aromatic Framework Constructed from Benzene Rings Has a High Adsorption Capacity for Perfluorooctane Sulfonate.

Project description:A low-cost and easily constructed porous aromatic framework (PAF-45) was successfully prepared using the Scholl reaction. PAF-45 was, for the first time, used to remove perfluorooctane sulfonate (PFOS) from aqueous solution. Systematic experiments were performed to determine the adsorption capacity of PAF-45 for PFOS and to characterize the kinetics of the adsorption process. The adsorption of PFOS onto PAF-45 reached equilibrium in 30 min, and the adsorption capacity of PAF-45 for PFOS was excellent (5847 mg g(-1) at pH 3). The amount of PFOS adsorbed by PAF-45 increased significantly as the cation (Na(+), Mg(2+), or Fe(3+)) concentration increased, which probably occurred because the cations enhanced the interactions between the negatively charged PFOS molecules and the positively charged PAF-45 surface. The cations Na(+), Mg(2+), and Fe(3+) were found to form complexes with PFOS anions in solution. Density functional theory was used to identify the interactions between PFOS and Na(+), Mg(2+), and Fe(3+). We expect that materials of the same type as PAF-45 could be useful adsorbents for removing organic pollutants from industrial wastewater and contaminated surface water.

| S-EPMC4740861 | biostudies-literature

Adsorption of thallium(I) on rutile nano-titanium dioxide and environmental implications.

Project description:Rutile nano-titanium dioxide (RNTD) characterized by loose particles with diameter in 20-50 nm has a very large surface area for adsorption of Tl, a typical trace metal that has severe toxicity. The increasing application of RNTD and widespread discharge of Tl-bearing effluents from various industrial activities would increase the risk of their co-exposure in aquatic environments. The adsorption behavior of Tl(I) (a prevalent form of Tl in nature) on RNTD was studied as a function of solution pH, temperature, and ion strength. Adsorption isotherms, kinetics, and thermodynamics for Tl(I) were also investigated. The adsorption of Tl(I) on RNTD started at very low pH values and increased abruptly, then maintained at high level with increasing pH >9. Uptake of Tl(I) was very fast on RNTD in the first 15 min then slowed down. The adsorption of Tl(I) on RNTD was an exothermic process; and the adsorption isotherm of Tl(I) followed the Langmuir model, with the maximum adsorption amount of 51.2 mg/g at room temperature. The kinetics of Tl adsorption can be described by a pseudo-second-order equation. FT-IR spectroscopy revealed that -OH and -TiOO-H play an important role in the adsorption. All these results indicate that RNTD has a fast adsorption rate and excellent adsorption amount for Tl(I), which can thus alter the transport, bioavailability and fate of Tl(I) in aqueous environment.

| S-EPMC6526007 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data