Dataset Information

Experimental data for synthesis of bi-metalized chitosan particle for attenuating of an azo dye from wastewater.

ABSTRACT: In this data article, we introduce data acquired from new adsorbent, bi-metalized chitosan particle that is successfully synthesized and applied to remove the orange II dye, an azo dye, from textile wastewater. The adsorbent was meso- and macro-porous material with BET surface area of 12.69 m(2)/g and pHzpc 6.6. The simulated textile-wastewater can be significantly treated using a relatively low quantity of the adsorbent. Overall, the use of bi-metalized chitosan particle can be considered a promising method for eliminating the azo dye from wastewater effectively. Accordingly, these data will be useful for decolorizing of azo dyes from textile wastewater.

SUBMITTER: Hajivandi A

PROVIDER: S-EPMC4761697 | biostudies-literature | 2016 Jun

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Experimental data for synthesis of bi-metalized chitosan particle for attenuating of an azo dye from wastewater.

Hajivandi Abdollah A Farjadfard Sima S Ramavandi Bahman B Akbarzadeh Samad S

Data in brief 20160210

In this data article, we introduce data acquired from new adsorbent, bi-metalized chitosan particle that is successfully synthesized and applied to remove the orange II dye, an azo dye, from textile wastewater. The adsorbent was meso- and macro-porous material with BET surface area of 12.69 m(2)/g and pHzpc 6.6. The simulated textile-wastewater can be significantly treated using a relatively low quantity of the adsorbent. Overall, the use of bi-metalized chitosan particle can be considered a pro ...[more]

PMID: 26955651

Similar Datasets

Project description:A novel approach to enhance the utilization of low-cost and sustainable chitosan for wastewater remediation is presented in this investigation. The study centers around the modification of chitosan beads using a deep eutectic solvent composed of choline chloride and urea at a molar ratio of 1:2, followed by treatment with sulfuric acid using an impregnation accessible methodology. The effectiveness of the modified chitosan beads as an adsorbent was evaluated by studying the removal of the azo dye Reactive Black 5 (RB5) from aqueous solutions. Remarkably, the modified chitosan beads demonstrated a substantial increase in adsorption efficiency, achieving excellent removal of RB5 within the concentration range of 25-250 mg/L, ultimately leading to complete elimination. Several key parameters influencing the adsorption process were investigated, including initial RB5 concentration, adsorbent dosage, contact time, temperature, and pH. Quantitative analysis revealed that the pseudo-second-order kinetic model provided the best fit for the experimental data at lower dye concentrations, while the intraparticle diffusion model showed superior performance at higher RB5 concentration ranges (150-250 mg/L). The experimental data were successfully explained by the Langmuir isotherm model, and the maximum adsorption capacities were found to be 116.78 mg/g at 298 K and 379.90 mg/g at 318 K. Desorption studies demonstrated that approximately 41.7% of the dye could be successfully desorbed in a single cycle. Moreover, the regenerated adsorbent exhibited highly efficient RB5 removal (80.0-87.6%) for at least five consecutive uses. The outstanding adsorption properties of the modified chitosan beads can be attributed to the increased porosity, surface area, and swelling behavior resulting from the acidic treatment in combination with the DES modification. These findings establish the modified chitosan beads as a stable, versatile, and reusable eco-friendly adsorbent with high potential for industrial implementation.

Project description:Water pollution by dyes is a huge environmental problem; there is a necessity to produce new decolorization methods that are effective, cost-attractive, and acceptable in industrial use. Magnetic cyclodextrin polymers offer the advantage of easy separation from the dye solution. In this work, the β-CD-EPI-magnetic (β-cyclodextrin-epichlorohydrin) polymer was synthesized, characterized, and tested for removal of the azo dye Direct Red 83:1 from water, and the fraction of non-adsorbed dye was degraded by an advanced oxidation process. The polymer was characterized in terms of the particle size distribution and surface morphology (FE-SEM), elemental analysis (EA), differential scanning calorimetry (DSC), thermal gravimetric analysis (TGA), infrared spectrophotometry (IR), and X-ray powder diffraction (XRD). The reported results hint that 0.5 g and pH 5.0 were the best conditions to carry out both kinetic and isotherm models. A 30 min contact time was needed to reach equilibrium with a qmax of 32.0 mg/g. The results indicated that the pseudo-second-order and intraparticle diffusion models were involved in the assembly of Direct Red 83:1 onto the magnetic adsorbent. Regarding the isotherms discussed, the Freundlich model correctly reproduced the experimental data so that adsorption was confirmed to take place onto heterogeneous surfaces. The calculation of the thermodynamic parameters further demonstrates the spontaneous character of the adsorption phenomena (ΔG° = -27,556.9 J/mol) and endothermic phenomena (ΔH° = 8757.1 J/mol) at 25 °C. Furthermore, a good reusability of the polymer was evidenced after six cycles of regeneration, with a negligible decline in the adsorption extent (10%) regarding its initial capacity. Finally, the residual dye in solution after treatment with magnetic adsorbents was degraded by using an advanced oxidation process (AOP) with pulsed light and hydrogen peroxide (343 mg/L); >90% of the dye was degraded after receiving a fluence of 118 J/cm2; the discoloration followed a pseudo first-order kinetics where the degradation rate was 0.0196 cm2/J. The newly synthesized β-CD-EPI-magnetic polymer exhibited good adsorption properties and separability from water which, when complemented with a pulsed light-AOP, may offer a good alternative to remove dyes such as Direct Red 83:1 from water. It allows for the reuse of both the polymer and the dye in the dyeing process.

Dataset Information

Experimental data for synthesis of bi-metalized chitosan particle for attenuating of an azo dye from wastewater.

Publications

Experimental data for synthesis of bi-metalized chitosan particle for attenuating of an azo dye from wastewater.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets