Dataset Information

Early Onset of Nucleate Boiling on Gas-covered Biphilic Surfaces.

ABSTRACT: For phase-change cooling schemes for electronics, quick activation of nucleate boiling helps safeguard the electronics components from thermal shocks associated with undesired surface superheating at boiling incipience, which is of great importance to the long-term system stability and reliability. Previous experimental studies show that bubble nucleation can occur surprisingly early on mixed-wettability surfaces. In this paper, we report unambiguous evidence that such unusual bubble generation at extremely low temperatures-even below the boiling point-is induced by a significant presence of incondensable gas retained by the hydrophobic surface, which exhibits exceptional stability even surviving extensive boiling deaeration. By means of high-speed imaging, it is revealed that the consequently gassy boiling leads to unique bubble behaviour that stands in sharp contrast with that of pure vapour bubbles. Such findings agree qualitatively well with numerical simulations based on a diffuse-interface method. Moreover, the simulations further demonstrate strong thermocapillary flows accompanying growing bubbles with considerable gas contents, which is associated with heat transfer enhancement on the biphilic surface in the low-superheat region.

SUBMITTER: Shen B

PROVIDER: S-EPMC5435692 | biostudies-literature | 2017 May

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Early Onset of Nucleate Boiling on Gas-covered Biphilic Surfaces.

Shen Biao B Yamada Masayuki M Hidaka Sumitomo S Liu Jiewei J Shiomi Junichiro J Amberg Gustav G Do-Quang Minh M Kohno Masamichi M Takahashi Koji K Takata Yasuyuki Y

Scientific reports 20170517 1

For phase-change cooling schemes for electronics, quick activation of nucleate boiling helps safeguard the electronics components from thermal shocks associated with undesired surface superheating at boiling incipience, which is of great importance to the long-term system stability and reliability. Previous experimental studies show that bubble nucleation can occur surprisingly early on mixed-wettability surfaces. In this paper, we report unambiguous evidence that such unusual bubble generation ...[more]

PMID: 28515431

Similar Datasets

Project description:This study addresses the combination of customized surface modification with the use of nanofluids, to infer on its potential to enhance pool-boiling heat transfer. Hydrophilic surfaces patterned with superhydrophobic regions were developed and used as surface interfaces with different nanofluids (water with gold, silver, aluminum and alumina nanoparticles), in order to evaluate the effect of the nature and concentration of the nanoparticles in bubble dynamics and consequently in heat transfer processes. The main qualitative and quantitative analysis was based on extensive post-processing of synchronized high-speed and thermographic images. To study the nucleation of a single bubble in pool boiling condition, a numerical model was also implemented. The results show an evident benefit of using biphilic patterns with well-established distances between the superhydrophobic regions. This can be observed in the resulting plot of the dissipated heat flux for a biphilic pattern with seven superhydrophobic spots, δ = 1/d and an imposed heat flux of 2132 w/m2. In this case, the dissipated heat flux is almost constant (except in the instant t* ≈ 0.9 when it reaches a peak of 2400 W/m2), whilst when using only a single superhydrophobic spot, where the heat flux dissipation reaches the maximum shortly after the detachment of the bubble, dropping continuously until a new necking phase starts. The biphilic patterns also allow a controlled bubble coalescence, which promotes fluid convection at the hydrophilic spacing between the superhydrophobic regions, which clearly contributes to cool down the surface. This effect is noticeable in the case of employing the Ag 1 wt% nanofluid, with an imposed heat flux of 2132 W/m2, where the coalescence of the drops promotes a surface cooling, identified by a temperature drop of 0.7 °C in the hydrophilic areas. Those areas have an average temperature of 101.8 °C, whilst the average temperature of the superhydrophobic spots at coalescence time is of 102.9 °C. For low concentrations as the ones used in this work, the effect of the nanofluids was observed to play a minor role. This can be observed on the slight discrepancy of the heat dissipation decay that occurred in the necking stage of the bubbles for nanofluids with the same kind of nanoparticles and different concentration. For the Au 0.1 wt% nanofluid, a heat dissipation decay of 350 W/m2 was reported, whilst for the Au 0.5 wt% nanofluid, the same decay was only of 280 W/m2. The results of the numerical model concerning velocity fields indicated a sudden acceleration at the bubble detachment, as can be qualitatively analyzed in the thermographic images obtained in this work. Additionally, the temperature fields of the analyzed region present the same tendency as the experimental results.

Project description:In this work, we investigate and compare the condensation behavior of hydrophilic, hydrophobic, and biphilic microgrooved silicon samples etched by reactive ion etching. The microgrooves were 25 mm long and 17-19 μm deep with different topologies depending on the etching process. Anisotropically etched samples had 30 μm wide rectangular microgrooves and silicon ridges between them. They were either left hydrophilic or covered with a hydrophobic fluorocarbon or photoresist layer. Anisotropically etched samples consisted of 48 μm wide semicircular shaped microgrooves, 12 μm wide silicon ridges between them, and a 30 μm wide photoresist stripe centered on the ridges. The lateral dimensions were chosen to be much smaller than the capillary length of water to support drainage of droplets by coalescence rather than droplet sliding. Furthermore, to achieve a low thermal resistance of the periodic surface structure consisting of water-filled grooves and silicon ridges, the trench depth was also kept small. The dripped-off total amount of condensate (AoC) was measured for each sample for 12 h under the same boundary conditions (chamber temperature 30 °C, cooling temperature 6 °C, and relative humidity 60%). The maximum increase in AoC of 15.9% (9.6%) against the hydrophilic (hydrophobic) reference sample was obtained for the biphilic samples. In order to elucidate their unique condensation behavior, in situ optical imaging was performed at normal incidence. It shows that the drainage of droplets from the stripe's surface into the microgrooves as well as occasional droplet sliding events are the dominant processes to clear the surface. To rationalize this behavior, the Hough Circle Transform algorithm was implemented for image processing to receive additional information about the transient droplet size and number distribution. Postprocessing of these data allows calculation of the transient water load on the stripe's surface, which shows an oscillatory behavior not previously reported in the literature.

Dataset Information

Early Onset of Nucleate Boiling on Gas-covered Biphilic Surfaces.

Publications

Early Onset of Nucleate Boiling on Gas-covered Biphilic Surfaces.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets