Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Improving the electrocatalytic properties of Pd-based catalyst for direct alcohol fuel cells: effect of solid solution.

ABSTRACT: The tolerance of the electrode against the CO species absorbed upon the surface presents the biggest dilemma of the alcohol fuel cells. Here we report for the first time that the inclusion of (Zr, Ce)O₂ solid solution as the supporting material can significantly improve the anti-CO-poisoning as well as the activity of Pd/C catalyst for ethylene glycol electro-oxidation in KOH medium. In particular, the physical origin of the improved electrocatalytic properties has been unraveled by first principle calculations. The 3D stereoscopic Pd cluster on the surface of (Zr, Ce)O₂ solid solution leads to weaker Pd-C bonding and smaller CO desorption driving force. These results support that the Pd/ZrO₂-CeO₂/C composite catalyst could be used as a promising effective candidate for direct alcohol fuel cells application.

SUBMITTER: Wen C

PROVIDER: S-EPMC5501847 | biostudies-literature | 2017 Jul

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Improving the electrocatalytic properties of Pd-based catalyst for direct alcohol fuel cells: effect of solid solution.

Wen Cuilian C Wei Ying Y Tang Dian D Sa Baisheng B Zhang Teng T Chen Changxin C

Scientific reports 20170707 1

The tolerance of the electrode against the CO species absorbed upon the surface presents the biggest dilemma of the alcohol fuel cells. Here we report for the first time that the inclusion of (Zr, Ce)O<sub>2</sub> solid solution as the supporting material can significantly improve the anti-CO-poisoning as well as the activity of Pd/C catalyst for ethylene glycol electro-oxidation in KOH medium. In particular, the physical origin of the improved electrocatalytic properties has been unraveled by f ...[more]

PMID: 28687772

Similar Datasets

Novel anode catalyst for direct methanol fuel cells.

Project description:PtRu catalyst is a promising anodic catalyst for direct methanol fuel cells (DMFCs) but the slow reaction kinetics reduce the performance of DMFCs. Therefore, this study attempts to improve the performance of PtRu catalysts by adding nickel (Ni) and iron (Fe). Multiwalled carbon nanotubes (MWCNTs) are used to increase the active area of the catalyst and to improve the catalyst performance. Electrochemical analysis techniques, such as energy dispersive X-ray spectrometry (EDX), X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), and X-ray photoelectron spectroscopy (XPS), are used to characterize the kinetic parameters of the hybrid catalyst. Cyclic voltammetry (CV) is used to investigate the effects of adding Fe and Ni to the catalyst on the reaction kinetics. Additionally, chronoamperometry (CA) tests were conducted to study the long-term performance of the catalyst for catalyzing the methanol oxidation reaction (MOR). The binding energies of the reactants and products are compared to determine the kinetics and potential surface energy for methanol oxidation. The FESEM analysis results indicate that well-dispersed nanoscale (2-5 nm) PtRu particles are formed on the MWCNTs. Finally, PtRuFeNi/MWCNT improves the reaction kinetics of anode catalysts for DMFCs and obtains a mass current of 31 A g(-1) catalyst.

| S-EPMC4032773 | biostudies-other

Hydrogen storage and stability properties of Pd-Pt solid-solution nanoparticles revealed via atomic and electronic structure.

Project description:Bimetallic Pd1-x Pt x solid-solution nanoparticles (NPs) display charging/discharging of hydrogen gas, which has relevance for fuel cell technologies; however, the constituent elements are immiscible in the bulk phase. We examined these material systems using high-energy synchrotron X-ray diffraction, X-ray absorption fine structure and hard X-ray photoelectron spectroscopy techniques. Recent studies have demonstrated the hydrogen storage properties and catalytic activities of Pd-Pt alloys; however, comprehensive details of their structural and electronic functionality at the atomic scale have yet to be reported. Three-dimensional atomic-scale structure results obtained from the pair distribution function (PDF) and reverse Monte Carlo (RMC) methods suggest the formation of a highly disordered structure with a high cavity-volume-fraction for low-Pt content NPs. The NP conduction band features, as extracted from X-ray absorption near-edge spectra at the Pd and Pt L III -edge, suggest that the Pd conduction band is filled by Pt valence electrons. This behaviour is consistent with observations of the hydrogen storage capacity of these NPs. The broadening of the valence band width and the down-shift of the d-band centre away from the Fermi level upon Pt substitution also provided evidence for enhanced stability of the hydride (ΔH) features of the Pd1-x Pt x solid-solution NPs with a Pt content of 8-21 atomic percent.

| S-EPMC5668347 | biostudies-literature

Direct methane protonic ceramic fuel cells with self-assembled Ni-Rh bimetallic catalyst.

Project description:Direct methane protonic ceramic fuel cells are promising electrochemical devices that address the technical and economic challenges of conventional ceramic fuel cells. However, Ni, a catalyst of protonic ceramic fuel cells exhibits sluggish reaction kinetics for CH4 conversion and a low tolerance against carbon-coking, limiting its wider applications. Herein, we introduce a self-assembled Ni-Rh bimetallic catalyst that exhibits a significantly high CH4 conversion and carbon-coking tolerance. It enables direct methane protonic ceramic fuel cells to operate with a high maximum power density of ~0.50 W·cm-2 at 500 °C, surpassing all other previously reported values from direct methane protonic ceramic fuel cells and even solid oxide fuel cells. Moreover, it allows stable operation with a degradation rate of 0.02%·h-1 at 500 °C over 500 h, which is ~20-fold lower than that of conventional protonic ceramic fuel cells (0.4%·h-1). High-resolution in-situ surface characterization techniques reveal that high-water interaction on the Ni-Rh surface facilitates the carbon cleaning process, enabling sustainable long-term operation.

| S-EPMC10657466 | biostudies-literature

High-Power Abiotic Direct Glucose Fuel Cell Using a Gold-Platinum Bimetallic Anode Catalyst.

Project description:We developed a high-power abiotic direct glucose fuel cell system using a Au-Pt bimetallic anode catalyst. The high power generation (95.7 mW cm-2) was attained by optimizing operating conditions such as the composition of a bimetallic anode catalyst, loading amount of the metal catalyst on a carbon support, ionomer/carbon weight ratio when the catalyst was applied to the anode, glucose and KOH concentrations in the fuel solution, and operating temperature and flow rate of the fuel solution. It was found that poly(N-vinyl-2-pyrrolidone)-stabilized Au80Pt20 nanoparticles (mean diameter 1.5 nm) on a carbon (Ketjen Black 600) support function as a highly active anode catalyst for the glucose electrooxidation. The ionomer/carbon weight ratio also greatly affects the cell properties, which was found to be optimal at 0.2. As for the glucose concentration, a maximum cell power was derived at 0.4-0.6 mol dm-3. A high KOH concentration (4.0 mol dm-3) was preferable for deriving the maximum power. The cell power increased with the increasing flow rate of the glucose solution up to 50 cm3 min-1 and leveled off thereafter. At the optimal condition, the maximum power density and corresponding cell voltage of 58.2 mW cm-2 (0.36 V) and 95.7 mW cm-2 (0.34 V) were recorded at 298 and 328 K, respectively.

| S-EPMC6643607 | biostudies-literature

High Power Density Direct Formate Microfluidic Fuel Cells with the Different Catalyst-Free Oxidants.

Project description:As micropower devices, microfluidic fuel cells (MFCs) have gained much attention due to their simple configurations and high power densities. MFCs exploit the parallel laminar flowing of two electrolytes in a microchannel with a characteristic length from 1 to 1000 μm to separate the anolyte and catholyte, without the proton exchange membranes in the traditional fuel cells. These membrane-less configurations can avoid a series of technical problems related to the membranes. To achieve an MFC with high power density and low cost, we constructed the direct formate MFCs with two catalyst-free oxidants containing FeCl3 and Na2S2O8 solutions, respectively, and compared the performance of the two MFCs. Due to Na2S2O8 being an oxidant with some distinctive advantages, including its high theoretical potential, high solubility of itself and its reduction product, and environmental friendliness, the Na2S2O8-based MFC showed a higher open-circuit voltage (>2.0 V) and better performance. Then, we studied the effects of oxidant concentrations, flow rates, and fuel concentrations on the performance of the Na2S2O8-based MFC. The results showed the optimum performance of the Na2S2O8-based MFC with the peak power density of 214.95 mW cm-2 and the limiting current density of 700.13 mA cm-2 under the conditions of 1.5 M HCOONa, 2 M Na2S2O8, and 300 μL min-1 at an anolyte/catholyte flow ratio of 2:1. The performance was also the highest among the direct formate MFCs reported up to now. Moreover, the Na2S2O8-based MFC could stably discharge for about 4 h under a constant voltage. All of the results demonstrated that Na2S2O8 was a suitable oxidant and that the Na2S2O8-based MFC could realize the goals of high power density and low cost for the actual application of MFCs.

| S-EPMC9386720 | biostudies-literature

Effect of bimodal mesoporous carbon as PtRu catalyst support for direct methanol fuel cells.

Project description:Mesoporous carbons (MCs) with different pore sizes were synthesized and evaluated as a catalyst support for fuel cells. The MCs were obtained from resorcinol-formaldehyde precursors, polymerized in the presence of polydiallyldimethylammonium chloride (cationic polyelectrolyte) as a structuring agent and commercial silica (Sipernat® or Aerosil®) as the hard template. The MC obtained with Aerosil® shows a broad pore size distribution with a maximum at 21 nm. On the other hand, the MCs with Sipernat® show a bimodal pore size distribution, with a narrow peak centered at 5 nm and a broad peak with a maximum ca. 30 nm. All MCs present a high specific surface area (800-1000 m2 g-1) and total pore volume ranging from 1.36 to 1.69 cm3 g-1. PtRu nanoparticles were deposited onto the MC support by an impregnation-reduction method with NaBH4 at 80 °C in basic media. The electrochemical characterization reveals improved electrocatalysis towards the methanol oxidation for the catalyst deposited over the carbon with the highest total pore volume. This catalyst also presented the highest CO2 conversion efficiency, ca. 80%, for the methanol oxidation as determined by differential electrochemical mass spectroscopy analysis. Moreover, the catalyst as a fuel cell anode showed the best performance, reaching a power density of 125 mW cm-2 at 90 °C with methanol as fuel and dry O2.

| S-EPMC9056354 | biostudies-literature

Improving the Energetic Stability and Electrocatalytic Performance of Au/WSSe Single-Atom Catalyst with Tensile Strain.

Project description:In the areas of catalysis and renewable energy conversion, the development of active and stable electrocatalysts continues to be a highly desirable and crucial aim. Single-atom catalysts (SACs) provide isolated active sites, high selectivity, and ease of separation from reaction systems, becoming a rapidly evolving research field. Unfortunately, the real roles and key factors of the supports that govern the catalytic properties of SACs remain uncertain. Herein, by means of the density functional theory calculations, in the Au/WSSe SAC, built by filling the single Au atom at the S vacancy site in WSSe monolayer, we find that the powerful binding between the single Au atom and the support is induced by the Au d and W d orbital hybridization, which is caused by the electron transfer between them. The extra tensile strain could further stabilize the Au/WSSe by raising the transfer electron and enhancing the orbital hybridization. Moreover, by dint of regulating the antibonding strength between the single Au atom and H atom, the extra tensile strain is capable of changing the electric-catalytic hydrogen evolution reaction (HER) performance of Au/WSSe as well. Remarkably, under the 1% tensile strain, the reaction barrier (0.06 eV) is only one third of that of free state. This theoretical work not only reveals the bonding between atomic sites and supports, but also opens an avenue to improve the electric-catalytic performance of SACs by adjusting the bonding with outer factors.

| S-EPMC9414615 | biostudies-literature

Alcohol Diffusion in Alkali-Metal-Doped Polymeric Membranes for Using in Alkaline Direct Alcohol Fuel Cells.

Project description:The alcohol permeability of anion exchange membranes is a crucial property when they are used as a solid electrolyte in alkaline direct alcohol fuel cells and electrolyzers. The membrane is the core component to impede the fuel crossover and allows the ionic transport, and it strongly affects the fuel cell performance. The aim of this work is to compare different anion exchange membranes to be used as an electrolyte in alkaline direct alcohol fuels cells. The alcohol permeability of four commercial anion exchange membranes with different structure were analyzed in several hydro-organic media. The membranes were doped using different types of alkaline doping agents (LiOH, NaOH, and KOH) and different conditions to analyze the effect of the treatment on the membrane behavior. Methanol, ethanol, and 1-propanol were analyzed. The study was focused on the diffusive contribution to the alcohol crossover that affects the fuel cell performance. To this purpose, alcohol permeability was determined for various membrane systems. The results show that membrane alcohol permeability is affected by the doping conditions, depending on the effect on the type of membrane and alcohol nature. In general, heterogeneous membranes presented a positive correlation between alcohol permeability and doping capacity, with a lower effect for larger-size alcohols. A definite trend was not observed for homogeneous membranes.

| S-EPMC9318451 | biostudies-literature

Electrocatalytic Properties of Mixed-Oxide-Containing Composite-Supported Platinum for Polymer Electrolyte Membrane (PEM) Fuel Cells.

Project description:TiO2-based mixed oxide-carbon composite supports have been suggested to provide enhanced stability for platinum (Pt) electrocatalysts in polymer electrolyte membrane (PEM) fuel cells. The addition of molybdenum (Mo) to the mixed oxide is known to increase the CO tolerance of the electrocatalyst. In this work Pt catalysts, supported on Ti1-xMoxO2-C composites with a 25/75 oxide/carbon mass ratio and prepared from different carbon materials (C: Vulcan XC-72, unmodified and functionalized Black Pearls 2000), were compared in the hydrogen oxidation reaction (HOR) and in the oxygen reduction reaction (ORR) with a commercial Pt/C reference catalyst in order to assess the influence of the support on the electrocatalytic behavior. Our aim was to perform electrochemical studies in preparation for fuel cell tests. The ORR kinetic parameters from the Koutecky-Levich plot suggested a four-electron transfer per oxygen molecule, resulting in H2O. The similarity between the Tafel slopes suggested the same reaction mechanism for electrocatalysts supported by these composites. The HOR activity of the composite-supported electrocatalysts was independent of the type of carbonaceous material. A noticeable difference in the stability of the catalysts appeared only after 5000 polarization cycles; the Black Pearl-containing sample showed the highest stability.

| S-EPMC9148157 | biostudies-literature

Carbon-Supported Pd and PdFe Alloy Catalysts for Direct Methanol Fuel Cell Cathodes.

Project description:Direct methanol fuel cells (DMFCs) are electrochemical devices that efficiently produce electricity and are characterized by a large flexibility for portable applications and high energy density. Methanol crossover is one of the main obstacles for DMFC commercialization, forcing the search for highly electro-active and methanol tolerant cathodes. In the present work, carbon-supported Pd and PdFe catalysts were synthesized using a sodium borohydride reduction method and physico-chemically characterized using transmission electron microscopy (TEM) and X-ray techniques such as photoelectron spectroscopy (XPS), diffraction (XRD) and energy dispersive spectroscopy (EDX). The catalysts were investigated as DMFC cathodes operating at different methanol concentrations (up to 10 M) and temperatures (60 °C and 90 °C). The cell based on PdFe/C cathode presented the best performance, achieving a maximum power density of 37.5 mW·cm-2 at 90 °C with 10 M methanol, higher than supported Pd and Pt commercial catalysts, demonstrating that Fe addition yields structural changes to Pd crystal lattice that reduce the crossover effects in DMFC operation.

| S-EPMC5552173 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data