Design, development and performance evaluation of elephant apple core cutter.
Ontology highlight
ABSTRACT:
SUBMITTER: Nayak PK
PROVIDER: S-EPMC5643825 | biostudies-literature | 2017 Nov
REPOSITORIES: biostudies-literature
Publications
Design, development and performance evaluation of elephant apple core cutter.
Nayak Prakash Kumar PK Rayaguru Kalpana K
Journal of food science and technology 20171004 12
In this study a hand operated elephant apple cutter was developed and the machine parameters (capacity, machine efficiency, and loss percentage, etc.) were studied. The cost and performance of the designed cutter was compared to that of the traditional cutter. The comparative performance evaluation of the designed cutter with that of traditional method indicates that the cutter offered higher sepal yield (82.73 ± 1.5%) and capacity (100-120 kg h<sup>-1</sup>) than the traditional cutter offered ...[more]
Similar Datasets
Project description:Two methods were developed for the generation of cisgenic apples. Both have been successfully applied producing trees. The first method avoids the use of any foreign selectable marker genes; only the gene-of-interest is integrated between the T-DNA border sequences. The second method makes use of recombinase-based marker excision. For the first method we used the MdMYB10 gene from a red-fleshed apple coding for a transcription factor involved in regulating anthocyanin biosynthesis. Red plantlets were obtained and presence of the cisgene was confirmed. Plantlets were grafted and grown in a greenhouse. After 3 years, the first flowers appeared, showing red petals. Pollination led to production of red-fleshed cisgenic apples. The second method used the pM(arker)F(ree) vector system, introducing the scab resistance gene Rvi6, derived from apple. Agrobacterium-mediated transformation, followed by selection on kanamycin, produced genetically modified apple lines. Next, leaves from in vitro material were treated to activate the recombinase leading to excision of selection genes. Subsequently, the leaf explants were subjected to negative selection for marker-free plantlets by inducing regeneration on medium containing 5-fluorocytosine. After verification of the marker-free nature, the obtained plants were grafted onto rootstocks. Young trees from four cisgenic lines and one intragenic line, all containing Rvi6, were planted in an orchard. Appropriate controls were incorporated in this trial. We scored scab incidence for three consecutive years on leaves after inoculations with Rvi6-avirulent strains. One cisgenic line and the intragenic line performed as well as the resistant control. In 2014 trees started to overcome their juvenile character and formed flowers and fruits. The first results of scoring scab symptoms on apple fruits were obtained. Apple fruits from susceptible controls showed scab symptoms, while fruits from cisgenic and intragenic lines were free of scab.
| S-EPMC4410516 | biostudies-literature
Project description:A transportation container was developed to minimize transportation losses of sapota fruit. The container was made of corrugated polypropylene (PP) sheet. The container is completely foldable, reusable and enclosed condition for protecting produce from adverse climate. The adjustable cells were made to enhance the safety of fruits. Separation sheets were provided in a container to support the fruits. Perforation was provided for proper respiration of the fruits. Velcro feature was provided to erect and fold the container. Freshly harvested and uniformly matured and graded sapota fruits were transported in seven types of containers or bags with 10 kg capacity stacked in six layers viz.; gunny bag, gunny bag lined with bubble sheet, perforated PP bag, foldable plastic container, egg tray in corrugated fiberboard box (CFB) carton, plastic crate and CFB carton. The fruits were transported from Junagadh to Jamnagar and returned from Jamnagar to Junagadh by road approximately 350 km in goods rickshaw. Effect of different containers on quality parameters of sapota fruits viz., hardness (30.09 kg/cm2), firmness (12.63 kgf) and rupture force (100.2 kgf) were found maximum and weight loss (1.01%), deformation (10.9 mm) and total soluble solids (16.40°Brix) were found minimum in the fruits transported in foldable plastic container. Bruising, cracking and impact damage were not observed on the fruits transported in foldable plastic container. Maximum marketable fruits (98.37%) were observed in foldable plastic container. Transportation losses of sapota fruits in foldable plastic container were minimized 8.65% and 2.85% as compared to gunny bag and plastic crate, respectively.
| S-EPMC8357876 | biostudies-literature
Project description:Herein, we describe the design and synthesis of a suite of molecules based on a benzodithiophene "universal crystal engineering core". After computationally screening derivatives, a trialkylsilylethyne-based crystal engineering strategy was employed to tailor the crystal packing for use as the active material in an organic field-effect transistor. Electronic structure calculations were undertaken to reveal derivatives that exhibit exceptional potential for high-efficiency hole transport. The promising theoretical properties are reflected in the preliminary device results, with the computationally optimized material showing simple solution processing, enhanced stability, and a maximum hole mobility of 1.6 cm2 V-1 s-1.
| S-EPMC6988752 | biostudies-literature
Project description:The Polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP) is a relatively simple and inexpensive method for genotyping single nucleotide polymorphisms (SNPs). It requires minimal investment in instrumentation. Here, we describe a web application, 'SNP Cutter,' which designs PCR-RFLP assays on a batch of SNPs from the human genome. NCBI dbSNP rs IDs or formatted SNPs are submitted into the SNP Cutter which then uses restriction enzymes from a pre-selected list to perform enzyme selection. The program is capable of designing primers for either natural PCR-RFLP or mismatch PCR-RFLP, depending on the SNP sequence data. SNP Cutter generates the information needed to evaluate and perform genotyping experiments, including a PCR primers list, sizes of original amplicons and different allelic fragment after enzyme digestion. Some output data is tab-delimited, therefore suitable for database archiving. The SNP Cut-ter is available at http://bioinfo.bsd.uchicago.edu/SNP_cutter.htm.
| S-EPMC1160119 | biostudies-literature
Project description:Kaposi's sarcoma-associated herpesvirus (KSHV) is the causative agent of Kaposi's sarcoma (KS) and two human lymphoproliferative diseases: primary effusion lymphoma and AIDS-related multicentric Castleman's disease. KSHV latency-associated nuclear antigen (LANA) is expressed in KSHV-infected cancer cells and is responsible for maintaining viral genomes in infected cells. Thus, LANA is an attractive target for therapeutic intervention for KSHV-associated diseases. Here, we devised a gene therapy vector using the adeno-associated virus (AAV), which capitalizes the LANA's function to tether terminal repeat (TR) containing circular genome in latently infected cells and the TR's enhancer function for KSHV inducible gene promoters. By including two TR copies with a lytic inducible gene promoter (TR2-Orip), we generated an AAV vector, which expresses an engineered thymidine kinase (TK) selectively in KSHV-infected cells. Ganciclovir (GCV), an anti-herpesvirus drug, effectively eradicated multiple KSHV-infected cells that include iPSC derived epithelial colony forming cells, but not non-KSHV-infected counterparts in the presence of AAV8-TR2-Orip-TK. In addition, AAV8-TR2-Orip-TK prevents KSHV virion production from reactivated cells, hence spreading KSHV infections from reactivated cells. Anti-cancer drugs, known to reactivate KSHV, stimulated TK expression from the vector and, therefore, synergized with AAV8 TR2-Orip-TK to induce KSHV-infected cancer cell death. Finally, the AAV8-TR2-Orip-TK with GCV completely diminished KSHV-infected cancer cells in the xenograft tumor model. Our new cancer gene therapy should augment the current clinical protocol for KS.
2025-02-19 | GSE289947 | GEO
Project description:This data is part of a miRNA platform comparison study. We compared the performance characteristics of four commercial miRNA array technologies and found that all platforms performed well in separate measures of performance. The Ambion and Agilent platforms were more accurate, whereas the Illumina and Exiqon platforms were more specific. Furthermore, the data analysis approach had a large impact on the performance, predominantly by improving precision. Performance of four (4) commercially available miRNA platforms was evaluated using 7 placenta samples spiked with synthetic microRNA spikes (in Latin-square design) absent in placenta. Platforms were primarily evaluated for accuracy and specificity.
2010-06-23 | E-GEOD-19248 | biostudies-arrayexpress
Project description:H13 die steel has the characteristics of high hardness, strong toughness, and good heat resistance, and is a typical difficult to process materials material. During the cutting process, it is prone to accelerate tool wear and cause thermal deformation. By reasonably designing micro-grooves, the comprehensive performance of the tool can be effectively improved. In this study, by optimizing the structural parameters of the micro-groove, the comprehensive performance of the tool is significantly improved, and the micro-groove optimization control mechanism is deeply analyzed. At the same time, the micro-damage problem is numerically analyzed by using the peridynamics numerical simulation and comparison experiment. Research results indicate that properly increasing the distance between the slot at the outer contour of the cutting tool and the cutting edge and projecting it in a flattened shape onto the surface of the tool, ensures a smooth transition between the groove top and bottom near the cutting edge can effectively enhance the comprehensive performance of the cutting tool. The tool's major cutting edge near-field and rake face is prone to micro-cracks resulting in crack diffusion. When the milling time is 3.5×10-6 s, the tool's major cutting edge combined displacement increases most rapidly, the major flank optimization effect is the most obvious, and the resultant displacement is reduced by about 37.06%. By optimizing the structural parameters of micro-grooves on the rake face, this study enhances the comprehensive performance of the tool and unveils the formation, distribution, and variation patterns of near-field cracks on the tool's cutting edge. The research results have certain valuable insights for the optimization design and manufacturing of high performance milling tools made from H13 die steel.
| S-EPMC11630622 | biostudies-literature
Project description:The therapeutic effectiveness of paliperidone in the treatment of schizophrenia has been limited by its poor oral bioavailability; hence, an alternative route could be appropriate. This study investigates the feasibility of developing a buccal film impregnated with paliperidone-loaded nanostructured lipid carriers (NLCs) and assesses the potential to enhance its bioavailability. Box-Behnken-based design optimization of NLCs was performed by examining the particles' physical characteristics. The polymeric film was used to load optimized NLCs, which were then assessed for their pharmaceutical properties, permeability, and pharmacokinetics. The optimization outcomes indicated that selected formulation variables had a considerable (p < 0.05) impact on responses such as particle size, entrapment efficiency, and % drug release. Desired characteristics such as a negative charge, higher entrapment efficiency, and nanoparticles with ideal size distribution were shown by optimized NLC dispersions. The developed film demonstrated excellent physico-mechanical properties, appropriate texture, good drug excipient compatibility (chemically stable formulation), and amorphous drug nature. A sustained Weibull model drug release (p < 0.0005) and superior flux (~5-fold higher, p < 0.005) were seen in NLC-loaded film compared to plain-drug-loaded film. The pharmacokinetics profile in rabbits supports the goal of buccal therapy as evidenced by significantly higher AUC0-12 (p < 0.0001) and greater relative bioavailability (236%) than the control. These results support the conclusion that paliperidone-loaded NLC buccal film has the potential to be an alternate therapy for its effective administration in the treatment of schizophrenia.
| S-EPMC10674218 | biostudies-literature
Project description:PurposeDespite the availability of first-generation extracorporeal mechanical circulatory support (MCS) systems that are widely used throughout the world, there is a need for the next generation of smaller, more portable devices (designed without cables and a minimal number of connectors) that can be used in all in-hospital and transport settings to support patients in heart failure. Moreover, a system that can be universally used for all indications for use including cardiopulmonary bypass (CPB), uni- or biventricular support (VAD), extracorporeal membrane oxygenation (ECMO) and respiratory assist that is suitable for use for adult, neonate, and pediatric patients is desirable. Providing a single, well designed, universal technology could reduce the incidence of human errors by limiting the need for training of hospital staff on a single system for a variety of indications throughout the hospital rather than having to train on multiple complex systems. The objective of this manuscript is to describe preliminary research to develop the first prototype pump for use as a ventricular assist device for pediatric patients with the Inspired Universal MCS technology. The Inspired VAD Universal System is an innovative extracorporeal blood pumping system utilizing novel MagLev technology in a single portable integrated motor/controller unit which can power a variety of different disposable pump modules intended for neonate, pediatric, and adult ventricular and respiratory assistance.MethodsA prototype of the Inspired Pediatric VAD was constructed to determine the hemodynamic requirements for pediatric applications. The magnitude/range of hydraulic torque of the internal impeller was quantified. The hydrodynamic performance of the prototype pump was benchmarked using a static mock flow loop model containing a heated blood analogue solution to test the pump over a range of rotational speeds (500-6000 RPM), flow rates (0-3.5 L/min), and pressures (0 to ~ 420 mmHg). The device was initially powered by a shaft-driven DC motor in lieu of a full MagLev design, which was also used to calculate the fluid torque acting on the impeller.ResultsThe pediatric VAD produced flows as high as 4.27 L/min against a pressure of 127 mmHg at 6000 RPM and the generated pressure and flow values fell within the desired design specifications.ConclusionsThe empirically determined performance and torque values establish the requirements for the magnetically levitated motor design to be used in the Inspired Universal MagLev System. This next step in our research and development is to fabricate a fully integrated and functional magnetically levitated pump, motor and controller system that meets the product requirement specifications and achieves a state of readiness for acute ovine animal studies to verify safety and performance of the system.
| S-EPMC8918059 | biostudies-literature
Project description:BackgroundSpurred by the Coronavirus infectious disease 2019 pandemic, aerosol containment devices (ACDs) were developed to capture infectious respiratory aerosols generated by patients at their source. Prior reviews indicated that such devices had low evidence of effectiveness, but did not address how ACDs should be evaluated, how well they should perform, nor have clearly defined performance standards. Towards developing design criteria for ACDs, two questions were posed: 1) What characteristics have guided the design of ACDs? 2) How have these characteristics been evaluated?MethodsA scoping review was performed consistent with PRISMA guidelines. Data were extracted with respect to general study information, intended use of the device, device design characteristics and evaluation.ResultsFifty-four articles were included. Evaluation was most commonly performed with respect to device aerosol containment (n = 31, 61%), with only 5 (9%), 3 (6%) and 8 (15%) formally assessing providing experience, patient experience and procedure impact, respectively. Nearly all of the studies that explored provider experience and procedure impact studied intubation. Few studies provided a priori performance criteria for any evaluation metric, or referenced any external guidelines by which to bench mark performance.ConclusionWith respect to aerosol containment, ACDs should reduce exposure among HCP with the device compared with the absence of the device, and provide ≥90% reduction in respirable aerosols, equivalent in performance to N95 filtering facepiece respirators, if the goal is to reduce reliance on personal protective equipment. The ACD should not increase awkward or uncomfortable postures, or adversely impact biomechanics of the procedure itself as this could have implications for procedure outcomes. A variety of standardized instruments exist to assess the experience of patients and healthcare personnel. Integration of ACDs into routine clinical practice requires rigorous studies of aerosol containment and the user experience.
| S-EPMC9650508 | biostudies-literature