Solution-Grown CsPbBr3 Perovskite Single Crystals for Photon Detection.
Ontology highlight
ABSTRACT:
SUBMITTER: Dirin DN
PROVIDER: S-EPMC5805401 | biostudies-literature | 2016 Dec
REPOSITORIES: biostudies-literature
Publications
Solution-Grown CsPbBr<sub>3</sub> Perovskite Single Crystals for Photon Detection.
Dirin Dmitry N DN Cherniukh Ihor I Yakunin Sergii S Shynkarenko Yevhen Y Kovalenko Maksym V MV
Chemistry of materials : a publication of the American Chemical Society 20161121 23
Similar Datasets
Project description:Photon recycling, the iterative process of re-absorption and re-emission of photons in an absorbing medium, can play an important role in the power-conversion efficiency of photovoltaic cells. To date, several studies have proposed that this process may occur in bulk or thin films of inorganic lead-halide perovskites, but conclusive proof of the occurrence and magnitude of this effect is missing. Here, we provide clear evidence and quantitative estimation of photon recycling in CsPbBr3 nanocrystal suspensions by combining measurements of steady-state and time-resolved photoluminescence (PL) and PL quantum yield with simulations of photon diffusion through the suspension. The steady-state PL shows clear spectral modifications including red shifts and quantum yield decrease, while the time-resolved measurements show prolonged PL decay and rise times. These effects grow as the nanocrystal concentration and distance traveled through the suspension increase. Monte Carlo simulations of photons diffusing through the medium and exhibiting absorption and re-emission account quantitatively for the observed trends and show that up to five re-emission cycles are involved. We thus identify 4 quantifiable measures, PL red shift, PL QY, PL decay time, and PL rise time that together all point toward repeated, energy-directed radiative transfer between nanocrystals. These results highlight the importance of photon recycling for both optical properties and photovoltaic applications of inorganic perovskite nanocrystals.
| S-EPMC8603385 | biostudies-literature
Project description:Metal halide perovskites have fascinated the research community over the past decade, and demonstrated unprecedented success in optoelectronics. In particular, perovskite single crystals have emerged as promising candidates for ionization radiation detection, due to the excellent opto-electronic properties. However, most of the reported crystals are grown in organic solvents and require high temperature. In this work, we develop a low-temperature crystallization strategy to grow CsPbBr3 perovskite single crystals in water. Then, we carefully investigate the structure and optoelectronic properties of the crystals obtained, and compare them with CsPbBr3 crystals grown in dimethyl sulfoxide. Interestingly, the water grown crystals exhibit a distinct crystal habit, superior charge transport properties and better stability in air. We also fabricate X-ray detectors based on the CsPbBr3 crystals, and systematically characterize their device performance. The crystals grown in water demonstrate great potential for X-ray imaging with enhanced performance metrics.
| S-EPMC7943776 | biostudies-literature
Project description:The lead halide perovskites demonstrate huge potential for optoelectronic applications, high energy radiation detectors, light emitting devices and solar energy harvesting. Those materials exhibit strong spin-orbit coupling enabling efficient optical orientation of carrier spins in perovskite-based devices with performance controlled by a magnetic field. Here we show that elaborated time-resolved spectroscopy involving strong magnetic fields can be successfully used for perovskites. We perform a comprehensive study of high-quality lead halide perovskite CsPbBr3 crystals by measuring the exciton and charge carrier g-factors, spin relaxation times and hyperfine interaction of carrier and nuclear spins by means of coherent spin dynamics. Owing to their 'inverted' band structure, perovskites represent appealing model systems for semiconductor spintronics exploiting the valence band hole spins, while in conventional semiconductors the conduction band electrons are considered for spin functionality.
| S-EPMC6368575 | biostudies-literature
Project description:In this report, a facile one-step solution growth method has been proposed to synthesize high-quality all-inorganic CsPbBr3 single crystals. High-resolution X-ray diffraction, photoluminescence (PL), and current-voltage techniques have been performed to study the properties of CsPbBr3 single crystals. The results have shown that the as-grown CsPbBr3 single crystals exhibited a narrow X-ray rocking curve with a FWHM (full width at half maximum) of 0.043°, a narrow room-temperature PL spectrum with the FWHM of 18.9 nm, and extremely low density of traps (∼5.1 × 109 cm-3). The results shown in this work will provide a valuable strategy for the fabrication of high-quality all-inorganic CsPbBr3 single crystals.
| S-EPMC9109681 | biostudies-literature
Project description:Perovskite single crystals are actively studied as X-ray detection materials with enhanced sensitivity. Moreover, the feasibility of using perovskites for self-powered devices such as photodetectors, UV detectors, and X-ray detectors can significantly expand their application range. In this work, the charge carrier transport and photocurrent properties of MAPbBr3 single crystals (MSCs) are improved by the mechanochemical surface treatment using glycerin combined with an additional electrode design that forms an ohmic contact. The sensitivity of MSC-based detectors and pulse shape generated by X-rays are enhanced at various bias voltages. The synthesized MSC detectors generate direction-dependent photocurrents, which indicate the presence of a polarization-induced internal electric field. In addition, photocurrent signals are produced by X-rays with energies greater than 1 MeV under a zero-bias voltage. This work demonstrates a high application potential of perovskites as self-powered detectors for X-rays with energies exceeding 1 MeV.
| S-EPMC10421116 | biostudies-literature
Project description:Organic-inorganic hybrid perovskites have demonstrated exceptional photovoltaic properties, making them highly promising for solar cells and photodetectors (PDs). However, the organic components of these materials are vulnerable to heat and strong light illumination, limiting their application prospects. All-inorganic cesium-based perovskite PDs, on the other hand, possess enhanced thermal tolerance and stability, making them ideal for perovskite applications. The utilization of a ternary mixture solvent and additives in combination with single crystal (SC) growth has enabled the production of highly crystalline SCs with a defect density of 3.79 × 109 cm-3. The performance of the SC PDs had been evaluated using metal-semiconductor-metal devices, which demonstrated excellent results with a dark current as low as 0.198 μA at 10 V bias, on-off ratios exceeding 103, and a response time of shorter than 1 ms.
| S-EPMC10372932 | biostudies-literature
Project description:Optical microcavities grant manipulation over light-matter interactions and light propagation, enabling the fabrication of foundational optical and optoelectronic components. However, the materials used for high-performing systems, mostly bulk inorganics, are typically costly, and their processing is hardly scalable. In this work, we present an alternative way to fabricate planar optical resonators via solely solution processing while approaching the performances of conventional systems. Here, we couple fully solution-processed high dielectric contrast inorganic Bragg mirrors obtained by sol-gel deposition with the remarkable photoluminescence properties of CsPbBr3 perovskite nanocrystals. The approach yields microcavities with a quality factor of ∼220, which is a record value for solution-processed inorganic structures, and a strong emission redistribution resulting in a 3-fold directional intensity enhancement.
| S-EPMC10391615 | biostudies-literature
Project description:Organic-inorganic hybrid perovskites are attracting intense research effort due to their impressive performance in solar cells. While the carrier transport parameters such as mobility and bulk carrier lifetime shows sufficient characteristics, the surface recombination, which can have major impact on the solar cell performance, has not been studied. Here we measure surface recombination dynamics in CH3NH3PbBr3 perovskite single crystals using broadband transient reflectance spectroscopy. The surface recombination velocity is found to be 3.4±0.1 × 10(3) cm s(-1), ∼2-3 orders of magnitude lower than that in many important unpassivated semiconductors employed in solar cells. Our result suggests that the planar grain size for the perovskite thin films should be larger than ∼30 μm to avoid the influence of surface recombination on the effective carrier lifetime.
| S-EPMC4918347 | biostudies-literature
Project description:Semiconductor quantum dots have long been considered artificial atoms, but despite the overarching analogies in the strong energy-level quantization and the single-photon emission capability, their emission spectrum is far broader than typical atomic emission lines. Here, by using ab-initio molecular dynamics for simulating exciton-surface-phonon interactions in structurally dynamic CsPbBr3 quantum dots, followed by single quantum dot optical spectroscopy, we demonstrate that emission line-broadening in these quantum dots is primarily governed by the coupling of excitons to low-energy surface phonons. Mild adjustments of the surface chemical composition allow for attaining much smaller emission linewidths of 35-65 meV (vs. initial values of 70-120 meV), which are on par with the best values known for structurally rigid, colloidal II-VI quantum dots (20-60 meV). Ultra-narrow emission at room-temperature is desired for conventional light-emitting devices and paramount for emerging quantum light sources.
| S-EPMC9095639 | biostudies-literature
Project description:Large-sized single-crystal two-dimensional (2D) perovskites are highly desirable owing to their fundamental properties and intriguing ability to boost devices. Herein, 2-phenylethylammonium lead bromide [(PEA)2PbBr4] single crystals, which are a violet-light-emitting 2D perovskite material, with typical lateral sizes of about one centimeter were successfully grown using a seeded solution method. The single-crystal plates showed a well-defined shape (rectangle or hexagon), a natural thickness (300-500 μm) similar to that of conventional silicon and InP wafers, a large aspect ratio of ∼20, and a smooth surface (root mean square, ∼0.7 nm). We integrated these single crystal plates into an ultraviolet photodetector, achieving a low dark current of ∼10-13 A and an efficient photoresponse (on/off ratio, ∼103). This experiment could easily be extended to grow freestanding 2D perovskite single crystals on a wafer scale for practical integrated optoelectronics.
| S-EPMC9064435 | biostudies-literature