Evaluation of the microscopic observation drug susceptibility assay for the detection of first- and second-line drug susceptibility for Mycobacterium tuberculosis.
Ontology highlight
ABSTRACT:
SUBMITTER: Catanzaro DG
PROVIDER: S-EPMC6141189 | biostudies-literature | 2017 Apr
REPOSITORIES: biostudies-literature
Publications
Evaluation of the microscopic observation drug susceptibility assay for the detection of first- and second-line drug susceptibility for <i>Mycobacterium tuberculosis</i>.
Catanzaro Donald G DG Trollip Andre P AP Seifert Marva M Georghiou Sophia B SB Garfein Richard S RS Rodwell Timothy C TC Catanzaro Antonino A Eisenach Kathleen D KD
The European respiratory journal 20170405 4
Similar Datasets
Project description:(1) Background: Present methods for drug susceptibility tests (DST) rely on culture methods that are sophisticated and relatively faster, or a slow and cheaper option. These methods frustrate disease control; therefore, there is a need for methods that incorporate key functions of microscopy and culture, with reduced cost burden and sophistry. Thus, the purpose of this study was to identify which, among the most commonly used (in Ghana) methods, can conveniently be used at health centers located in rural areas for effective DST determination of Mycobacterium tuberculosis (MTB). (2) Methods: Mycobacterium tuberculosis isolates were tested for their susceptibility to streptomycin, isoniazid, rifampicin, ethambutol (SIRE), and pyrazinamide by microscopic observation drug susceptibility (MODS) and BACTEC MGIT 960 methods. Evaluations were based on shorter turnaround periods, rapidity, ease of use, cost, etc. A comparative analysis was statistically expressed as kappa values. (3) Results: Endpoints for drug susceptibilities by MODS averaged 13 days (7-32), whilst that for BACTEC MGIT 960 was 10 days with a further 12 days to detect resistance. Therefore, a turnaround period of 22 days was needed for DST by BACTEC MGIT 960, compared to 13 days for MODS. There were differences in correlation levels between the two methods, as determined by their kappa values. (4) Conclusion: The MODS assay was found to be less costly, more user-friendly, and still able to be conveniently used at health centers located in rural areas known to be endemic for TB, particularly in Ghana.
| S-EPMC7151611 | biostudies-literature
Project description:Microscopic [corrected] Observation Drug Susceptibility (MODS) has been shown to be an effective and rapid technique for early diagnosis of tuberculosis (TB). Thus far only a limited number of studies evaluating MODS have been performed in children and in extra-pulmonary tuberculosis. This study aims to assess relative accuracy and time to positive culture of MODS for TB diagnosis in children admitted to a general pediatric hospital in Vietnam.Specimens from children with suspected TB were tested by smear, MODS and Lowenstein-Jensen agar (LJ). 1129 samples from 705 children were analyzed, including sputum (n=59), gastric aspirate (n=775), CSF (n=148), pleural fluid (n=33), BAL (n=41), tracheal fluid (n=45), other (n=28). 113 TB cases were defined based on the "clinical diagnosis" (confirmed and probable groups) as the reference standard, in which 26% (n=30) were diagnosed as extra-pulmonary TB. Analysis by patient shows that the overall sensitivity and specificity of smear, LJ and MODS against "clinical diagnosis" was 8.8% and 100%, 38.9% and 100%, 46% and 99.5% respectively with MODS significantly more sensitive than LJ culture (P=0.02). When analyzed by sample type, the sensitivity of MODS was significantly higher than LJ for gastric aspirates (P=0.004). The time to detection was also significantly shorter for MODS than LJ (7 days versus 32 days, P<0.001).MODS [corrected] is a sensitive and rapid culture technique for detecting TB in children. As MODS culture can be performed at a BSL2 facility and is inexpensive, it can therefore be recommended as a routine test for children with symptoms suggestive of TB in resource-limited settings.
| S-EPMC3762843 | biostudies-literature
Project description:New diagnostic tools are urgently needed to interrupt the transmission of tuberculosis and multidrug-resistant tuberculosis. Rapid, sensitive detection of tuberculosis and multidrug-resistant tuberculosis in sputum has been demonstrated in proof-of-principle studies of the microscopic-observation drug-susceptibility (MODS) assay, in which broth cultures are examined microscopically to detect characteristic growth.In an operational setting in Peru, we investigated the performance of the MODS assay for culture and drug-susceptibility testing in three target groups: unselected patients with suspected tuberculosis, prescreened patients at high risk for tuberculosis or multidrug-resistant tuberculosis, and unselected hospitalized patients infected with the human immunodeficiency virus. We compared the MODS assay head-to-head with two reference methods: automated mycobacterial culture and culture on Löwenstein-Jensen medium with the proportion method.Of 3760 sputum samples, 401 (10.7%) yielded cultures positive for Mycobacterium tuberculosis. Sensitivity of detection was 97.8% for MODS culture, 89.0% for automated mycobacterial culture, and 84.0% for Löwenstein-Jensen culture (P<0.001); the median time to culture positivity was 7 days, 13 days, and 26 days, respectively (P<0.001), and the median time to the results of susceptibility tests was 7 days, 22 days, and 68 days, respectively. The incremental benefit of a second MODS culture was minimal, particularly in patients at high risk for tuberculosis or multidrug-resistant tuberculosis. Agreement between MODS and the reference standard for susceptibility was 100% for rifampin, 97% for isoniazid, 99% for rifampin and isoniazid (combined results for multidrug resistance), 95% for ethambutol, and 92% for streptomycin (kappa values, 1.0, 0.89, 0.93, 0.71, and 0.72, respectively).A single MODS culture of a sputum sample offers more rapid and sensitive detection of tuberculosis and multidrug-resistant tuberculosis than the existing gold-standard methods used.
| S-EPMC1780278 | biostudies-literature
Project description:Active tuberculosis (TB) must be excluded before initiating isoniazid preventive therapy (IPT) in persons infected with human immunodeficiency virus (HIV), but currently used screening strategies have poor sensitivity and specificity and high patient attrition rates. Liquid TB culture is now recommended for the detection of Mycobacterium tuberculosis in individuals suspected of having TB. This study compared the efficacy, effectiveness, and speed of the microscopic observation drug susceptibility (MODS) assay with currently used strategies for TB screening before IPT in HIV-infected persons.A total of 471 HIV-infected IPT candidates at 3 hospitals in Lima, Peru, were enrolled in a prospective comparison of TB screening strategies, including laboratory, clinical, and radiographic assessments.Of 435 patients who provided 2 sputum samples, M. tuberculosis was detected in 27 (6.2%) by MODS culture, 22 (5.1%) by Lowenstein-Jensen culture, and 7 (1.6%) by smear. Of patients with any positive microbiological test result, a MODS culture was positive in 96% by 14 days and 100% by 21 days. The MODS culture simultaneously detected multidrug-resistant TB in 2 patients. Screening strategies involving combinations of clinical assessment, chest radiograph, and sputum smear were less effective than 2 liquid TB cultures in accurately diagnosing and excluding TB (P<.01). Screening strategies that included nonculture tests had poor sensitivity and specificity.MODS culture identified and reliably excluded cases of pulmonary TB more accurately than other screening strategies, while providing results significantly faster than Lowenstein-Jensen culture. Streamlining of the ruling out of TB through the use of liquid culture-based strategies could help facilitate the massive up-scaling of IPT required to reduce HIV and TB morbidity and mortality.
| S-EPMC2947458 | biostudies-literature
Project description:Although pyrazinamide (PZA) is a key component of first- and second-line tuberculosis treatment regimens, there is no gold standard to determine PZA resistance. Approximately 50% of multidrug-resistant tuberculosis (MDR-TB) and over 90% of extensively drug-resistant tuberculosis (XDR-TB) strains are also PZA resistant. pncA sequencing is the endorsed test to evaluate PZA susceptibility. However, molecular methods have limitations for their wide application. In this study, we standardized and evaluated a new method, MODS-Wayne, to determine PZA resistance. MODS-Wayne is based on the detection of pyrazinoic acid, the hydrolysis product of PZA, directly in the supernatant of sputum cultures by detecting a color change following the addition of 10% ferrous ammonium sulfate. Using a PZA concentration of 800 µg/ml, sensitivity and specificity were evaluated at three different periods of incubation (reading 1, reading 2, and reading 3) using a composite reference standard (MGIT-PZA, pncA sequencing, and the classic Wayne test). MODS-Wayne was able to detect PZA resistance, with a sensitivity and specificity of 92.7% and 99.3%, respectively, at reading 3. MODS-Wayne had an agreement of 93.8% and a kappa index of 0.79 compared to the classic Wayne test, an agreement of 95.3% and kappa index of 0.86 compared to MGIT-PZA, and an agreement of 96.9% and kappa index of 0.90 compared to pncA sequencing. In conclusion, MODS-Wayne is a simple, fast, accurate, and inexpensive approach to detect PZA resistance, making this an attractive assay especially for low-resource countries, where TB is a major public health problem.
| S-EPMC6355525 | biostudies-literature
Project description:The emergence of multi- and extensively drug-resistant tuberculosis is a significant impediment to the control of this disease because treatment becomes more complex and costly. Reliable and timely drug susceptibility testing is critical to ensure that patients receive effective treatment and become noninfectious. Molecular methods can provide accurate and rapid drug susceptibility results. We used DNA sequencing to detect resistance to the first-line antituberculosis drugs isoniazid (INH), rifampin (RIF), pyrazinamide (PZA), and ethambutol (EMB) and the second-line drugs amikacin (AMK), capreomycin (CAP), kanamycin (KAN), ciprofloxacin (CIP), and ofloxacin (OFX). Nine loci were sequenced: rpoB (for resistance to RIF), katG and inhA (INH), pncA (PZA), embB (EMB), gyrA (CIP and OFX), and rrs, eis, and tlyA (KAN, AMK, and CAP). A total of 314 clinical Mycobacterium tuberculosis complex isolates representing a variety of antibiotic resistance patterns, genotypes, and geographical origins were analyzed. The molecular data were compared to the phenotypic data and the accuracy values were calculated. Sensitivity and specificity values for the first-line drug loci were 97.1% and 93.6% for rpoB, 85.4% and 100% for katG, 16.5% and 100% for inhA, 90.6% and 100% for katG and inhA together, 84.6% and 85.8% for pncA, and 78.6% and 93.1% for embB. The values for the second-line drugs were also calculated. The size and scope of this study, in numbers of loci and isolates examined, and the phenotypic diversity of those isolates support the use of DNA sequencing to detect drug resistance in the M. tuberculosis complex. Further, the results can be used to design diagnostic tests utilizing other mutation detection technologies.
| S-EPMC3088277 | biostudies-literature
Project description:For Mycobacterium tuberculosis, phenotypic methods for drug susceptibility testing of second-line drugs are poorly standardized and technically challenging. The Sensititre MYCOTB MIC plate (MYCOTB) is a microtiter plate containing lyophilized antibiotics and configured for determination of MICs to first- and second-line antituberculosis drugs. To evaluate the performance of MYCOTB for M. tuberculosis drug susceptibility testing using the Middlebrook 7H10 agar proportion method (APM) as the comparator, we conducted a two-site study using archived M. tuberculosis isolates from Uganda and the Republic of Korea. Thawed isolates were subcultured, and dilutions were inoculated into MYCOTB wells and onto 7H10 agar. MYCOTB results were read at days 7, 10, 14, and 21; APM results were read at 21 days. A total of 222 isolates provided results on both platforms. By APM, 106/222 (47.7%) of isolates were resistant to at least isoniazid and rifampin. Agreement between MYCOTB and APM with respect to susceptibility or resistance was ≥92% for 7 of 12 drugs when a strict definition was used and ≥96% for 10 of 12 drugs when agreement was defined by allowing a ± one-well range of dilutions around the APM critical concentration. For ethambutol, agreement was 80% to 81%. For moxifloxacin, agreement was 83% to 85%; incorporating existing DNA sequencing information for discrepant analysis raised agreement to 91% to 96%. For MYCOTB, the median time to plate interpretation was 10 days and interreader agreement was ≥95% for all drugs. MYCOTB provided reliable results for M. tuberculosis susceptibility testing of first- and second-line drugs except ethambutol, and results were available sooner than those determined by APM.
| S-EPMC3910714 | biostudies-literature
Project description:Conventional phenotypic drug susceptibility testing (DST) methods for Mycobacterium tuberculosis are laborious and very time-consuming. Early detection of drug-resistant tuberculosis (TB) is essential for prevention and control of TB transmission. We have developed a pyrosequencing method for simultaneous detection of mutations associated with resistance to rifampin, isoniazid, ethambutol, amikacin, kanamycin, capreomycin, and ofloxacin. Seven pyrosequencing assays were optimized for following loci: rpoB, katG, embB, rrs, gyrA, and the promoter regions of inhA and eis. The molecular method was evaluated on a panel of 290 clinical isolates of M. tuberculosis. In comparison to phenotypic DST, the pyrosequencing method demonstrated high specificity (100%) and sensitivity (94.6%) for detection of multidrug-resistant M. tuberculosis as well as high specificity (99.3%) and sensitivity (86.9%) for detection of extensively drug-resistant M. tuberculosis. The short turnaround time combined with multilocus sequencing of several isolates in parallel makes pyrosequencing an attractive method for drug resistance screening in M. tuberculosis.
| S-EPMC3372151 | biostudies-literature
Project description:The global rise of drug resistant tuberculosis has highlighted the need for improved diagnostic technologies that provide rapid and reliable drug resistance results. Here, we develop and validate a whole genome sequencing (WGS)-based test for identification of mycobacterium tuberculosis complex (MTB) drug resistance to rifampin, isoniazid, pyrazinamide, ethambutol, and streptomycin. Through comparative analysis of drug resistance results from WGS-based testing and phenotypic drug susceptibility testing (DST) of 38 clinical MTB isolates from patients receiving care in Los Angeles, CA, we found an overall concordance between methods of 97.4% with equivalent performance across culture media. Critically, prospective analysis of 11 isolates showed that WGS-based testing provides results an average of 36 days faster than phenotypic culture-based methods. We showcase the additional benefits of WGS data by investigating a suspected laboratory contamination event and using phylogenetic analysis to search for cryptic local transmission, finding no evidence of community spread amongst our patient population in the past six years. WGS-based testing for MTB drug resistance has the potential to greatly improve diagnosis of drug resistant MTB by accelerating turnaround time while maintaining accuracy and providing additional benefits for infection control, lab safety, and public health applications.
| S-EPMC10609454 | biostudies-literature
Project description:BackgroundThe steady rise in the spread of multidrug-resistant tuberculosis (MDR-TB) and extensively drug-resistant tuberculosis (XDR-TB) requires rapid and reliable methods to identify resistant strains. The current molecular methods to detect MTB resistance to second-line drugs either do not cover an extended spectrum of mutations to be identified or are not easily implemented in clinical laboratories. A rapid molecular technique for the detection of resistance to second-line drugs in M. tuberculosis has been developed using hybridisation analysis on microarrays.MethodsThe method allows the identification of mutations within the gyrA and gyrB genes responsible for fluoroquinolones resistance and mutations within the rrs gene and the eis promoter region associated with the resistance to injectable aminoglycosides and a cyclic peptide, capreomycin. The method was tested on 65 M. tuberculosis clinical isolates with different resistance spectra that were characterised by their resistance to ofloxacin, levofloxacin, moxifloxacin, kanamycin and capreomycin. Also, a total of 61 clinical specimens of various origin (e.g., sputum, bronchioalveolar lavage) were tested.ResultsThe sensitivity and specificity of the method in the detection of resistance to fluoroquinolones were 98% and 100%, respectively, 97% and 94% for kanamycin, and 100% and 94% for capreomycin. The analytical sensitivity of the method was approximately 300 genome copies per assay. The diagnostic sensitivity of the assay ranging from 67% to 100%, depending on the smear grade, and the method is preferable for analysis of smear-positive specimens.ConclusionsThe combined use of the developed microarray test and the previously described microarray-based test for the detection of rifampin and isoniazid resistance allows the simultaneous identification of the causative agents of MDR and XDR and the detection of their resistance profiles in a single day.
| S-EPMC3671172 | biostudies-literature