Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Data on modeling of UV/Na₂S₂O₈/FeS₂ process in amoxicillin removal using Box-Behnken methodology.

ABSTRACT: Among the pharmaceutical compounds, antibiotics have been paid specific consideration, due to their acute and chronic toxic effects on organisms. Amoxicillin (AMX) is used widely for treatment of bacterial infections. About 80% of amoxicillin excreted unchanged and enters the aquatic environment through different routes including disposal of municipal wastewaters, hospital wastewaters and farm wastewaters. In this study degradation of amoxicillin by UV/Na₂S₂O₈/FeS₂ process was evaluated. According to the results, the R-squared and adjusted R-squared were 0.9877 and 0.9828, respectively. The AMX removal efficiency was 93% at optimum conditions. Thus, UV/Na₂S₂O₈/FeS₂ process is a useful process for amoxicillin removal.

SUBMITTER: Kalantary RR

PROVIDER: S-EPMC6141797 | biostudies-literature | 2018 Aug

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Data on modeling of UV/Na2S2O8/FeS2 process in amoxicillin removal using Box-Behnken methodology.

Kalantary Roshanak Rezaei RR Rahmatinia Massuomeh M Moradi Masoud M

Data in brief 20180702

Among the pharmaceutical compounds, antibiotics have been paid specific consideration, due to their acute and chronic toxic effects on organisms. Amoxicillin (AMX) is used widely for treatment of bacterial infections. About 80% of amoxicillin excreted unchanged and enters the aquatic environment through different routes including disposal of municipal wastewaters, hospital wastewaters and farm wastewaters. In this study degradation of amoxicillin by UV/Na2S2O8/Fe ...[more]

PMID: 30246081

Similar Datasets

Optimization by Box-Behnken design for environmental contaminants removal using magnetic nanocomposite.

Project description:In this study, a CoO-Fe2O3/SiO2/TiO2 (CIST) nanocomposite was synthesized and utilized as an adsorbent to remove methylene blue (MB), malachite green (MG), and copper (Cu) from aqueous environments. The synthesized nanocomposite was characterized using field emission scanning electron microscopy (FE-SEM), Fourier-transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), and X-ray diffraction (XRD). Input parameters included pH (3-10), contact time (10-30 min), adsorbent amount (0.01-0.03 g), and pollutant concentration (20-60 mg L-1). The effects of these parameters on the removal process efficiency were modeled and optimized using the response surface methodology (RSM) based on the Box-Behnken design (BBD). The RSM-BBD method demonstrated the capability to develop a second-degree polynomial model with high validity (R2 ˃ 0.99) for the removal process. The optimization results using the RSM-BBD method revealed a removal efficiency of 98.01%, 93.06%, and 88.26% for MB, MG, and Cu, respectively, under optimal conditions. These conditions were a pH of 6, contact time of 10 min, adsorbent amount of 0.025 g, and concentration of 20 mg L-1. The synthesized adsorbent was recovered through five consecutive adsorption-desorption cycles using hydrochloric acid. The results showed an approximately 12% reduction from the first to the seventh cycle. Also, MB, MG, and Cu removal from real water samples in optimal conditions was achieved in the range of 81.69-98.18%. This study demonstrates the potential use of CIST nanocomposite as an accessible and reusable option for removing MB, MG, and Cu pollutants from aquatic environments.

| S-EPMC10960869 | biostudies-literature

Hierarchical Nanoflowers of MgFe2O4, Bentonite and B-,P- Co-Doped Graphene Oxide as Adsorbent and Photocatalyst: Optimization of Parameters by Box-Behnken Methodology.

Project description:In the present study, nanocomposites having hierarchical nanoflowers (HNFs) -like morphology were synthesized by ultra-sonication approach. HNFs were ternary composite of MgFe2O4 and bentonite with boron-, phosphorous- co-doped graphene oxide (BPGO). The HNFs were fully characterized using different analytical tools viz. X-ray photoelectron spectroscopy, scanning electron microscopy, energy dispersion spectroscopy, transmission electron microscopy, X-ray diffraction, vibrating sample magnetometry and Mössbauer analysis. Transmission electron micrographs showed that chiffon-like BPGO nanosheets were wrapped on the MgFe2O4-bentonite surface, resulting in a porous flower-like morphology. The red-shift in XPS binding energies of HNFs as compared to MgFe2O4-bentoniteand BPGO revealed the presence of strong interactions between the two materials. Box-Behnken statistical methodology was employed to optimize adsorptive and photocatalytic parameters using Pb(II) and malathion as model pollutants, respectively. HNFs exhibited excellent adsorption ability for Pb(II) ions, with the Langmuir adsorption capacity of 654 mg g-1 at optimized pH 6.0 and 96% photocatalytic degradation of malathion at pH 9.0 as compared to MgFe2O4-bentonite and BPGO. Results obtained in this study clearly indicate that HNFs are promising nanocomposite for the removal of inorganic and organic contaminants from the aqueous solutions.

| S-EPMC9455985 | biostudies-literature

Tailoring magnetic Sn-MOFs for efficient amoxicillin antibiotic removal through process optimization.

Project description:This study investigated the efficacy of magnetic Sn metal-organic frameworks (MSn-MOFs) in removing the insecticide amoxicillin (AMX) from aqueous solutions. Our thorough experimental investigation showed that MSn-MOFs were an incredibly effective adsorbent for removing AMX. Several methods were used to characterize the material. BET investigation of the data displayed a significant surface area of 880 m2 g-1 and a strong magnetic force of 89.26 emu g-1. To identify the point of zero charge, surface characterization was carried out and the value was 7.5. This shows that the adsorbent carries a positive and negative charge below and above this position, respectively. Moreover, the impact of pH on adsorption equilibrium was explored. The results of kinetic models to explore the adsorption of AMX on MSn-MOFs supported the pseudo-second-order, and the adsorption complied well with the Langmuir isotherm. The results revealed that the overall adsorption mechanism may entail chemisorption via an endothermic spontaneous process with MSn-MOFs. The precise modes by which MSn-MOFs and AMX interacted may involve pore filling, H-bonding, π-π interaction, or electrostatic interaction. Determining the nature of this interaction is essential in understanding the adsorption behavior of the MOFs and optimize the adsorbent design for real-world applications. The use of the MSn-MOF adsorbent provides a straightforward yet efficient method for the filtration of water and treatment of industrial effluents. The results showed 2.75 mmol g-1 as the maximum capacity for adsorption at pH = 6. Additional tests were conducted to assess the adsorbent regeneration, and even after more than six cycles, the results demonstrated a high level of efficiency. The adsorption results were enhanced by the application of the Box-Behnken design.

| S-EPMC10865462 | biostudies-literature

Evaluation of biomass pretreatment to optimize process factors for different organic acids via Box-Behnken RSM method.

Project description:Biomass, as renewable energy source, is of importance to investigate to extend the conversion yield by microorganism. Because of lignocellulosic structure, biomass must be pretreated with a process, frequently inorganic acid has to be used with a problem of hazardous byproducts. Organic acid pretreatment is an efficient alternative to be investigated. Sugar beet pulp, as an agro-industrial residue of microorganism, can be utilized by pretreatment, which is usually a costly process. Pretreatment with organic acids creates a great opportunity to convert the process into more economic and effective. Moreover, pressure conditions significantly increase the yield of biodegradable sugar content. In this study, different organic acids of maleic, fumaric, oxalic, and acetic acid pretreatment was investigated to pretreatment of sugar beet pulp, which came vast amount from factories, under pressure and non-pressure conditions via Box-Behnken method to estimate optimum point of acid ratio (1, 3, 5%), time (10, 27.5, 45 min), and solid ratio factors (3, 6.5, 10%) for highest degradation. Results were also evaluated economically. As a result of the experiments, it was observed that acetic acid gave the best result with 409.16 g/L total sugar concentration than the other organic acids. The highest TS concentration of maleic, oxalic, and fumaric acid were 97.26, 97.85, and 91.37 g/L, respectively, under pressure. According to economical evaluation, owing to lower market price and highest TS formation yield, pretreatment cost of acetic acid pretreatment was found averagely 1.51 $/gTS under pressure conditions.Supplementary informationThe online version contains supplementary material available at 10.1007/s10163-021-01276-7.

| S-EPMC8295973 | biostudies-literature

Effective Lipid Extraction from Fat Balls Using Liquefied Dimethyl Ether: Process Optimization with a Box-Behnken Design.

Project description:In recent years, lipids reused from urban wastewater materials have come to prominence as possible raw materials for biodiesel production. The present work investigated liquefied dimethyl ether (DME) for the lipid extraction of fat balls from sewage pumping stations. A response surface methodology (RSM) based on a Box-Behnken design (BBD) was utilized to optimize DME extraction parameters (sample size, velocity of liquefied DME, and DME/sample ratio). The maximum lipid yield was 65.2% under optimal DME extraction conditions (sample size 1 mm, velocity of liquefied DME 3.3 m/h, and DME/sample ratio 80 mL/g). Under the optimum conditions, the DME technique exhibited higher lipid recovery than that of mechanical shaking extraction (49.0%) or Soxhlet extraction (62.0%). The extracted lipids were converted into biodiesel, resulting in an approximately 35.2-46.2% biodiesel yield. Furthermore, the fatty acid methyl ester composition of the extracted lipids was characterized. These significant findings highlight the promising potential of fat balls as sustainable biodiesel feedstocks and provide valuable insight that will aid the development of better technology for lipid extraction.

| S-EPMC11325427 | biostudies-literature

Tolmetin Sodium Fast Dissolving Tablets for Rheumatoid Arthritis Treatment: Preparation and Optimization Using Box-Behnken Design and Response Surface Methodology.

Project description:Tolmetin sodium (TLM) is a non-steroidal anti-inflammatory drug (NSAIDs). TLM is used to treat inflammation, skeletal muscle injuries, and discomfort associated with bone disorders. Because of the delayed absorption from the gastro intestinal tract (GIT), the currently available TLM dosage forms have a rather protracted start to the effect, according to pharmacokinetic studies. The aim of this study was to create a combination for TLM fast dissolving tablets (TLM-FDT) that would boost the drug's bioavailability by increasing pre-gastric absorption. The TLM-FDTs were developed using a Box-Behnken experimental design with varied doses of crospovidone (CP), croscarmellose sodium (CCS) as super-disintegrants, and camphor as a sublimating agent. In addition, the current study used response surface approach to explore the influence of various formulation and process factors on tablet qualities in order to verify an optimized TLM-FDTs formulation. The optimized TLM-FDTs formula was subsequently evaluated for its in vivo anti-inflammatory activity. TLM-FDTs have good friability, disintegration time, drug release, and wetting time, as well as fast disintegration and dissolution behavior. Significant increase in drug bioavailability and reliable anti-inflammatory efficacy were also observed, as evidenced by considerable reductions in paw thickness in rats following carrageenan-induced rat paw edema. For optimizing and analyzing the effect of super-disintegrants and sublimating agents in the TLM-FDTs formula, the three-factor, three-level full factorial design is a suitable tool. TLM-FDTs are a possible drug delivery system for enhancing TLM bioavailability and could be used to treat rheumatoid arthritis.

| S-EPMC9027483 | biostudies-literature

Reactive Extraction of Malic Acid using Trioctylamine in 1-Decanol: Equilibrium Studies by Response Surface Methodology Using Box Behnken Optimization Technique.

Project description:Reactive extraction is a significant technique employed for the removal of organic acids such as carboxylic acid which are usually present in low concentrations in aqueous solutions. This technique was explored by applying Response Surface Methodology (RSM) in process parameter optimization for malic acid recovery from aqueous streams using Trioctylamine as extractant and 1-decanol as organic diluent. Malic acid, a C4 dicarboxylic acid has a wide variety of applications in the polymer, food, chemical and pharmaceutical industries. The optimization of the response function: extraction efficiency was systematically carried out using three process parameters for reactive extraction: temperature, initial malic acid concentration and extractant (Trioctylamine) composition. Response Surface Methodology in combination with Box-Behnken design involving seventeen experimental runs was employed for malic acid reactive extraction in this study. A statistical second-order polynomial predicted an extraction efficiency of 97.53%. The optimum conditions of the process variables were found to be: temperature: 304.73 K, acid concentration: 0.25 kmol/m3, Trioctylamine composition: 23.54% (v/v). Under these optimum conditions, the experimental response of extraction efficiency of 93.25% was obtained. The experimental results obtained was in close conformity with the predicted values by numerical optimization using Response Surface Methodology. These findings can pave the way for the reactive separation process design for recovery of carboxylic acids from dilute aqueous waste streams as well as a fermentation broth.

| S-EPMC7016146 | biostudies-literature

Optimization of Crude Oil and PAHs Degradation by Stenotrophomonas rhizophila KX082814 Strain through Response Surface Methodology Using Box-Behnken Design.

Project description:The present paper describes the process optimization study for crude oil degradation which is a continuation of our earlier work on hydrocarbon degradation study of the isolate Stenotrophomonas rhizophila (PM-1) with GenBank accession number KX082814. Response Surface Methodology with Box-Behnken Design was used to optimize the process wherein temperature, pH, salinity, and inoculum size (at three levels) were used as independent variables and Total Petroleum Hydrocarbon, Biological Oxygen Demand, and Chemical Oxygen Demand of crude oil and PAHs as dependent variables (response). The statistical analysis, via ANOVA, showed coefficient of determination R2 as 0.7678 with statistically significant P value 0.0163 fitting in second-order quadratic regression model for crude oil removal. The predicted optimum parameters, namely, temperature, pH, salinity, and inoculum size, were found to be 32.5°C, 9, 12.5, and 12.5 mL, respectively. At this optimum condition, the observed and predicted PAHs and crude oil removal were found to be 71.82% and 79.53% in validation experiments, respectively. The % TPH results correlate with GC/MS studies, BOD, COD, and TPC. The validation of numerical optimization was done through GC/MS studies and % removal of crude oil.

| S-EPMC5225391 | biostudies-literature

Effective Adsorption and Removal of Doxorubicin from Aqueous Solutions Using Mesostructured Silica Nanospheres: Box-Behnken Design Optimization and Adsorption Performance Evaluation.

Project description:The aim of this study is to evaluate the efficacy of mesoporous silica nanospheres as an adsorbent to remove doxorubicin (DOX) from aqueous solution. The surface and structural properties of mesoporous silica nanospheres were investigated using BET, SEM, XRD, TEM, ζ potential, and point of zero charge analysis. To optimize DOX removal from aqueous solution, a Box-Behnken surface statistical design (BBD) with four times factors, four levels, and response surface modeling (RSM) was used. A high amount of adsorptivity from DOX (804.84 mg/g) was successfully done under the following conditions: mesoporous silica nanospheres dose = 0.02 g/25 mL; pH = 6; shaking speed = 200 rpm; and adsorption time = 100 min. The study of isotherms demonstrated how well the Langmuir equation and the experimental data matched. According to thermodynamic characteristics, the adsorption of DOX on mesoporous silica nanospheres was endothermic and spontaneous. The increase in solution temperature also aided in the removal of DOX. The kinetic study showed that the model suited the pseudo-second-order. The suggested adsorption method could recycle mesoporous silica nanospheres five times, with a modest reduction in its ability for adsorption. The most important feature of our adsorbent is that it can be recycled five times without losing its efficiency.

| S-EPMC10116628 | biostudies-literature

Pd(II)-Imprinted Chitosan Adsorbent for Selective Adsorption of Pd(II): Optimizing the Imprinting Process through Box-Behnken Experimental Design.

Project description:The ion/molecular imprinting technique is an efficient method for developing materials with high adsorption selectivity. However, it is still difficult to obtain an imprinted adsorbent with desirably high selectivity when the preparation processes are not well designed and optimized. In this present work, a chitosan-based ion-imprinted adsorbent was optimally prepared through Box-Behnken experimental design to achieve desirably high selectivity for Pd anions (PdCl4 2-) from aqueous solutions with high acidity. The dosage of epichlorohydrin (ECH) used in the first and second steps of cross-linking as well as the pH of the imprinting reaction medium is likely one of the key factors affecting the selectivity of the synthesized ion-imprinted chitosan adsorbent, which were selected as factors in a three-level factorial Box-Behnken design. As a result, the effects of these three factors on Pd(II) selectivity were able to be described by using a second-order polynomial model with a high regression coefficient (R 2; 0.996). The obtained optimal conditions via the response surface methodology were 0.10% (v/v) of first cross-linking ECH, an imprinting pH of 1.0, and 1.00% of second cross-linking ECH. Competitive adsorption was performed to investigate the selectivities of the ion-imprinted chitosan adsorbents prepared under the optimal conditions. The selectivity coefficient of Pd(II) versus Pt(IV) (βPd/Pt) of the Pd(II)-imprinted adsorbent was 115.83, much greater than that of the chitosan adsorbent without imprinting and various reported selective adsorbents. Therefore, the Box-Behnken design can be a useful method for optimizing the synthesis of ion-imprinted adsorbents with desirably high adsorptive selectivity for precious metals.

| S-EPMC8158805 | biostudies-literature