Dataset Information

Impact of uniaxial tensile fatigue on the evolution of microscopic and mesoscopic structure of carbon black filled natural rubber.

ABSTRACT: This investigation addresses the evolution of the microscopic and mesoscopic structures distribution, and micro-defects of carbon black (CB) filled natural rubber (NR) under uniaxial tensile condition during the fatigue process. NR was filled with three different grades of CB in order to understand the impact of the structural degree and specific surface areas of CB and fatigue degree on the Payne effect. It was found that the Payne effect was initially suppressed and then enhanced by increasing the degree of fatigue. The decrease of the storage modulus in the low strain area was attributed to the CB network destruction and the breakdown of the matrix cross-linking network in the early fatigue stage. However, by further increasing the degree of fatigue, the spatial rearrangement of CB aggregates with the orientation of molecular chains between adjacent CB aggregates will results in mechanical reinforcement before the appearance of micro-defects. Moreover, it has been demonstrated that the structural degree of CB has a stronger impact on the mesoscopic structures than the specific surface area of CB during the tensile fatigue process.

SUBMITTER: Sun C

PROVIDER: S-EPMC6408415 | biostudies-literature | 2019 Feb

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Impact of uniaxial tensile fatigue on the evolution of microscopic and mesoscopic structure of carbon black filled natural rubber.

Sun Chong C Du Zhongjin Z Nagarajan Selvaraj S Zhao Hongying H Wen Shipeng S Zhao Suhe S Zhang Ping P Zhang Liqun L

Royal Society open science 20190213 2

This investigation addresses the evolution of the microscopic and mesoscopic structures distribution, and micro-defects of carbon black (CB) filled natural rubber (NR) under uniaxial tensile condition during the fatigue process. NR was filled with three different grades of CB in order to understand the impact of the structural degree and specific surface areas of CB and fatigue degree on the Payne effect. It was found that the Payne effect was initially suppressed and then enhanced by increasing ...[more]

PMID: 30891299

Similar Datasets

Project description:The influence of carbon black (CB) structure and surface area on key rubber properties such as monotonic stress-strain, cyclic stress-strain, and dynamic mechanical behaviors are investigated in this paper. Natural rubber compounds containing eight different CBs were examined at equivalent particulate volume fractions. The CBs varied in their surface area and structure properties according to a wide experimental design space, allowing robust correlations to the experimental data sets to be extracted. Carbon black structure plays a dominant role in defining the monotonic stress-strain properties (e.g., secant moduli) of the compounds. In line with the previous literature, this is primarily due to strain amplification and occluded rubber mechanisms. For cyclic stress-strain properties, which include the Mullins effect and cyclic softening, the observed mechanical hysteresis is strongly correlated with carbon black structure, which implies that hysteretic energy dissipation at medium to large strain values is isolated in the rubber matrix and arises due to matrix overstrain effects. Under small to medium dynamic strain conditions, classical strain dependence of viscoelastic moduli is observed (the Payne effect), the magnitude of which varies dramatically and systematically depending on the colloidal properties of the CB. At low strain amplitudes, both CB structure and surface area are positively correlated to the complex moduli. Beyond ~2% strain amplitude the effect of surface area vanishes, while structure plays an increasing and eventually dominant role in defining the complex modulus. This transition in colloidal correlations reflects the transition in stiffening mechanisms from flexing of rigid percolated particle networks at low strains to strain amplification at medium to high strains. By rescaling the dynamic mechanical data sets to peak dynamic stress and peak strain energy density, the influence of CB colloidal properties on compound hysteresis under strain, stress, and strain energy density control can be estimated. This has considerable significance for materials selection in rubber product development.

Dataset Information

Impact of uniaxial tensile fatigue on the evolution of microscopic and mesoscopic structure of carbon black filled natural rubber.

Publications

Impact of uniaxial tensile fatigue on the evolution of microscopic and mesoscopic structure of carbon black filled natural rubber.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets