Project description:Several interpretations of recurring slope lineae (RSL) have related RSL to the potential presence of transient liquid water on Mars. Such probable signs of liquid water have implications for Mars exploration in terms of rover safety, planetary protection during rover operations, and the current habitability of the planet. Mawrth Vallis has always been a prime target to be considered for Mars rover missions due to its rich mineralogy. Most recently, Mawrth Vallis was one of the two final candidates selected by the European Space Agency as a landing site for the ExoMars 2020 mission. Therefore, all surface features and landforms in Mawrth Vallis that may be of special interest in terms of scientific goals, rover safety, and operations must be scrutinised to better assess it for future Mars missions. Here, we report on the initial detection of RSL candidates in two craters of Mawrth Vallis. The new sightings were made outside of established RSL regions and further prompt the inclusion of a new geographical region within the RSL candidate group. Our inferences on the RSL candidates are based on several morphological and geophysical evidences and analogies: (i) the dimensions of the RSL candidates are consistent with confirmed mid-latitude RSL; (ii) albedo and thermal inertia values are comparable to those of other mid-latitude RSL sites; and (iii) features are found in a summer season image and on the steep and warmest slopes. These results denote the plausible presence of transient liquid brines close to the previously proposed landing ellipse of the ExoMars rover, rendering this site particularly relevant to the search of life. Further investigations of Mawrth Vallis carried out at higher spatial and temporal resolutions are needed to identify more of such features at local scales to maximize the scientific return from the future Mars rovers, to prevent probable biological contamination during rover operations, to evade damage to rover components as brines can be highly corrosive, and to quantify the ability of the regolith at mid-latitudes to capture atmospheric water which is relevant for in-situ-resource utilization.
Project description:Mars has several different types of slope feature that resemble aqueous flows. However, current cold, dry conditions are inimical to liquid water, resulting in uncertainty about its role in modern surface processes. Dark slope streaks were among the first distinctive young slope features to be identified on Mars and the first with activity seen in orbital images. They form markings on steep slopes that can persist for decades, and the role of water in their formation remains under debate. Here I analyze the geomorphic features of new slope streaks using high-resolution orbital images. Comparison of before-and-after images reveals how the streak formation process affects the surface and provides information about the cause. These observations demonstrate that slope streaks erode and deposit material in some instances. They also reveal that streaks can jump slopes and may be erosive very near their termini. These observations support a formation model where dark slope streaks form as ground-hugging, low-density avalanches of dry surface dust. Such streaks need not be treated as Special Regions for planetary protection.
Project description:Recurring Slope Lineae (RSL) on Mars have been enigmatic since their discovery; their behavior resembles a seeping liquid but sources of water remain puzzling. This work demonstrates that the properties of RSL are consistent with observed behaviors of Martian and terrestrial aeolian processes. Specifically, RSL are well-explained as flows of sand that remove a thin coating of dust. Observed RSL properties are supportive of or consistent with this model, which requires no liquid water or other exotic processes, but rather indicates seasonal aeolian behavior. These settings and behaviors resemble features observed by rovers and also explain the occurrence of many slope lineae on Mars that do not meet the strict definition of RSL. This indicates that RSL can be explained simply as aeolian features. Other processes may add complexities just as they could modify the behavior of any sand dune.
Project description:The scale of groundwater upwelling on Mars, as well as its relation to sedimentary systems, remains an ongoing debate. Several deep craters (basins) in the northern equatorial regions show compelling signs that large amounts of water once existed on Mars at a planet-wide scale. The presence of water-formed features, including fluvial Gilbert and sapping deltas fed by sapping valleys, constitute strong evidence of groundwater upwelling resulting in long term standing bodies of water inside the basins. Terrestrial field evidence shows that sapping valleys can occur in basalt bedrock and not only in unconsolidated sediments. A hypothesis that considers the elevation differences between the observed morphologies and the assumed basal groundwater level is presented and described as the "dike-confined water" model, already present on Earth and introduced for the first time in the Martian geological literature. Only the deepest basins considered in this study, those with bases deeper than -4000 m in elevation below the Mars datum, intercepted the water-saturated zone and exhibit evidence of groundwater fluctuations. The discovery of these groundwater discharge sites on a planet-wide scale strongly suggests a link between the putative Martian ocean and various configurations of sedimentary deposits that were formed as a result of groundwater fluctuations during the Hesperian period. This newly recognized evidence of water-formed features significantly increases the chance that biosignatures could be buried in the sediment. These deep basins (groundwater-fed lakes) will be of interest to future exploration missions as they might provide evidence of geological conditions suitable for life.
Project description:Repeat, high-resolution imaging of dunes within the Martian north polar erg have shown that these dune slopes are very active, with alcoves forming along the dune brink each Mars year. In some areas, a few hundred cubic metres of downslope sand movement have been observed, sometimes moving the dune brink 'backwards'. Based on morphological and activity-timing similarities of these north polar features to southern dune gullies, identifying the processes forming these features is likely to have relevance for understanding the general evolution/modification of dune gullies. To determine alcove-formation model constraints, we have surveyed seven dune fields, each over 1-4 Mars winters. Consistent with earlier reports, we found that alcove-formation activity occurs during the autumn-winter seasons, before or while the stable seasonal frost layer is deposited. We propose a new model in which alcove formation occurs during the autumn, and springtime sublimation activity then enhances the feature. Summertime winds blow sand into the new alcoves, erasing small alcoves over a few Mars years. Based on the observed rate of alcove erasure, we estimated the effective aeolian sand transport flux. From this, we proposed that alcove formation may account for 2-20% of the total sand movement within these dune fields.
Project description:In explaining extensive evidence for past liquid water, the debate on whether Mars was primarily warm and wet or cold and arid 4 billion years (Ga) ago has continued for decades. The Sun's luminosity was ~30% lower 4 Ga ago; thus, most martian climate models struggle to elevate the mean surface temperature past the melting point of water. Basal melting of ice sheets may help resolve that paradox. We modeled the thermophysical evolution of ice and estimate the geothermal heat flux required to produce meltwater on a cold, arid Mars. We then analyzed geophysical and geochemical data, showing that basal melting would have been feasible on Mars 4 Ga ago. If Mars were warm and wet 4 Ga ago, then the geothermal flux would have even sustained hydrothermal activity. Regardless of the actual nature of the ancient martian climate, the subsurface would have been the most habitable region on Mars.
Project description:Heavy seismic damage tends to occur in slopes when groundwater is present. The main objectives of this paper are to determine the dynamic response and failure mode of sandy slope subjected simultaneously to seismic forces and variable groundwater conditions. This paper applies the finite element method, which is a fast and efficient design tool in modern engineering analysis, to evaluate dynamic response of the slope subjected simultaneously to seismic forces and variable groundwater conditions. Shaking table test is conducted to analyze the failure mode and verify the accuracy of the finite element method results. The research results show that dynamic response values of the slope have different variation rules under near and far field earthquakes. And the damage location and pattern of the slope are different in varying groundwater conditions. The destruction starts at the top of the slope when the slope is in no groundwater, which shows that the slope appears obvious whipping effect under the earthquake. The destruction starts at the toe of the slope when the slope is in the high groundwater levels. Meanwhile, the top of the slope shows obvious seismic subsidence phenomenon after earthquake. Furthermore, the existence of the groundwater has a certain effect of damping.
Project description:Occasional collapse failure is a typical occurrence during mine slope excavation processes. This study aimed to investigate the disaster law in the process of mining slope excavation, and further explore the optimal selection of excavation angle. Based on the systematic analysis of the residual sliding force and deformation response characteristics during slope excavation, the increment of the residual sliding force increases and the stability coefficient decreases with the increase in excavation depth. Additionally, a numerical model of the Jinchuan mining area in Jinchuan City, Gansu Province, China was created using the Midas-GTS finite element software. The influence of different excavation slope angles on slope stability was analyzed via numerical simulation under certain step slope height and width. The results show that the force and deformation of the slope were unfavorable to slope stability, and the slope stability coefficient would decrease gradually with the increase in slope angle. In addition, the optimal excavation angle combination ranges were determined as 62°~ 65°, 64°~ 67°, 67°~ 69°, 70°~ 71°, 73°, 75°~ 76°, 77°~ 80°considering the stability and maximum recovery. Therefore, the above research results verify the loading effect of mine slope excavation, and can serve as a reference for studies on the optimal range of excavation angles for the mine slope.