Dataset Information

Generalized Brewster Angle Effect in Thin-Film Optical Absorbers and Its Application for Graphene Hydrogen Sensing.

ABSTRACT: The generalized Brewster angle (GBA) is the incidence angle at polarization by reflection for p- or s-polarized light. Realizing an s-polarization Brewster effect requires a material with magnetic response, which is challenging at optical frequencies since the magnetic response of materials at these frequencies is extremely weak. Here, we experimentally realize the GBA effect in the visible using a thin-film absorber system consisting of a dielectric film on an absorbing substrate. Polarization by reflection is realized for both p- and s-polarized light at different angles of incidence and multiple wavelengths. We provide a theoretical framework for the generalized Brewster effect in thin-film light absorbers. We demonstrate hydrogen gas sensing using a single-layer graphene film transferred on a thin-film absorber at the GBA with ∼1 fg/mm² aerial mass sensitivity. The ultrahigh sensitivity stems from the strong phase sensitivity near the point of darkness, particularly at the GBA, and the strong light-matter interaction in planar nanocavities. These findings depart from the traditional domain of thin films as mere interference optical coatings and highlight its many potential applications including gas sensing and biosensing.

SUBMITTER: Sreekanth KV

PROVIDER: S-EPMC6646958 | biostudies-literature | 2019 Jul

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Generalized Brewster Angle Effect in Thin-Film Optical Absorbers and Its Application for Graphene Hydrogen Sensing.

Sreekanth Kandammathe Valiyaveedu KV ElKabbash Mohamed M Medwal Rohit R Zhang Jihua J Letsou Theodore T Strangi Giuseppe G Hinczewski Michael M Rawat Rajdeep S RS Guo Chunlei C Singh Ranjan R

ACS photonics 20190618 7

The generalized Brewster angle (GBA) is the incidence angle at polarization by reflection for p- or s-polarized light. Realizing an s-polarization Brewster effect requires a material with magnetic response, which is challenging at optical frequencies since the magnetic response of materials at these frequencies is extremely weak. Here, we experimentally realize the GBA effect in the visible using a thin-film absorber system consisting of a dielectric film on an absorbing substrate. Polarization ...[more]

PMID: 31355301

Similar Datasets

Project description:This paper studies the structural and optical properties of tantalum-iron-, tantalum-cobalt-, and tantalum-nickel-sputtered thin films both ex situ and while being exposed to various hydrogen pressures/concentrations, with a focus on optical hydrogen sensing applications. Optical hydrogen sensors require sensing materials that absorb hydrogen when exposed to a hydrogen-containing environment. In turn, the absorption of hydrogen causes a change in the optical properties that can be used to create a sensor. Here, we take tantalum as a starting material and alloy it with Fe, Co, or Ni with the aim to tune the optical hydrogen sensing properties. The rationale is that alloying with a smaller element would compress the unit cell, reduce the amount of hydrogen absorbed, and shift the pressure composition isotherm to higher pressures. X-ray diffraction shows that no lattice compression is realized for the crystalline Ta body-centered cubic phase when Ta is alloyed with Fe, Co, or Ni, but that phase segregation occurs where the crystalline body-centered cubic phase coexists with another phase, as for example an X-ray amorphous one or fine-grained intermetallic compounds. The fraction of this phase increases with increasing alloyant concentration up until the point that no more body-centered cubic phase is observed for 20% alloyant concentration. Neutron reflectometry indicates only a limited reduction of the hydrogen content with alloying. As such, the ability to tune the sensing performance of these materials by alloying with Fe, Co, and/or Ni is relatively small and less effective than substitution with previously studied Pd or Ru, which do allow for a tuning of the size of the unit cell, and consequently tunable hydrogen sensing properties. Despite this, optical transmission measurements show that a reversible, stable, and hysteresis-free optical response to hydrogen is achieved over a wide range of hydrogen pressures/concentrations for Ta-Fe, Ta-Co, or Ta-Ni alloys which would allow them to be used in optical hydrogen sensors.

Dataset Information

Generalized Brewster Angle Effect in Thin-Film Optical Absorbers and Its Application for Graphene Hydrogen Sensing.

Publications

Generalized Brewster Angle Effect in Thin-Film Optical Absorbers and Its Application for Graphene Hydrogen Sensing.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets