Dataset Information

Estimating the organic oxygen content of biochar.

ABSTRACT: The organic O content of biochar is useful for assessing biochar stability and reactivity. However, accurately determining the organic O content of biochar is difficult. Biochar contains both organic and inorganic forms of O, and some of the organic O is converted to inorganic O (e.g., newly formed carbonates) when samples are ashed. Here, we compare estimates of the O content for biochars produced from pure compounds (little or no ash), acid-washed biomass (little ash), and unwashed biomass (range of ash content). Novelty of this study includes a new method to predict organic O content of biochar using three easily measured biochar parameters- pyrolysis temperature, H/C molar ratio, and %biochar yield, and evidence indicating that the conventional difference method may substantially underestimate the organic O in biochar and adversely impact the accuracy of O:C ratios and van Krevelen plots. We also present evidence that acid washing removed 17% of the structural O from biochars and significantly changes O/C ratios. Environmental modelers are encouraged to use biochar H:C ratios.

SUBMITTER: Bakshi S

PROVIDER: S-EPMC7403298 | biostudies-literature | 2020 Aug

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Estimating the organic oxygen content of biochar.

Bakshi Santanu S Banik Chumki C Laird David A DA

Scientific reports 20200804 1

The organic O content of biochar is useful for assessing biochar stability and reactivity. However, accurately determining the organic O content of biochar is difficult. Biochar contains both organic and inorganic forms of O, and some of the organic O is converted to inorganic O (e.g., newly formed carbonates) when samples are ashed. Here, we compare estimates of the O content for biochars produced from pure compounds (little or no ash), acid-washed biomass (little ash), and unwashed biomass (ra ...[more]

PMID: 32753602

Similar Datasets

Project description:Biochar adsorbent can be produced in low-resource settings using local materials and simple pyrolysis technology, and it has shown promise for uptake of micropollutants (MPs) such as pesticides, pharmaceuticals, industrial compounds, and chemicals released from consumer goods present in water at ng/L to μg/L levels. Accordingly, the use of biochar in water treatment applications where granular activated carbon (GAC) is economically or logistically infeasible is gaining interest. Monitoring treatment systems for individual MPs require laboratory analytical techniques that are typically cost-prohibitive and impractical for low-resource settings. Therefore, identification of surrogate parameters(s) for adsorbent bed life that can be measured inexpensively and in the field is a high priority. Background dissolved organic matter (DOM) is ubiquitous in natural and anthropogenic waters at concentrations typically 1,000 to 100,000 that of MPs. Some constituents of DOM foul the adsorbent and reduce bed life for removal of target contaminants. Aromatic DOM foulants absorb ultraviolet light at a wavelength of 254 nm (UVA254). Because DOM fouling directly affects MP adsorption capacity and DOM is a bulk water parameter that can be quantified using relatively inexpensive and portable instruments, it could be exploited as a surrogate for monitoring biochar adsorber bed life under field conditions. The objective of this study was to quantify removal of MPs from waters containing different types and concentrations of background DOM (surface water, wastewater, dump leachate) and thus exhibiting different UVA254 breakthrough profiles in bench-scale column experiments. Breakthrough profiles of weakly to moderately adsorbing MPs, including herbicides, pharmaceuticals and personal care products, and perfluoroalkyl acids, were collected using biochars generated under different pyrolysis conditions and a commercial GAC as a performance benchmark. Optimal conditions for biochar water treatment include using biochar produced from wood at ≥850°C under slightly aerobic conditions, empty bed contact times of ≥30 min, and upstream treatment processes to reduce DOM. Relative UVA254 breakthrough (C/C 0) up to 0.6-0.9 corresponded to ≥90% MP removal for most MP-water combinations studied.

Dataset Information

Estimating the organic oxygen content of biochar.

Publications

Estimating the organic oxygen content of biochar.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets