Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Moth-eye Structured Polydimethylsiloxane Films for High-Efficiency Perovskite Solar Cells.

ABSTRACT: Large-area polydimethylsiloxane (PDMS) films with variably sized moth-eye structures were fabricated to improve the efficiency of perovskite solar cells. An approach that incorporated photolithography, bilayer PDMS deposition and replication was used in the fabrication process. By simply attaching the moth-eye PDMS films to the transparent substrates of perovskite solar cells, the optical properties of the devices could be tuned by changing the size of the moth-eye structures. The device with 300-nm moth-eye PDMS films greatly enhanced power conversion efficiency of ~ 21% due to the antireflective effect of the moth-eye structure. Furthermore, beautiful coloration was observed on the 1000-nm moth-eye PDMS films through optical interference caused by the diffraction grating effect. Our results imply that moth-eye PDMS films can greatly enhance the efficiency of perovskite solar cells and building-integrated photovoltaics.

SUBMITTER: Kim MC

PROVIDER: S-EPMC7770823 | biostudies-literature | 2019 Jun

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Moth-eye Structured Polydimethylsiloxane Films for High-Efficiency Perovskite Solar Cells.

Kim Min-Cheol MC Jang Segeun S Choi Jiwoo J Kang Seong Min SM Choi Mansoo M

Nano-micro letters 20190625 1

Large-area polydimethylsiloxane (PDMS) films with variably sized moth-eye structures were fabricated to improve the efficiency of perovskite solar cells. An approach that incorporated photolithography, bilayer PDMS deposition and replication was used in the fabrication process. By simply attaching the moth-eye PDMS films to the transparent substrates of perovskite solar cells, the optical properties of the devices could be tuned by changing the size of the moth-eye structures. The device with 30 ...[more]

PMID: 34137987

Similar Datasets

Meniscus-assisted solution printing of large-grained perovskite films for high-efficiency solar cells.

Project description:Control over morphology and crystallinity of metal halide perovskite films is of key importance to enable high-performance optoelectronics. However, this remains particularly challenging for solution-printed devices due to the complex crystallization kinetics of semiconductor materials within dynamic flow of inks. Here we report a simple yet effective meniscus-assisted solution printing (MASP) strategy to yield large-grained dense perovskite film with good crystallization and preferred orientation. Intriguingly, the outward convective flow triggered by fast solvent evaporation at the edge of the meniscus ink imparts the transport of perovskite solutes, thus facilitating the growth of micrometre-scale perovskite grains. The growth kinetics of perovskite crystals is scrutinized by in situ optical microscopy tracking to understand the crystallization mechanism. The perovskite films produced by MASP exhibit excellent optoelectronic properties with efficiencies approaching 20% in planar perovskite solar cells. This robust MASP strategy may in principle be easily extended to craft other solution-printed perovskite-based optoelectronics.

| S-EPMC5504348 | biostudies-literature

Planar Metasurfaces Enable High-Efficiency Colored Perovskite Solar Cells.

Project description:The achievement of perfect light absorption in ultrathin semiconductor materials is not only a long-standing goal, but also a critical challenge for solar energy applications, and thus requires a redesigned strategy. Here, a general strategy is demonstrated both theoretically and experimentally to create a planar metasurface absorber comprising a 1D ultrathin planar semiconductor film (replacing the 2D array of subwavelength elements in classical metasurfaces), a transparent spacer, and a metallic back reflector. Guided by derived formulisms, a new type of macroscopic planar metasurface absorber is experimentally demonstrated with light near-perfectly and exclusively absorbed by the ultrathin semiconductor film. To demonstrate the power and simplicity of this strategy, a prototype of a planar metasurface solar cell is experimentally demonstrated. Furthermore, the device model predicts that a colored planar metasurface perovskite solar cell can maintain 75% of the efficiency of its black counterpart despite the use of a perovskite film that is one order of magnitude thinner. The displayed cell colors have high purities comparable to those of state-of-the-art color filters, and are insensitive to viewing angles up to 60°. The general theoretical framework in conjunction with experimental demonstrations lays the foundation for designing miniaturized, planar, and multifunctional solar cells and optoelectronic devices.

| S-EPMC6193155 | biostudies-literature

Denatured M13 Bacteriophage-Templated Perovskite Solar Cells Exhibiting High Efficiency.

Project description:The M13 bacteriophage, a nature-inspired environmentally friendly biomaterial, is used as a perovskite crystal growth template and a grain boundary passivator in perovskite solar cells. The amino groups and carboxyl groups of amino acids on the M13 bacteriophage surface function as Lewis bases, interacting with the perovskite materials. The M13 bacteriophage-added perovskite films show a larger grain size and reduced trap-sites compared with the reference perovskite films. In addition, the existence of the M13 bacteriophage induces light scattering effect, which enhances the light absorption particularly in the long-wavelength region around 825 nm. Both the passivation effect of the M13 bacteriophage coordinating to the perovskite defect sites and the light scattering effect intensify when the M13 virus-added perovskite precursor solution is heated at 90 °C prior to the film formation. Heating the solution denatures the M13 bacteriophage by breaking their inter- and intra-molecular bondings. The denatured M13 bacteriophage-added perovskite solar cells exhibit an efficiency of 20.1% while the reference devices give an efficiency of 17.8%. The great improvement in efficiency comes from all of the three photovoltaic parameters, namely short-circuit current, open-circuit voltage, and fill factor, which correspond to the perovskite grain size, trap-site passivation, and charge transport, respectively.

| S-EPMC7578877 | biostudies-literature

High-efficiency robust perovskite solar cells on ultrathin flexible substrates.

Project description:Wide applications of personal consumer electronics have triggered tremendous need for portable power sources featuring light-weight and mechanical flexibility. Perovskite solar cells offer a compelling combination of low-cost and high device performance. Here we demonstrate high-performance planar heterojunction perovskite solar cells constructed on highly flexible and ultrathin silver-mesh/conducting polymer substrates. The device performance is comparable to that of their counterparts on rigid glass/indium tin oxide substrates, reaching a power conversion efficiency of 14.0%, while the specific power (the ratio of power to device weight) reaches 1.96 kW kg(-1), given the fact that the device is constructed on a 57-μm-thick polyethylene terephthalate based substrate. The flexible device also demonstrates excellent robustness against mechanical deformation, retaining >95% of its original efficiency after 5,000 times fully bending. Our results confirmed that perovskite thin films are fully compatible with our flexible substrates, and are thus promising for future applications in flexible and bendable solar cells.

| S-EPMC4729901 | biostudies-literature

Performance Enhancement of All-Inorganic Carbon-Based CsPbIBr2 Perovskite Solar Cells Using a Moth-Eye Anti-Reflector.

Project description:All-inorganic carbon-based CsPbIBr2 perovskite solar cells (PSCs) have attracted increasing interest due to the low cost and the balance between bandgap and stability. However, the relatively narrow light absorption range (300 to 600 nm) limited the further improvement of short-circuit current density (JSC) and power conversion efficiency (PCE) of PSCs. Considering the inevitable reflectance loss (~10%) at air/glass interface, we prepared the moth-eye anti-reflector by ultraviolet nanoimprint technology and achieved an average reflectance as low as 5.15%. By attaching the anti-reflector on the glass side of PSCs, the JSC was promoted by 9.4% from 10.89 mA/cm2 to 11.91 mA/cm2, which is the highest among PSCs with a structure of glass/FTO/c-TiO2/CsPbIBr2/Carbon, and the PCE was enhanced by 9.9% from 9.17% to 10.08%. The results demonstrated that the larger JSC induced by the optical reflectance modulation of moth-eye anti-reflector was responsible for the improved PCE. Simultaneously, this moth-eye anti-reflector can withstand a high temperature up to 200 °C, and perform efficiently at a wide range of incident angles from 40° to 90° and under various light intensities. This work is helpful to further improve the performance of CsPbIBr2 PSCs by optical modulation and boost the possible application of wide-range-wavelength anti-reflector in single and multi-junction solar cells.

| S-EPMC8538339 | biostudies-literature

Hierarchically structured Zn2SnO4 nanobeads for high-efficiency dye-sensitized solar cells.

Project description:We developed a unique strategy for fabricating hierarchically structured (nanoparticles-in-beads) Zn2SnO4 beads (ZTO-Bs), which were then used to produce ternary metal oxide-based dye-sensitized solar cells (DSSCs). DSSCs were fabricated using the ZTO-Bs as the photoelectrodes and highly absorbable organic dyes as the sensitizers. The DSSCs based on the ZTO-Bs and the organic dyes (SJ-E1 and SJ-ET1) exhibited the highest performance ever reported for DSSCs with ternary metal oxide-based photoelectrodes. The optimized DSSCs exhibited a power conversion efficiency of 6.3% (V(OC) of 0.71 V, J(SC) of 12.2 mA cm(-2), FF of 0.72), which was much higher than that for DSSCs with conventional ZTO-NPs-based photoelectrodes or those based on the popular ruthenium-based dye, N719. The unique morphology of the ZTO-Bs allowed for improvements in dye absorption, light scattering, electrolyte penetration, and the charge recombination lifetime, while the organic dyes resulted in high molar absorbability.

| S-EPMC4258648 | biostudies-literature

High efficiency perovskite quantum dot solar cells with charge separating heterostructure.

Project description:Metal halide perovskite semiconductors possess outstanding characteristics for optoelectronic applications including but not limited to photovoltaics. Low-dimensional and nanostructured motifs impart added functionality which can be exploited further. Moreover, wider cation composition tunability and tunable surface ligand properties of colloidal quantum dot (QD) perovskites now enable unprecedented device architectures which differ from thin-film perovskites fabricated from solvated molecular precursors. Here, using layer-by-layer deposition of perovskite QDs, we demonstrate solar cells with abrupt compositional changes throughout the perovskite film. We utilize this ability to abruptly control composition to create an internal heterojunction that facilitates charge separation at the internal interface leading to improved photocarrier harvesting. We show how the photovoltaic performance depends upon the heterojunction position, as well as the composition of each component, and we describe an architecture that greatly improves the performance of perovskite QD photovoltaics.

| S-EPMC6599010 | biostudies-literature

Stable High-Efficiency Two-Dimensional Perovskite Solar Cells Via Bromine Incorporation.

Project description:Two-dimensional (2D) organic-inorganic perovskites as one of the most important photovoltaic material used in solar cells have attracted remarkable attention. These 2D perovskites exhibit superior environmental stability and wide tunability of their optoelectronic properties. However, their photovoltaic performance is far behind those of traditional three-dimensional (3D) perovskites. In this work, we demonstrate the power conversion efficiency (PCE) of 2D perovskite solar cells (PVSCs) is greatly improved from 3.01% for initial to 12.19% by the incorporation of PbBr2. The enhanced efficiency is attributed to superior surface quality, enhanced crystallinity, and the resulting reduced trap-state density. Furthermore, PbBr2 incorporated devices without encapsulation show excellent humidity stability, illumination stability, and thermal stability. This work provides a universal and viable avenue toward efficient and stable 2D PVSCs.

| S-EPMC7530156 | biostudies-literature

High-Performance Simple-Structured Planar Heterojunction Perovskite Solar Cells Achieved by Precursor Optimization.

Project description:Planar perovskite solar cells (PSCs) with perovskite and [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) heterojunction have attracted much interest because they can be fabricated by a low-temperature process and exhibit high power conversion efficiency (PCE). Various compositional engineering and interface engineering approaches have been applied to produce high-performance PSC devices. In this study, we found that high-quality lead halide crystal precursor has a significant effect on the perovskite film quality and it could enhance perovskite film light absorption, reduce crystal defects, and suppress charge recombination, resulting in enhanced device performance (from 8.9 to 15.0% for CH3NH3PbI3 and from 14.2 to 18.0% for MA0.7FA0.3PbI3-x Cl x ). Moreover, electron and hole interlayer free devices were achieved by using high-quality PbI2 crystals and the devices exhibited a high PCE of 13.6 and 10.4% for glass and flexible substrates, respectively. This is important for simplifying the perovskite solar cell fabrication process without complex interface engineering involved, especially for printed PSCs.

| S-EPMC6644478 | biostudies-literature

A general approach to high-efficiency perovskite solar cells by any antisolvent.

Project description:Deposition of perovskite films by antisolvent engineering is a highly common method employed in perovskite photovoltaics research. Herein, we report on a general method that allows for the fabrication of highly efficient perovskite solar cells by any antisolvent via manipulation of the antisolvent application rate. Through detailed structural, compositional, and microstructural characterization of perovskite layers fabricated by 14 different antisolvents, we identify two key factors that influence the quality of the perovskite layer: the solubility of the organic precursors in the antisolvent and its miscibility with the host solvent(s) of the perovskite precursor solution, which combine to produce rate-dependent behavior during the antisolvent application step. Leveraging this, we produce devices with power conversion efficiencies (PCEs) that exceed 21% using a wide range of antisolvents. Moreover, we demonstrate that employing the optimal antisolvent application procedure allows for highly efficient solar cells to be fabricated from a broad range of precursor stoichiometries.

| S-EPMC7994557 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data