Dataset Information

Assessing the Influence of Dyes Physico-Chemical Properties on Incorporation and Release Kinetics in Silk Fibroin Matrices.

ABSTRACT: Silk fibroin (SF) is a promising and versatile biodegradable protein for biomedical applications. This study aimed to develop a prolonged release device by incorporating SF microparticles containing dyes into SF hydrogels. The influence of dyes on incorporation and release kinetics in SF based devices were evaluated regarding their hydrophilicity, molar mass, and cationic/anionic character. Hydrophobic and cationic dyes presented high encapsulation efficiency, probably related to electrostatic and hydrophobic interactions with SF. The addition of SF microparticles in SF hydrogels was an effective method to prolong the release, increasing the release time by 10-fold.

SUBMITTER: Tomoda BT

PROVIDER: S-EPMC7961930 | biostudies-literature | 2021 Mar

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Assessing the Influence of Dyes Physico-Chemical Properties on Incorporation and Release Kinetics in Silk Fibroin Matrices.

Tomoda Bruno Thorihara BT Pacheco Murilo Santos MS Abranches Yasmin Broso YB Viganó Juliane J Perrechil Fabiana F De Moraes Mariana Agostini MA

Polymers 20210305 5

Silk fibroin (SF) is a promising and versatile biodegradable protein for biomedical applications. This study aimed to develop a prolonged release device by incorporating SF microparticles containing dyes into SF hydrogels. The influence of dyes on incorporation and release kinetics in SF based devices were evaluated regarding their hydrophilicity, molar mass, and cationic/anionic character. Hydrophobic and cationic dyes presented high encapsulation efficiency, probably related to electrostatic a ...[more]

PMID: 33807825

Similar Datasets

Project description:The dissolution of Bombyx mori silk fibroin (SF) films in formic acid (FA) for the preparation of electrospinning dopes is widely exploited to produce electrospun SF scaffolds. The SILKBridge® nerve conduit is an example of medical device having in its wall structure an electrospun component produced from an FA spinning dope. Though highly volatile, residual FA remains trapped into the bulk of the SF nanofibers. The purpose of this work is to investigate the type and strength of the interaction between FA and SF in electrospun mats, to quantify its amount and to evaluate its possible toxicological impact on human health. The presence of residual FA in SF mats was detected by FTIR and Raman spectroscopy (new carbonyl peak at about 1,725 cm-1) and by solid state NMR, which revealed a new carbonyl signal at about 164.3 ppm, attributed to FA by isotopic 13C substitution. Changes occurred also in the spectral ranges of hydroxylated amino acids (Ser and Thr), demonstrating that FA interacted with SF by forming formyl esters. The total amount of FA was determined by HS-GC/MS analysis and accounted for 247 ± 20 μmol/g. The greatest part was present as formyl ester, a small part (about 3%) as free FA. Approximately 17% of the 1,500 μmol/g of hydroxy amino acids (Ser and Thr) theoretically available were involved in the formation of formyl esters. Treatment with alkali (Na2CO3) succeeded to remove the greatest part of FA, but not all. Alkali-treated electrospun SF mats underwent morphological, physical, and mechanical changes. The average diameter of the fibers increased from about 440 nm to about 480 nm, the mat shrunk, became stiffer (the modulus increased from about 5.5 MPa to about 7 MPa), and lost elasticity (the strain decreased from about 1 mm/mm to about 0.8 mm/mm). Biocompatibility studies with human adult dermal fibroblasts did not show significant difference in cell proliferation (313 ± 18 and 309 ± 23 cells/mm2 for untreated and alkali-treated SF mat, respectively) and metabolic activity. An in-depth evaluation of the possible toxicological impact of residual FA was made using the SILKBridge® nerve conduit as case study, following the provisions of the ISO 10993-1 standard. The Potential Patient Daily Intake, calculated from the total amount of FA determined by HS-GC/MS, was 2.4 mg/day and the Tolerable Exposure level was set to 35.4 mg/day. This allowed to obtain a value of the Margin of Safety of 15, indicating that the amount of FA left on SF mats after electrospinning does not raise concerns for human health.

Project description:Essential oils (EOs) are naturally occurring volatile aromatic compounds extracted from different parts of plants. They are made up of components like terpenes, phenols, etc., and are chemically unstable and susceptible to oxidative deterioration, leading to reduced shelf-life and overall degradation of the product. Encapsulation of EOs in a matrix can prevent degradation of the active ingredient and improve the shelf-life. In this paper, we report encapsulation of Dhavana oil (Artemisia pellen) in a modified starch matrix using a spray-drying technique. Physico-chemical properties of neat and encapsulated Dhavana oil were studied. We selected two powder bases: CaCO3 and TALC and, loaded neat and encapsulated Dhavana oil in it, studied their stability and interaction with the base matrices at 3 °C, 22 °C and 45 °C up to 2 months under closed conditions and one week at 22 °C and 45 °C under open condition. Thermal degradation pattern was studied for neat and encapsulated Dhavana oil and modified starch. Release of primary active component of neat and encapsulated Dhavana oil from the base matrices was evaluated with GCMS. Stability study and release mechanism were elucidated to understand the release pattern in different base powders under similar conditions. Retention of hydroxydhavanone was found to be better in TALC than CaCO3, and therefore, the former can be considered a suitable base matrix for developing a stable powder formulation with an optimum release of the oil. Dhavana oil is known for its anti-microbial activity, and hence, neat and encapsulated Dhavana oil was tested on different bacterial and fungal strains. The encapsulated oil depicted good anti-microbial efficacy against various bacterial and fungal strains, which is a step forward for developing anti-microbial formulations. Thus, the reported work will provide helpful information on cosmetic formulation and, therefore, be useful for perfumery, food, and cosmetic industries.

Dataset Information

Assessing the Influence of Dyes Physico-Chemical Properties on Incorporation and Release Kinetics in Silk Fibroin Matrices.

Publications

Assessing the Influence of Dyes Physico-Chemical Properties on Incorporation and Release Kinetics in Silk Fibroin Matrices.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets