Dataset Information

Consumer-Grade Inkjet Printer for Versatile and Precise Chemical Deposition.

ABSTRACT: Two simple, mechanical modifications are introduced to a consumer-grade inkjet printer to greatly increase its applicability. First, roller isolation bars are added to unlock multiple prints on the same substrate without smearing. This enables printing on a diverse set of substrates (rigid, elastic, liquid, granular, and sticky). Second, spring loadings are added to increase the print precision up to 50-fold, which facilitates alignment to a pre-patterned substrate or between successive prints. Utilizing the expanded substrate compatibility and the increased print precision, we explore tunable loading of drug combinations into microdevices. This loading method has promising applications within point-of-care personalized medication. Furthermore, we show how inkjet printers with array-type printheads (in our case, 6 x 90 nozzles) allow for quasi-simultaneous loading of reactants into microfluidic systems. The ability to do a quasi-simultaneous introduction of chemicals may be particularly useful for studies of rapidly reacting systems of three or more reactants, where premature introduction can shift the initial conditions from the intended. We believe that our modifications to an affordable system will inspire researchers to explore the possibilities of inkjet printing even further.

SUBMITTER: Mandsberg NK

PROVIDER: S-EPMC7992151 | biostudies-literature | 2021 Mar

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Consumer-Grade Inkjet Printer for Versatile and Precise Chemical Deposition.

Mandsberg Nikolaj Kofoed NK Højgaard Jesper J Joshi Shreya Suhas SS Nielsen Line Hagner LH Boisen Anja A Hwu En Te ET

ACS omega 20210309 11

Two simple, mechanical modifications are introduced to a consumer-grade inkjet printer to greatly increase its applicability. First, roller isolation bars are added to unlock multiple prints on the same substrate without smearing. This enables printing on a diverse set of substrates (rigid, elastic, liquid, granular, and sticky). Second, spring loadings are added to increase the print precision up to 50-fold, which facilitates alignment to a pre-patterned substrate or between successive prints. ...[more]

PMID: 33778290

Similar Datasets

Project description:Printing devices are known to emit chemicals into the indoor atmosphere. Understanding factors that influence release of chemical contaminants from printers is necessary to develop effective exposure assessment and control strategies. In this study, a desktop fused deposition modeling (FDM) 3-dimensional (3-D) printer using acrylonitrile butadiene styrene (ABS) or polylactic acid (PLA) filaments and two monochrome laser printers were evaluated in a 0.5 m3 chamber. During printing, chamber air was monitored for vapors using a real-time photoionization detector (results expressed as isobutylene equivalents) to measure total volatile organic compound (TVOC) concentrations, evacuated canisters to identify specific VOCs by off-line gas chromatography-mass spectrometry (GC-MS) analysis, and liquid bubblers to identify carbonyl compounds by GC-MS. Airborne particles were collected on filters for off-line analysis using scanning electron microscopy with an energy dispersive x-ray detector to identify elemental constituents. For 3-D printing, TVOC emission rates were influenced by a printer malfunction, filament type, and to a lesser extent, by filament color; however, rates were not influenced by the number of printer nozzles used or the manufacturer's provided cover. TVOC emission rates were significantly lower for the 3-D printer (49-3552 µg h-1) compared to the laser printers (5782-7735 µg h-1). A total of 14 VOCs were identified during 3-D printing that were not present during laser printing. 3-D printed objects continued to off-gas styrene, indicating potential for continued exposure after the print job is completed. Carbonyl reaction products were likely formed from emissions of the 3-D printer, including 4-oxopentanal. Ultrafine particles generated by the 3-D printer using ABS and a laser printer contained chromium. Consideration of the factors that influenced the release of chemical contaminants (including known and suspected asthmagens such as styrene and 4-oxopentanal) from a FDM 3-D printer should be made when designing exposure assessment and control strategies.

Dataset Information

Consumer-Grade Inkjet Printer for Versatile and Precise Chemical Deposition.

Publications

Consumer-Grade Inkjet Printer for Versatile and Precise Chemical Deposition.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets