Dataset Information

Chloroaluminate Gel Electrolytes Prepared with Copolymers Based on Imidazolium Ionic Liquids and Deep Eutectic Solvent AlCl3:Urea.

ABSTRACT: Polymer gel electrolytes (PGEs) have been prepared with copolymers based on imidazolium ionic liquids and the deep eutectic mixture of AlCl3:urea (uralumina) as liquid electrolyte. The copolymers were synthesized by photopolymerization of vinylpirrolidone or methylmethacrylate with imidazolium bis (trifluoromethane sulfonyl) imide (TFSI) ionic liquid monomer and mixed in an increasing range of wt.% with uralumina. The rheology and electrochemical activity of PGEs were highly dependent on the molar ratio of charged groups and copolymer content. Structure of the PGEs was studied by FTIR and Raman spectroscopy and a correlation between interactions polymer/uralumina and changes in speciation of uralumina was established. Despite the low molecular weight of the copolymers, the resulting polymer electrolytes develop elastomeric character associated with the binding ionic species. Although there is room to improve the electrochemical activity, in this study these new gels provide sufficient electroactivity to make them feasible alternatives as electrolytes in secondary aluminum batteries.

SUBMITTER: Pablos JL

PROVIDER: S-EPMC8037023 | biostudies-literature | 2021 Mar

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Chloroaluminate Gel Electrolytes Prepared with Copolymers Based on Imidazolium Ionic Liquids and Deep Eutectic Solvent AlCl<sub>3</sub>:Urea.

Pablos Jesús L JL Tiemblo Pilar P Ellis Gary G Corrales Teresa T

Polymers 20210327 7

Polymer gel electrolytes (PGEs) have been prepared with copolymers based on imidazolium ionic liquids and the deep eutectic mixture of AlCl<sub>3</sub>:urea (uralumina) as liquid electrolyte. The copolymers were synthesized by photopolymerization of vinylpirrolidone or methylmethacrylate with imidazolium bis (trifluoromethane sulfonyl) imide (TFSI) ionic liquid monomer and mixed in an increasing range of wt.% with uralumina. The rheology and electrochemical activity of PGEs were highly dependent ...[more]

PMID: 33801632

Similar Datasets

Project description:Aluminum-based batteries are a promising alternative to lithium-ion as they are considered to be low-cost and more friendly to the environment. In addition, aluminum is abundant and evenly distributed across the globe. Many studies and Al battery prototypes use imidazolium chloroaluminate electrolytes because of their good rheological and electrochemical performance. However, these electrolytes are very expensive, and so cost is a barrier to industrial scale-up. A urea-based electrolyte, AlCl3:Urea, has been proposed as an alternative, but its performance is relatively poor because of its high viscosity and low conductivity. This type of electrolyte has become known as an ionic liquid analogue (ILA). In this contribution, we proposed two Lewis base salt precursors, namely, guanidine hydrochloride and acetamidine hydrochloride, as alternatives to the urea-based ILA. We present the study of three ILAs, AlCl3:Guanidine, AlCl3:Acetamidine, and AlCl3:Urea, examining their rheology, electrochemistry, NMR spectra, and coin-cell performance. The room temperature viscosities of both AlCl3:Guanidine (52.9 cP) and AlCl3:Acetamidine (76.0 cP) were significantly lower than those of the urea-based liquid (240.9 cP), and their conductivities were correspondingly higher. Cyclic voltammetry (CV) and linear sweep voltammetry (LSV) showed that all three electrolytes exhibit reversible deposition/dissolution of Al, but LSV indicated that AlCl3:Guanidine and AlCl3:Acetamidine ILAs have superior anodic stability compared to the AlCl3:Urea electrolyte, as evidenced by anodic potential limits of +2.23 V for both AlCl3:Guanidine and AlCl3:Acetamidine and +2.12 V for AlCl3:Urea. Coin-cell tests showed that both AlCl3:Guanidine and AlCl3:Acetamidine ILA exhibit a higher Coulombic efficiency (98 and 97%, respectively) than the AlCl3:Urea electrolyte system, which has an efficiency of 88% after 100 cycles at 60 mA g-1. Overall, we show that AlCl3:Guanidine and AlCl3:Acetamidine have superior performance when compared to AlCl3:Urea, while maintaining low economic cost. We consider these to be valuable alternative materials for Al-based battery systems, especially for commercial production.

Project description:At the core of the aluminum (Al) ion battery is the liquid electrolyte, which governs the underlying chemistry. Optimizing the rheological properties of the electrolyte is critical to advance the state of the art. In the present work, the chloroaluminate electrolyte is made by reacting AlCl3 with a recently reported acetamidinium chloride (Acet-Cl) salt in an effort to make a more performant liquid electrolyte. Using AlCl3:Acet-Cl as a model electrolyte, we build on our previous work, which established a new method for extracting the ionic conductivity from fitting voltammetric data, and in this contribution, we validate the method across a range of measurement parameters in addition to highlighting the model electrolytes' conductivity relative to current chloroaluminate liquids. Specifically, our method allows the extraction of both the ionic conductivity and voltammetric data from a single, simple, and routine measurement. To bring these results in the context of current methods, we compare our results to two independent standard conductivity measurement techniques. Several different measurement parameters (potential scan rate, potential excursion, temperature, and composition) are examined. We find that our novel method can resolve similar trends in conductivity to conventional methods, but typically, the values are a factor of two higher. The values from our method, on the other hand, agree closely with literature values reported elsewhere. Importantly, having now established the approach for our new method, we discuss the conductivity of AlCl3:Acet-Cl-based formulations. These electrolytes provide a significant improvement (5-10× higher) over electrolytes made from similar Lewis base salts (e.g., urea or acetamide). The Lewis base salt precursors have a low economic cost compared to state-of-the-art imidazolium-based salts and are non-toxic, which is advantageous for scale-up. Overall, this is a noteworthy step at designing cost-effective and performant liquid electrolytes for Al-ion battery applications.

Dataset Information

Chloroaluminate Gel Electrolytes Prepared with Copolymers Based on Imidazolium Ionic Liquids and Deep Eutectic Solvent AlCl3:Urea.

Publications

Chloroaluminate Gel Electrolytes Prepared with Copolymers Based on Imidazolium Ionic Liquids and Deep Eutectic Solvent AlCl<sub>3</sub>:Urea.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets