Dataset Information

Opportunities and challenges in reducing personal inhalation exposure to air pollution among electronic waste recovery workers in Ghana.

ABSTRACT:

Background

Informal sector electronic waste (e-waste) recovery produces toxic emissions resulting from burning e-waste to recover valuable metals.

Objectives

To identify high-risk worker groups by measuring relative levels of personal inhalation exposure to particulate matter (PM) of fine (≤2.5 µm) and coarse (2.5-10 µm) fractions (PM_2.5 and PM_2.5-10, respectively) across work activities among e-waste workers, and to assess how wind conditions modify levels of PM by activity and site location.

Methods

At the Agbogbloshie e-waste site, 170 partial-shift PM samples and time-activity data were collected from participants (N = 105) enrolled in the GeoHealth cohort study. Personal sampling included continuous measures of size-specific PM from the worker's breathing zone and time-activity derived from wearable cameras. Linear mixed models were used to estimate changes in personal PM_2.5 and PM_2.5-10 associated with activities and evaluate effect modification by wind conditions.

Results

Mean (±standard deviation) personal PM_2.5 and PM_2.5-10 concentrations were 80 (± 81) and 123 (± 139) µg m^-3 , respectively. The adjusted mean PM_2.5 concentration for burning e-waste was 88 µg m^-3 , a 28% increase above concentrations during non-recovery activities (such as eating). Transportation-related and burning activities were associated with the highest PM_2.5-10 concentrations. Frequent changes in wind direction were associated with higher PM_2.5 concentrations when burning, and high wind speeds with higher PM_2.5-10 concentrations when dismantling e-waste downwind of the burning zone.

SUBMITTER: Laskaris Z

PROVIDER: S-EPMC8046737 | biostudies-literature | 2021 May

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Opportunities and challenges in reducing personal inhalation exposure to air pollution among electronic waste recovery workers in Ghana.

Laskaris Zoey Z Batterman Stuart A SA Arko-Mensah John J Mukherjee Bhramar B Fobil Julius N JN O'Neill Marie S MS Robins Thomas G TG

American journal of industrial medicine 20210201 5

<h4>Background</h4>Informal sector electronic waste (e-waste) recovery produces toxic emissions resulting from burning e-waste to recover valuable metals.<h4>Objectives</h4>To identify high-risk worker groups by measuring relative levels of personal inhalation exposure to particulate matter (PM) of fine (≤2.5 µm) and coarse (2.5-10 µm) fractions (PM<sub>2.5</sub> and PM<sub>2.5-10,</sub> respectively) across work activities among e-waste workers, and to assess how wind conditions modify levels o ...[more]

PMID: 33522624

Similar Datasets

Project description:ObjectivesApproximately 2 billion workers globally are employed in informal settings, which are characterized by substantial risk from hazardous exposures and varying job tasks and schedules. Existing methods for identifying occupational hazards must be adapted for unregulated and challenging work environments. We designed and applied a method for objectively deriving time-activity patterns from wearable camera data and matched images with continuous measurements of personal inhalation exposure to size-specific particulate matter (PM) among workers at an informal electronic-waste (e-waste) recovery site.MethodsOne hundred and forty-two workers at the Agbogbloshie e-waste site in Accra, Ghana, wore sampling backpacks equipped with wearable cameras and real-time particle monitors during a total of 171 shifts. Self-reported recall of time-activity (30-min resolution) was collected during the end of shift interviews. Images (N = 35,588) and simultaneously measured PM2.5 were collected each minute and processed to identify activities established through worker interviews, observation, and existing literature. Descriptive statistics were generated for activity types, frequencies, and associated PM2.5 exposures. A kappa statistic measured agreement between self-reported and image-based time-activity data.ResultsBased on image-based time-activity patterns, workers primarily dismantled, sorted/loaded, burned, and transported e-waste materials for metal recovery with high variability in activity duration. Image-based and self-reported time-activity data had poor agreement (kappa = 0.17). Most measured exposures (90%) exceeded the World Health Organization (WHO) 24-h ambient PM2.5 target of 25 µg m-3. The average on-site PM2.5 was 81 µg m-3 (SD: 94). PM2.5 levels were highest during burning, sorting/loading and dismantling (203, 89, 83 µg m-3, respectively). PM2.5 exposure during long periods of non-work-related activities also exceeded the WHO standard in 88% of measured data.ConclusionsIn complex, informal work environments, wearable cameras can improve occupational exposure assessments and, in conjunction with monitoring equipment, identify activities associated with high exposures to workplace hazards by providing high-resolution time-activity data.

Project description:BackgroundAir pollution exposure increases cardiovascular morbidity and mortality and is a major global public health concern.ObjectivesWe investigated the benefits of reducing personal exposure to urban air pollution in patients with coronary heart disease.MethodsIn an open randomized crossover trial, 98 patients with coronary heart disease walked on a predefined route in central Beijing, China, under different conditions: once while using a highly efficient face mask, and once while not using the mask. Symptoms, exercise, personal air pollution exposure, blood pressure, heart rate, and 12-lead electrocardiography were monitored throughout the 24-hr study period.ResultsAmbient air pollutants were dominated by fine and ultrafine particulate matter (PM) that was present at high levels [74 μg/m³ for PM(2.5) (PM with aerodynamic diamater <2.5 µm)]. Consistent with traffic-derived sources, this PM contained organic carbon and polycyclic aromatic hydrocarbons and was highly oxidizing, generating large amounts of free radicals. The face mask was well tolerated, and its use was associated with decreased self-reported symptoms and reduced maximal ST segment depression (-142 vs. -156 μV, p = 0.046) over the 24-hr period. When the face mask was used during the prescribed walk, mean arterial pressure was lower (93 ± 10 vs. 96 ± 10 mmHg, p = 0.025) and heart rate variability increased (high-frequency power: 54 vs. 40 msec², p = 0.005; high-frequency normalized power: 23.5 vs. 20.5 msec, p = 0.001; root mean square successive differences: 16.7 vs. 14.8 msec, p = 0.007). However, mask use did not appear to influence heart rate or energy expenditure.ConclusionsReducing personal exposure to air pollution using a highly efficient face mask appeared to reduce symptoms and improve a range of cardiovascular health measures in patients with coronary heart disease. Such interventions to reduce personal exposure to PM air pollution have the potential to reduce the incidence of cardiovascular events in this highly susceptible population.

Project description:Among the different thermo-chemical recycling routes for plastic waste valorization, gasification is one of the most promising, converting plastic waste into syngas (H2+CO) and energy in the presence of an oxygen-rich gas. Plastic waste gasification is associated with many different complexities due to the multi-scale nature of the process, the feedstock complexity (mixed polyolefins with different contaminations), intricate reaction mechanisms, plastic properties (melting behavior and molecular weight distribution), and complex transport phenomena in a multi-phase flow system. Hence, creating a reliable model calls for an extensive understanding of the phenomena at all scales, and more advanced modeling approaches than those applied today are required. Indeed, modeling of plastic waste gasification (PWG) is still in its infancy today. Our review paper shows that the thermophysical properties are rarely properly defined. Challenges in this regard together with possible methodologies to decently define these properties have been elaborated. The complexities regarding the kinetic modeling of gasification are numerous, compared to, e.g., plastic waste pyrolysis, or coal and biomass gasification, which are elaborated in this work along with the possible solutions to overcome them. Moreover, transport limitations and phase transformations, which affect the apparent kinetics of the process, are not usually considered, while it is demonstrated in this review that they are crucial in the robust prediction of the outcome. Hence, possible approaches in implementing available models to consider these limitations are suggested. Finally, the reactor-scale phenomena of PWG, which are more intricate than the similar processes-due to the presence of molten plastic-are usually simplified to the gas-solid systems, which can result in unreliable modeling frameworks. In this regard, an opportunity lies in the increased computational power that helps improve the model's precision and allows us to include those complexities within the multi-scale PWG modeling. Using the more accurate modeling methodologies in combination with multi-scale modeling approaches will, in a decade, allow us to perform a rigorous optimization of the PWG process, improve existing and develop new gasifiers, and avoid fouling issues caused by tar.

Project description:The environmental cycling of mercury (Hg) can be affected by natural and anthropogenic perturbations. Of particular concern is how these disruptions increase mobilization of Hg from sites and alter the formation of monomethylmercury (MeHg), a bioaccumulative form of Hg for humans and wildlife. The scientific community has made significant advances in recent years in understanding the processes contributing to the risk of MeHg in the environment. The objective of this paper is to synthesize the scientific understanding of how Hg cycling in the aquatic environment is influenced by landscape perturbations at the local scale, perturbations that include watershed loadings, deforestation, reservoir and wetland creation, rice production, urbanization, mining and industrial point source pollution, and remediation. We focus on the major challenges associated with each type of alteration, as well as management opportunities that could lessen both MeHg levels in biota and exposure to humans. For example, our understanding of approximate response times to changes in Hg inputs from various sources or landscape alterations could lead to policies that prioritize the avoidance of certain activities in the most vulnerable systems and sequestration of Hg in deep soil and sediment pools. The remediation of Hg pollution from historical mining and other industries is shifting towards in situ technologies that could be less disruptive and less costly than conventional approaches. Contemporary artisanal gold mining has well-documented impacts with respect to Hg; however, significant social and political challenges remain in implementing effective policies to minimize Hg use. Much remains to be learned as we strive towards the meaningful application of our understanding for stakeholders, including communities living near Hg-polluted sites, environmental policy makers, and scientists and engineers tasked with developing watershed management solutions. Site-specific assessments of MeHg exposure risk will require new methods to predict the impacts of anthropogenic perturbations and an understanding of the complexity of Hg cycling at the local scale.

Dataset Information

Opportunities and challenges in reducing personal inhalation exposure to air pollution among electronic waste recovery workers in Ghana.

Background

Objectives

Methods

Results

Publications

Opportunities and challenges in reducing personal inhalation exposure to air pollution among electronic waste recovery workers in Ghana.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets