Dataset Information

Non-domestic wastewater treatment with fungal/bacterial consortium followed by Chlorella sp., and thermal conversion of the generated sludge.

ABSTRACT: Liquid waste from biological stains is considered non-domestic wastewater difficult to treat, generating high environmental impact. Therefore, the objective of this work was to carry out secondary and tertiary treatment of these effluents at a pilot scale, using a fungal/bacterial consortium followed by Chorella sp., for 15 days. In addition, to obtain an adsorbent material for Malachite Green dye removal, sludge generated in the plant and pine bark co-pyrolysis was performed. For microalgae isolation and selection of the Chlorophyceae class, Chlorococcales order, and Chorella sp. genus Winogradsky columns were employed. After 15 days of pilot plant treatment, removal percentages of 91 ± 2%, 90 ± 4% and 17 ± 2% were obtained for Colour Units, Chemical Oxygen Demand and Nitrates, respectively. Two types of class II biochar (BC₅₀₀ and BC₇₀₀) and one of class III (BC₃₀₀) were produced. The highest value for Fixed carbon (FC) was obtained at 300 °C (27.3 ± 3%), decreasing as the temperature increased by 25.9 ± 5% and 24.8 ± 2%, for BC₅₀₀ and BC₇₀₀, respectively. Biochar yield was 62.1 ± 3%, 46.3 ± 4% and 31.6 ± 3% for BC₃₀₀, BC₅₀₀ and BC₇₀₀, respectively. Finally, BC₅₀₀ and BC₇₀₀ biochar efficiently adsorbed Malachite Green obtaining qe values of 0.290 ± 0.032, 0.281 ± 0.015, 0.186 ± 0.009 and 0.191 ± 0.012 mg g^-1 at pH values of 4.0 and 8.0 ± 0.2, respectively. Pseudo-second order model demonstrated a chemical adsorption took place, which was influenced by pH.

Supplementary information

The online version contains supplementary material available at 10.1007/s13205-021-02780-1.

SUBMITTER: Cespedes-Bernal DN

PROVIDER: S-EPMC8058123 | biostudies-literature | 2021 May

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Non-domestic wastewater treatment with fungal/bacterial consortium followed by <i>Chlorella</i> sp., and thermal conversion of the generated sludge.

Céspedes-Bernal Diana N DN Mateus-Maldonado Juan F JF Rengel-Bustamante Jorge A JA Quintero-Duque María C MC Rivera-Hoyos Claudia M CM Poutou-Piñales Raúl A RA Díaz-Ariza Lucia A LA Castillo-Carvajal Laura C LC Páez-Morales Adriana I AI Pedroza-Rodríguez Aura M AM

3 Biotech 20210420 5

Liquid waste from biological stains is considered non-domestic wastewater difficult to treat, generating high environmental impact. Therefore, the objective of this work was to carry out secondary and tertiary treatment of these effluents at a pilot scale, using a fungal/bacterial consortium followed by <i>Chorella</i> sp., for 15 days. In addition, to obtain an adsorbent material for Malachite Green dye removal, sludge generated in the plant and pine bark co-pyrolysis was performed. For microal ...[more]

PMID: 33968572

Similar Datasets

Project description:Agroindustrial biomass residues are considered potential feedstocks for renewable fuels and chemical production through processes such as thermal conversion. In this regard, thermal conversion characteristics of molasses, a byproduct from sugar production, have not been investigated. In this study, thermal conversion properties of molasses at temperatures of 700-900 °C have been studied using a single-particle reactor. Fuel swelling, combustion times, CO gas yields and gasification reactivities, and NO emissions and release of K and Cl during combustion and gasification were the thermal conversion characteristics of the molasses studied. In addition, the melting behavior of molasses ash produced at 500 °C was assessed using FactSage thermodynamic modeling and differential scanning calorimetry-thermogravimetric analysis measurements. Results of the molasses thermal conversion properties were compared with those of vinasse and black liquor samples from the integrated sugar-ethanol mill and soda pulping of hardwood, respectively. The results show that the molasses droplets had the least swelling tendency and the longest combustion time in the temperature range used, suggesting a lower conversion rate of molasses in an industrial boiler than the vinasse and black liquor. Moreover, at temperatures relevant for industrial gasification processes, that is, ≥800 °C, the gasification rates of molasses were lower than those of the vinasse and black liquor, probably owing to the lower total concentration of catalytic alkali and alkaline earth metals in the molasses. The release of K and Cl to a high degree from molasses during combustion and gasification and the low melting temperature of molasses ash make it a challenging fuel to utilize using the current thermal conversion technologies. Nevertheless, a black liquor recovery boiler type with a simpler (or an oxidizing) lower furnace than that of a black liquor recovery boiler and an entrained flow gasifier of the type demonstrated for black liquor may be potential options for the production of energy and recovery of inorganic chemicals from molasses.