Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Hydrous Hydrazine Decomposition for Hydrogen Production Using of Ir/CeO2: Effect of Reaction Parameters on the Activity.

ABSTRACT: In the present work, an Ir/CeO2 catalyst was prepared by the deposition-precipitation method and tested in the decomposition of hydrazine hydrate to hydrogen, which is very important in the development of hydrogen storage materials for fuel cells. The catalyst was characterised using different techniques, i.e., X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), scanning electron microscopy (SEM) equipped with X-ray detector (EDX) and inductively coupled plasma-mass spectroscopy (ICP-MS). The effect of reaction conditions on the activity and selectivity of the material was evaluated in this study, modifying parameters such as temperature, the mass of the catalyst, stirring speed and concentration of base in order to find the optimal conditions of reaction, which allow performing the test in a kinetically limited regime.

SUBMITTER: Motta D

PROVIDER: S-EPMC8161091 | biostudies-literature | 2021 May

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Hydrous Hydrazine Decomposition for Hydrogen Production Using of Ir/CeO2: Effect of Reaction Parameters on the Activity.

Motta Davide D Barlocco Ilaria I Bellomi Silvio S Villa Alberto A Dimitratos Nikolaos N

Nanomaterials (Basel, Switzerland) 20210519 5

In the present work, an Ir/CeO2 catalyst was prepared by the deposition-precipitation method and tested in the decomposition of hydrazine hydrate to hydrogen, which is very important in the development of hydrogen storage materials for fuel cells. The catalyst was characterised using different techniques, i.e., X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), scanning electron microscopy (SEM) equipped with X-ray detector (EDX) and inductively coupled pl ...[more]

PMID: 34069534

Similar Datasets

Hunting for hydrogen: random structure searching and prediction of NMR parameters of hydrous wadsleyite.

Project description:The structural chemistry of materials containing low levels of nonstoichiometric hydrogen is difficult to determine, and producing structural models is challenging where hydrogen has no fixed crystallographic site. Here we demonstrate a computational approach employing ab initio random structure searching (AIRSS) to generate a series of candidate structures for hydrous wadsleyite (β-Mg2SiO4 with 1.6 wt% H2O), a high-pressure mineral proposed as a repository for water in the Earth's transition zone. Aligning with previous experimental work, we solely consider models with Mg3 (over Mg1, Mg2 or Si) vacancies. We adapt the AIRSS method by starting with anhydrous wadsleyite, removing a single Mg(2+) and randomly placing two H(+) in a unit cell model, generating 819 candidate structures. 103 geometries were then subjected to more accurate optimisation under periodic DFT. Using this approach, we find the most favourable hydration mechanism involves protonation of two O1 sites around the Mg3 vacancy. The formation of silanol groups on O3 or O4 sites (with loss of stable O1-H hydroxyls) coincides with an increase in total enthalpy. Importantly, the approach we employ allows observables such as NMR parameters to be computed for each structure. We consider hydrous wadsleyite (∼1.6 wt%) to be dominated by protonated O1 sites, with O3/O4-H silanol groups present as defects, a model that maps well onto experimental studies at higher levels of hydration (J. M. Griffin et al., Chem. Sci., 2013, 4, 1523). The AIRSS approach adopted herein provides the crucial link between atomic-scale structure and experimental studies.

| S-EPMC4840454 | biostudies-literature

Laser-Induced Methanol Decomposition for Ultrafast Hydrogen Production.

Project description:Methanol (CH3OH) is a liquid hydrogen (H2) source that effectively releases H2 and is convenient for transportation. Traditional thermocatalytic CH3OH reforming reaction is used to produce H2, but this process needs to undergo high reaction temperature (e.g., 200 °C) along with a catalyst and a large amount of carbon dioxide (CO2) emission. Although photocatalysis and photothermal catalysis under mild conditions are proposed to replace the traditional thermal catalysis to produce H2 from CH3OH, they still inevitably produce CO2 emissions that are detrimental to carbon neutrality. Here, we, for the first time, report an ultrafast and highly selective production of H2 without any catalysts and no CO2 emission from CH3OH by laser bubbling in liquid (LBL) at room temperature and atmospheric pressure. We demonstrate that a super high H2 yield rate of 33.41 mmol·h-1 with 94.26% selectivity is achieved upon the laser-driven process. This yield is 3 orders of magnitude higher than the best value reported for photocatalytic and photothermal catalytic H2 production from CH3OH to date. The energy conversion efficiency of laser light to H2 and CO can be up to 8.5%. We also establish that the far from thermodynamic equilibrium state with high temperature inside the laser-induced bubble and the kinetic process of rapid quenching of bubbles play crucial roles in H2 production upon LBL. Thermodynamically, the high temperature induced using laser in bubbles ensures fast and efficient release of H2 from CH3OH decomposition. Kinetically, rapidly quenching of laser-induced bubbles can inhibit reverse reaction and can keep the products in the initial stage, which guarantees high selectivity. This study presents a laser-driven ultrafast and highly selective production of H2 from CH3OH under normal conditions beyond catalytic chemistry.

| S-EPMC10204739 | biostudies-literature

Efficient hydrogen evolution in transition metal dichalcogenides via a simple one-step hydrazine reaction.

Project description:Hydrogen evolution reaction is catalysed efficiently with precious metals, such as platinum; however, transition metal dichalcogenides have recently emerged as a promising class of materials for electrocatalysis, but these materials still have low activity and durability when compared with precious metals. Here we report a simple one-step scalable approach, where MoOx/MoS2 core-shell nanowires and molybdenum disulfide sheets are exposed to dilute aqueous hydrazine at room temperature, which results in marked improvement in electrocatalytic performance. The nanowires exhibit ∼100 mV improvement in overpotential following exposure to dilute hydrazine, while also showing a 10-fold increase in current density and a significant change in Tafel slope. In situ electrical, gate-dependent measurements and spectroscopic investigations reveal that hydrazine acts as an electron dopant in molybdenum disulfide, increasing its conductivity, while also reducing the MoOx core in the core-shell nanowires, which leads to improved electrocatalytic performance.

| S-EPMC4906413 | biostudies-literature

Catalytic decomposition of hydroxylamine nitrate and hydrazine nitrate using Ru/ZSM-5 catalyst under mild reaction conditions.

Project description:Hydroxylamine nitrate and hydrazine nitrate are dangerous explosives and toxic chemicals. Catalytic decomposition is an efficient way for disposal of these chemicals. In the current work, a Ru/ZSM-5 catalyst has been fabricated and evaluated for the decomposition of hydroxylamine nitrate and hydrazine nitrate in 1.0 mol L-1 HNO3. The hydroxylamine nitrate and hydrazine nitrate can be thoroughly decomposed under 80 °C. And the Ru/ZSM-5 catalyst can be separated from the reaction mixture and reused at least 130 times with stable catalytic performance. Easy operation, less solid waste generation, and a simple catalytic device make the strategy reported here practical, environmentally friendly, and economically attractive.

| S-EPMC8981218 | biostudies-literature

Energy-saving hydrogen production by chlorine-free hybrid seawater splitting coupling hydrazine degradation.

Project description:Seawater electrolysis represents a potential solution to grid-scale production of carbon-neutral hydrogen energy without reliance on freshwater. However, it is challenged by high energy costs and detrimental chlorine chemistry in complex chemical environments. Here we demonstrate chlorine-free hydrogen production by hybrid seawater splitting coupling hydrazine degradation. It yields hydrogen at a rate of 9.2 mol h-1 gcat-1 on NiCo/MXene-based electrodes with a low electricity expense of 2.75 kWh per m3 H2 at 500 mA cm-2 and 48% lower energy equivalent input relative to commercial alkaline water electrolysis. Chlorine electrochemistry is avoided by low cell voltages without anode protection regardless Cl- crossover. This electrolyzer meanwhile enables fast hydrazine degradation to ~3 ppb residual. Self-powered hybrid seawater electrolysis is realized by integrating low-voltage direct hydrazine fuel cells or solar cells. These findings enable further opportunities for efficient conversion of ocean resources to hydrogen fuel while removing harmful pollutants.

| S-EPMC8263752 | biostudies-literature

Dual-strategy engineered nickel phosphide for achieving efficient hydrazine-assisted hydrogen production in seawater.

Project description:Electrocatalytic hydrogen production in seawater to alleviate freshwater shortage pressures is promising, but is hindered by the sluggish oxygen evolution reaction and detrimental chloride electrochemistry. Herein, a dual strategy approach of Fe-doping and CeO2-decoration in nickel phosphide (Fe-Ni2P/CeO2) is rationally designed to achieve superior bifunctional catalytic performance for the hydrogen evolution reaction (HER) and hydrazine oxidation reaction (HzOR) in seawater. Notably, the two-electrode Fe-Ni2P/CeO2-based hybrid seawater electrolyzer realizes energy-efficient and chlorine-free hydrogen production with ultralow cell voltages of 0.051 and 0.597 V at 10 and 400 mA cm-2, which are significantly lower than those needed in the hydrazine-free seawater electrolyzer. Density functional theory calculations manifest that the combination of Fe doping and heterointerface construction between Fe-Ni2P and CeO2 can adjust the electronic structure of the Ni2P and optimize the water dissociation barrier and hydrogen adsorption free energy, leading to improvement of the intrinsic catalytic performance. This route affords a feasible solution for future large-scale hydrogen generation using abundant ocean water.

| S-EPMC11220599 | biostudies-literature

Research on Hydrogen Production from Ammonia Decomposition by Pulsed Plasma Catalysis.

Project description:Driven by dual-carbon targets, marine engines are accelerating their transition towards low-carbon and zero-carbon. Ammonium-hydrogen fusion fuel is considered to be one of the most promising fuels for ship decarbonization. Using non-thermal plasma (NTP) catalytic ammonia on-line hydrogen production technology to achieve hydrogen supply is one of the most important means to guarantee the safety and effectiveness of hydrogen energy in the storage and transportation process. However, the efficiency of ammonia catalytic hydrogen production can be influenced to some extent by the presence of several factors, and the reaction mechanism is complex under the conditions of ship engine temperature emissions. This makes it difficult to realize the precise control of plasma catalytic hydrogen production from ammonia technology under temperature emission conditions, thus restricting an improvement in the ammonia conversion rate. In this study, a kinetic model of hydrogen production from ammonia catalyzed by NTP was established. The influencing factors (reaction temperature, pressure, N2/NH3 ratio in the feed gas) and mechanism path of hydrogen production from ammonia decomposition were explored. The results show that the increase in reaction temperature will lead to an increase in the ammonia conversion rate, while the ammonia conversion rate will decrease with the increase in reaction pressure and N2/NH3 ratio. When the reaction temperature is 300 K, the pressure is 1 bar, the feed gas is 98%N2/2%NH3, and the ammonia conversion rate is 16.7%. The reason why the addition of N2 is conducive to the hydrogen production from NH3 decomposition is that the reaction N2(A3) + NH3 => N2 + NH2 + H, triggered by the electron excited-state N2(A3), is the main reaction for NH3 decomposition.

| S-EPMC11901998 | biostudies-literature

Active site recovery and N-N bond breakage during hydrazine oxidation boosting the electrochemical hydrogen production.

Project description:Substituting hydrazine oxidation reaction for oxygen evolution reaction can result in greatly reduced energy consumption for hydrogen production, however, the mechanism and the electrochemical utilization rate of hydrazine oxidation reaction remain ambiguous. Herein, a bimetallic and hetero-structured phosphide catalyst has been fabricated to catalyze both hydrazine oxidation and hydrogen evolution reactions, and a new reaction path of nitrogen-nitrogen single bond breakage has been proposed and confirmed in hydrazine oxidation reaction. The high electro-catalytic performance is attributed to the instantaneous recovery of metal phosphide active site by hydrazine and the lowered energy barrier, which enable the constructed electrolyzer using bimetallic phosphide catalyst at both sides to reach 500 mA cm-2 for hydrogen production at 0.498 V, and offer an enhanced hydrazine electrochemical utilization rate of 93%. Such an electrolyzer can be powered by a bimetallic phosphide anode-equipped direct hydrazine fuel cell, achieving self-powered hydrogen production at a rate of 19.6 mol h-1 m-2.

| S-EPMC10083172 | biostudies-literature

Noble-Metal-Free Ni-W-O-Derived Catalysts for High-Capacity Hydrogen Production from Hydrazine Monohydrate.

Project description:Development of active and earth-abundant catalysts is pivotal to render hydrazine monohydrate (N2H4·H2O) viable as a hydrogen carrier. Herein, we report the synthesis of noble-metal-free Ni-W-O-derived catalysts using a hydrothermal method in combination with reductive annealing treatment. Interestingly, the thus-prepared Ni-based catalysts exhibit remarkably distinct catalytic properties toward N2H4·H2O decomposition depending upon the annealing temperature. From a systematic phase/microstructure/chemical state characterization and the first-principles calculations, we found that the variation of the apparent catalytic properties of these Ni-based catalysts should stem from the formation of different Ni-W alloys with distinct intrinsic activity, selectivity, and distribution state. The thereby chosen Ni-W alloy nanocomposite catalyst prepared under an optimized condition showed high activity, nearly 100% selectivity, and excellent stability toward N2H4·H2O decomposition for hydrogen production. Furthermore, this noble-metal-free catalyst enables rapid hydrogen production from commercially available N2H4·H2O solution with an intriguingly high hydrogen capacity of 6.28 wt % and a satisfactory dynamic response property. These results are inspiring and momentous for promoting the use of the N2H4·H2O-based H2 source systems.

| S-EPMC7919750 | biostudies-literature

Hydrogen production via thermocatalytic decomposition of methane using carbon-based catalysts.

Project description:Thermocatalytic decomposition (TCD) of methane is one of the most effective methods for pure hydrogen production. Catalysts were selected for TCD of methane in this study to utilize biochar as a catalyst. Among these catalysts, two catalysts (named activated biochar (AB) and heat-treated biochar (HB)) were prepared from Douglas fir, whereas the other four were prepared using commercial activated carbon and zeolite with and without doping ruthenium metal. The catalysts were characterized using XRD, SEM imaging, TEM, H2-TPR, and BET specific surface area and pore size analysis. The Ru doped commercial activated carbon catalyst (Ru-AC) was deactivated continuously during a 60 h reaction run, whereas AB exhibited comparatively stable methane conversion up to 60 h. The methane conversion was 21% for Ru-AC and 51% for AB after 60 h of reaction time at 800 °C. The very high surface area of AB (∼3250 m2 g-1) and its microporosity compared to other catalysts could have resulted in resistance against rapid deactivation. Furthermore, carbon nanotube by-products were observed in TEM images of solid residues that could form due to the presence of alkali metals in the biochar. Carbon nanotube formation could contribute significantly to the extended life of AB.

| S-EPMC9057708 | biostudies-literature