Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

The Mechanism of Adsorption of Rh(III) Bromide Complex Ions on Activated Carbon.

ABSTRACT: In the paper, the mechanism of the process of the Rh(III) ions adsorption on activated carbon ORGANOSORB 10-AA was investigated. It was shown, that the process is reversible, i.e., stripping of Rh(III) ions from activated carbon to the solution is also possible. This opens the possibility of industrial recovery of Rh (III) ions from highly dilute aqueous solutions. The activation energies for the forward and backward reaction were determined These are equal to c.a. 7 and 0 kJ/mol. respectively. Unfortunately, the efficiency of this process was low. Obtained maximum load of Rh(III) was equal to 1.13 mg per 1 g of activated carbon.

SUBMITTER: Wojnicki M

PROVIDER: S-EPMC8270305 | biostudies-literature | 2021 Jun

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

The Mechanism of Adsorption of Rh(III) Bromide Complex Ions on Activated Carbon.

Wojnicki Marek M Krawontka Andrzej A Wojtaszek Konrad K Skibińska Katarzyna K Csapó Edit E Pędzich Zbigniew Z Podborska Agnieszka A Kwolek Przemysław P Kwolek Przemysław P

Molecules (Basel, Switzerland) 20210624 13

In the paper, the mechanism of the process of the Rh(III) ions adsorption on activated carbon ORGANOSORB 10-AA was investigated. It was shown, that the process is reversible, i.e., stripping of Rh(III) ions from activated carbon to the solution is also possible. This opens the possibility of industrial recovery of Rh (III) ions from highly dilute aqueous solutions. The activation energies for the forward and backward reaction were determined These are equal to c.a. 7 and 0 kJ/mol. respectively. ...[more]

PMID: 34202725

Similar Datasets

Methylene blue adsorption mechanism of activated carbon synthesised from cashew nut shells.

Project description:Activated carbon produced from agricultural products and wastes has been applied widely to remove pollutants in the field of waste water treatment. However, the cost of this adsorbent depends so much on the raw material sources. Therefore, the approach of producing activated carbon from agricultural waste is strongly recommended due to economic advantages and environmental protection. One of the potential feed-stocks for the activated carbon production is cashew nut shell (CNS) waste which could reduce the negative impacts to the environment from the cashew nut processing industry and simultaneously enhance the values of the related products. This study focused on evaluating the influences of variable factors, such as activation temperature and time, on the properties of the activated carbon obtained from CNS. Methylene blue (MB) adsorption was applied to understand the adsorption mechanism of the products. The results show that increasing the activation temperature led to a rise in the adsorption capacity of the activated carbon within the temperature range of 800 to 850 °C. Otherwise, the values were reduced when the temperature was greater than 850 °C and this was related to the thermal decomposition of carbon. The adsorption capacity also increased when the activation time was changed from 30 min to 50 min. However, in the activation time range from 50 to 70 min, there was a reduction of the adsorption capacity of CNS-based activated carbon. The results also show that the MB adsorption of the activated carbon occurred with one-site-occupancy in the first layer and then layer-by-layer adsorption formation.

| S-EPMC9037662 | biostudies-literature

Adsorption of Hexavalent Chromium and Divalent Lead Ions on the Nitrogen-Enriched Chitosan-Based Activated Carbon.

Project description:Optimizing the physicochemical properties of the chitosan-based activated carbon (Ch-ACs) can greatly enhance its performance toward heavy metal removal from contaminated water. Herein, Ch was converted into a high surface area (1556 m2/g) and porous (0.69 cm3/g) ACs with large content of nitrogen (~16 wt%) using K2CO3 activator and urea as nitrogen-enrichment agents. The prepared Ch-ACs were tested for the removal of Cr(VI) and Pb(II) at different pH, initial metal ions concentration, time, activated carbon dosage, and temperature. For Cr(VI), the best removal was at pH = 2, while for Pb(II) the best pH for its removal was in the range of 4-6. At 25 °C, the Temkin model gives the best fit for the adsorption of Cr(VI), while the Langmuir model was found to be better for Pb(II) ions. The kinetics of adsorption of both heavy metal ions were found to be well-fitted by a pseudo-second-order model. The findings show that the efficiency and the green properties (availability, recyclability, and cost effectiveness) of the developed adsorbent made it a good candidate for wastewaters treatment. As preliminary work, the prepared sorbent was also tested regarding the removal of heavy metals and other contaminations from real wastewater and the obtained results were found to be promising.

| S-EPMC8400071 | biostudies-literature

Competitive adsorption behavior and adsorption mechanism of limestone and activated carbon in polymetallic acid mine water treatment.

Project description:Acid mine water (AMD) can cause significant environmental hazards due to its high concentration of metal ions, so the development of effective treatment methods is essential to mitigate its impact. In this study, adsorption experiments were conducted using limestone (LS) and activated carbon (AC) to explore the adsorption efficiency for different concentrations of metal ions. Adsorption was evaluated by static and competitive batch tests. The adsorbent mechanism was investigated using analytical techniques such as SEM, FTIR and XRD. The efficacy of LS and AC for competitive adsorption of Fe, Mn, Zn and Cu ions from AMD was evaluated. The study analyzed the effect of environmental conditions such as initial concentration and ionic strength on the adsorption efficiency. The results showed that LS showed high adsorption capacity for Fe and Cu, but was less effective in competitive adsorption of Mn. AC showed superior adsorption performance for Fe and Cu under competitive conditions due to its high surface area and functional groups. Both adsorbents showed selective efficacy influenced by the physicochemical properties of metal ions. This study helps to guide the optimization of adsorbents in AMD treatment and highlights the importance of selecting suitable materials based on specific metal ion properties.

| S-EPMC11464747 | biostudies-literature

Modelling of a new form of nitrogen doped activated carbon for adsorption of various dyes and hexavalent chromium ions.

Project description:This study reports a new form of nitrogen-doped activated carbon (AC5-600) produced from a blend of sawdust (SD) and fish waste (FW) treated with urea and ZnCl2 for the adsorption of toxic metals and dyes. The adsorbent was also explored in the treatment of acid brown 14 (AB14) and acid orange 7 (AO7) dye molecules and hexavalent chromium (Cr6+) ions. The pH controls the sorption of individual contaminants, with an observed superlative % of individual contaminants removed at pH 1.5. Removal at pH was credited to the electrostatic interaction (EI) between the anion dyes and Cr6+ species at this pH and the protonated sites accessible on the AC5-600 adsorbent surface. Based on the error values obtained from the non-linear modelling (NLM) of the kinetic and isotherm models, the Elovich (ELM-AB14 and Cr6+), pseudo-first- (PFOM-AB14) and second-order models (PSOM-AB14, AO7 and Cr6+) and the Freundlich (FRHM) model were found to ideally define the sorption of the various contaminants. The determined maximum sorption capacity (Qm) based on the NLM was 1114, 1929 and 318 mg.g-1 for AB14 dye, AO7 dye and Cr6+ ions, respectively. Based on the computational adsorption calculations, the sorption energies for the AO7 and AB14 dyes were -4.492 and -8.090 eV and 2.563, 1.789, 1.226 and 1.928 eV for Cr2, CrO3, CrO4, and CrO4H species. AB14 and AO7 dyes and Cr6+ ions adsorption to synthesised AC5-600 was predicted employing the response surface methodology (RSM) and artificial neural network (ANN) models. The ANN model was more effective in predicting AB14 and AO7 dyes and Cr6+ ions adsorption than the RSM, and it was highly applicable in the sorption process.

| S-EPMC11785975 | biostudies-literature

Adsorption and Desorption Performance and Mechanism of Tetracycline Hydrochloride by Activated Carbon-Based Adsorbents Derived from Sugar Cane Bagasse Activated with ZnCl2.

Project description:Adsorption and desorption behaviors of tetracycline hydrochloride by activated carbon-based adsorbents derived from sugar cane bagasse modified with ZnCl2 were investigated. The activated carbon was tested by SEM, EDX, BET, XRD, FTIR, and XPS. This activated carbon exhibited a high BET surface area of 831 m2 g-1 with the average pore diameter and pore volume reaching 2.52 nm and 0.45 m3 g-1, respectively. The batch experimental results can be described by Freundlich equation, pseudo-second-order kinetics, and the intraparticle diffusion model, while the maximum adsorption capacity reached 239.6 mg g-1 under 318 K. The effects of flow rate, bed height, initial concentration, and temperature were studied in fixed bed adsorption experiments, and adsorption data were fitted with six dynamic adsorption models. The results of characterizations and the batch experiments were analyzed to study the adsorption and desorption mechanisms. Tetracycline hydrochloride and activated carbon were bonded together by π-π interactions and cation-π bonds. Ethanol was used as an eluent which bonded with 10 hydrogen bond acceptors on tetracycline hydrochloride to form a complex by hydrogen bonding to achieve recycling.

| S-EPMC6943745 | biostudies-literature

Synthesis, crystal structure, cytotoxicity and action mechanism of a Rh(iii) complex with 8-hydroxy-2-methylquinoline as a ligand.

Project description:A rhodium(iii) complex, [Rh(MQ)(DMSO)2Cl2] (1), with 8-hydroxy-2-methylquinoline as the ligand was synthesized and characterized. Complex 1 exhibited cytotoxicity against BEL-7404, Hep-G2, NCI-H460, T-24, and A549 cell lines with IC50 values in the micromolar range (6.52-17.86 μM). Various experiments on the Hep-G2 cells showed that complex 1 caused cell cycle arrest at the S phase, downregulation of cdc25 A, cyclin A, cyclin B and CDK2, and upregulation of p21, p27 and p53. Furthermore, cytotoxicity mechanism studies suggested that complex 1-induced apoptosis was achieved via disruption of the mitochondrial function, which led to a significant loss of the mitochondrial membrane potential, an increase in the cellular levels of reactive oxygen species, cytochrome c, and apaf-1, and a fluctuation of the intracellular Ca2+ concentration. Taken altogether, complex 1 can trigger cancer cell death by inducing apoptosis through a mitochondrial dysfunction pathway.

| S-EPMC6072358 | biostudies-literature

Characterizing Adsorption Performance of Granular Activated Carbon with Permittivity.

Project description:A number of studies have achieved the consensus that microwave thermal technology can regenerate the granular activated carbon (GAC) more efficiently and energy-conservatively than other technologies. In particular, in the microwave heating industry, permittivity is a crucial parameter. This paper developed two equivalent models to establish the relationship between effective complex permittivity and pore volume of the GAC. It is generally based on Maxwell-Garnett approximation (MGA) theory. With two different assumptions in the model, two quantificational expressions were derived, respectively. Permittivity measurements and Brunauer-Emmett-Teller (BET) testing had been introduced in the experiments. Results confirmed the two expressions, which were extremely similar. Theoretical and experimental graphs were matched. This paper set up a bridge which links effective complex permittivity and pore volume of the GAC. Furthermore, it provides a potential and convenient method for the rapid assisted characterization of the GAC in its adsorption performance.

| S-EPMC5503362 | biostudies-other

Synthesis of Porous Activated Carbon Doped with Tetramethylammonium Hydroxide: Evaluation of Excellent Gasoline Vapor Adsorption Performance and Activation Mechanism.

Project description:The rapid urbanization and industrialization in China have led to an urgent dilemma for controlling urban air pollution, including the intensified emission of gasoline vapor into the atmosphere. Herein, we selected highland barley straw as a raw material and KOH and tetramethylammonium hydroxide (TMAOH) as activators to synthesize nitrogen-doped layered porous carbon (K-thAC) by a three-step activation method. The obtained K-thAC materials had a high specific surface area, reaching 3119 m2/g. Dynamic adsorption experiments demonstrated a superior adsorption capacity of up to 501 mg/g (K-thAC-25) for gasoline vapor compared with other documented carbon adsorbents. Moreover, adjusting the ratio of raw materials with a series of active ingredients could further improve the pore properties of the obtained K-thACs and their adsorption performance for gasoline vapor. Furthermore, the K-thAC materials were also characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), synchronous thermogravimetry (STA), X-ray powder diffraction (XRD), energy dispersive spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), and nitrogen adsorption tests. This study synthesized a novel plant-based material to treat gasoline vapor pollution efficiently.

| S-EPMC10421261 | biostudies-literature

Adsorption behaviour and mechanism of the PFOS substitute OBS (sodium <i>p</i>-perfluorous nonenoxybenzene sulfonate) on activated carbon.

Project description:Perfluorooctane sulfonate (PFOS) was listed as a persistent organic pollutant by the Stockholm Convention. As a typical alternative to PFOS, sodium p-perfluorous nonenoxybenzene sulfonate (OBS) has recently been detected in the aquatic environment which has caused great concern. For the first time, the adsorption behaviour and mechanism of OBS on activated carbon (AC) with different physical and chemical properties were investigated. Decreasing the particle size of AC can accelerate its adsorption for OBS, while AC with too small particle size was not conducive to its adsorption capacity due to the destruction of its pore structure during the mechanical crushing process. Intra-particle diffusion had a lesser effect on the adsorption rate of AC with smaller particle size, higher hydrophilicity and larger pore size. Reactivation of AC by KOH can greatly enlarge their pore size and surface area, greatly increasing their adsorption capacities. The adsorption capacity of two kinds of R-GAC exceeded 0.35 mmol g-1, significantly higher than that of other ACs. However, increasing the hydrophilicity of AC would decrease their adsorption capacities. Further investigation indicated that a larger pore size and smaller particle size can greatly enhance the adsorptive removal of OBS on AC in systems with other coexisting PFASs and organic matter due to the reduction of the pore-blocking effect. The spent AC can be successfully regenerated by methanol, and it can be partly regenerated by hot water and NaOH solution. The percentage of regeneration for the spent AC was 70.4% with 90°C water temperature and up to 95% when 5% NaOH was added into the regeneration solution. These findings are very important for developing efficient adsorbents for the removal of these newly emerging PFASs from wastewater and understanding their interfacial behaviour.

| S-EPMC6774934 | biostudies-literature

Dataset on adsorption of phenol onto activated carbons: Equilibrium, kinetics and mechanism of adsorption.

Project description:Two activated carbons (AC) prepared from onion leaves (OL) (Allium fistulosum) and palm kernel shell (PS) (Elaeis guineesis) were used to adsorb phenol from aqueous solution. Adsorption kinetics was studied by Pseudo-first order (PFO) and Pseudo-second order (PSO) models, while equilibrium was modelled using Langmuir, Freundlich, Toth and Redlich Peterson isotherms. Adsorption mechanism was analyzed applying Boyd and intraparticle diffusion models. The parameters of each one of the models were calculated using Minitab17® by non-linear regression. Piecewise linear regression was applied to calculate the parameters of Boyd and intraparticle diffusion models. Phenol adsorption onto activated carbons is describe better by Langmuir isotherm and PSO kinetic model. Maximum adsorption capacity was between 30 and 40 mg.g-1.

| S-EPMC7509189 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data