Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Voltage-induced penetration effect in liquid metals at room temperature.

ABSTRACT: Room-temperature liquid metal is discovered to be capable of penetrating through macro- and microporous materials by applying a voltage. The liquid metal penetration effects are demonstrated in various porous materials such as tissue paper, thick and fine sponges, fabrics, and meshes. The underlying mechanism is that the high surface tension of liquid metal can be significantly reduced to near-zero due to the voltage-induced oxidation of the liquid metal surface in a solution. It is the extremely low surface tension and gravity that cause the liquid metal to superwet the solid surface, leading to the penetration phenomena. These findings offer new opportunities for novel microfluidic applications and could promote further discovery of more exotic fluid states of liquid metals.

SUBMITTER: Yun FF

PROVIDER: S-EPMC8288959 | biostudies-literature | 2020 Feb

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Voltage-induced penetration effect in liquid metals at room temperature.

Yun Frank F FF Yu Zhenwei Z He Yahua Y Jiang Lei L Wang Zhao Z Gu Haoshuang H Wang Xiaolin X

National science review 20191105 2

Room-temperature liquid metal is discovered to be capable of penetrating through macro- and microporous materials by applying a voltage. The liquid metal penetration effects are demonstrated in various porous materials such as tissue paper, thick and fine sponges, fabrics, and meshes. The underlying mechanism is that the high surface tension of liquid metal can be significantly reduced to near-zero due to the voltage-induced oxidation of the liquid metal surface in a solution. It is the extremel ...[more]

PMID: 34692052

Similar Datasets

Activated platinum in gallium-based room-temperature liquid metals for enhanced reduction reactions.

Project description:Room-temperature gallium-based liquid metals (LMs) have recently attracted significant attention worldwide for application in catalysis because of their unique combination of fluidic and catalytic properties. Platinum loading in LMs is expected to enhance the catalytic performance of various reaction systems. However, Pt-loaded methods for Ga-based LMs have not yet been sufficiently developed to improve the catalytic performance and Pt utilization efficiency. In this study, a novel method for the fabrication of Pt-incorporated LMs using Pt sputter deposition (Pt(dep)-LMs) was developed. The Pt(dep)-LMs contained well-dispersed Pt flakes with diameters of 0.89 ± 0.6 μm. The catalytic activity of the Pt(dep)-LM with a Pt loading of ∼0.7 wt% was investigated using model reactions such as methylene blue (MB) reduction and hydrogen production in an acidic aqueous solution. The Pt(dep)-LMs showed a higher MB reduction rate (three times) and hydrogen production (three times) than the LM loaded with conventional Pt black (∼0.7 wt%). In contrast to the Pt(dep)-LMs, solid-based Ga with a Pt loading of ∼0.7 wt% did not catalyze the reactions. These results demonstrate that Pt activation occurred in the Pt(dep)-LMs fabricated by Pt sputtering, and that the fluidic properties of the LMs enhanced the catalytic reduction reactions. Thus, these findings highlight the superior performance of the Pt deposition method and the advantages of using Pt-LM-based catalysts.

| S-EPMC10577643 | biostudies-literature

Concentrated Ionic-Liquid-Based Electrolytes for High-Voltage Lithium Batteries with Improved Performance at Room Temperature.

Project description:Ionic liquids (ILs) have been widely explored as alternative electrolytes to combat the safety issues associated with conventional organic electrolytes. However, hindered by their relatively high viscosity, the electrochemical performances of IL-based cells are generally assessed at medium-to-high temperature and limited cycling rate. A suitable combination of alkoxy-functionalized cations with asymmetric imide anions can effectively lower the lattice energy and improve the fluidity of the IL material. The Li/Li1.2 Ni0.2 Mn0.6 O2 cell employing N-N-diethyl-N-methyl-N-(2-methoxyethyl)ammonium (fluorosulfonyl)(trifluoromethanesulfonyl)imide (DEMEFTFSI)-based electrolyte delivered an initial capacity of 153 mAh g-1 within the voltage range of 2.5-4.6 V, with a capacity retention of 65.5 % after 500 cycles and stable coulombic efficiencies exceeding 99.5 %. Moreover, preliminary battery tests demonstrated that the drawbacks in terms of rate capability could be improved by using Li-concentrated IL-based electrolytes. The improved room-temperature rate performance of these electrolytes was likely owing to the formation of Li+ -containing aggregate species, changing the concentration-dependent Li-ion transport mechanism.

| S-EPMC6852532 | biostudies-literature

Room temperature CO<sub>2</sub> reduction to solid carbon species on liquid metals featuring atomically thin ceria interfaces.

Project description:Negative carbon emission technologies are critical for ensuring a future stable climate. However, the gaseous state of CO2 does render the indefinite storage of this greenhouse gas challenging. Herein, we created a liquid metal electrocatalyst that contains metallic elemental cerium nanoparticles, which facilitates the electrochemical reduction of CO2 to layered solid carbonaceous species, at a low onset potential of -310 mV vs CO2/C. We exploited the formation of a cerium oxide catalyst at the liquid metal/electrolyte interface, which together with cerium nanoparticles, promoted the room temperature reduction of CO2. Due to the inhibition of van der Waals adhesion at the liquid interface, the electrode was remarkably resistant to deactivation via coking caused by solid carbonaceous species. The as-produced solid carbonaceous materials could be utilised for the fabrication of high-performance capacitor electrodes. Overall, this liquid metal enabled electrocatalytic process at room temperature may result in a viable negative emission technology.

| S-EPMC6391491 | biostudies-literature

Room-temperature liquid diffused separation induced crystallization for high-quality perovskite single crystals.

Project description:Large single crystals serve as an ideal platform for investigating intrinsic material properties and optoelectronic applications. Here we develop a method, namely, room-temperature liquid diffused separation induced crystallization that uses silicone oil to separate the solvent from the perovskite precursors, to grow high-quality perovskite single crystals. The growth kinetics of perovskite single crystals using this method is elucidated, and their structural and optoelectronic properties are carefully characterized. The resultant perovskite single crystals, taking CH3NH3PbBr3 as an example, exhibit approximately 1 µs lifetime, a low trap density of 4.4 × 109 cm-3, and high yield of 92%, which are appealing for visible light or X-ray detection. We hope our findings will be of great significance for the continued advancement of high-quality perovskite single crystals, through a better understanding of growth mechanisms and their deployment in various optoelectronics. The diffused separation induced crystallization strategy presents a major step forward for advancing the field on perovskite single crystals.

| S-EPMC7055282 | biostudies-literature

Room-Temperature Zwitterionic Liquid Crystals for Mechanical Actuators.

Project description:We have developed room-temperature smectic liquid-crystalline (LC) ion conductors by the self-assembly of a zwitterionic mesogenic compound and a series of fluorinated lithium salts. The conductivity of lithium bis(trifluoromethylsulfonyl)imide LC complex reached 4 × 10-3 S cm-1 at ambient conditions. This LC complex sandwiched between two conductive polymer electrodes can be used in low-voltage mechanical actuators with a peak-to-peak bending deflection of ca. 20 mm upon ±1 V, 0.03 Hz excitation.

| S-EPMC9928414 | biostudies-literature

Room-Temperature Production of Nanocrystalline Molybdenum Disulfide (MoS2) at the Liquid-Liquid Interface.

Project description:Scalable synthesis of 2D materials is a prerequisite for their commercial exploitation. Here, a novel method of producing nanocrystalline molybdenum disulfide (MoS2) at the liquid-liquid interface is demonstrated by decomposing a molecular precursor (tetrakis(N,N-diethyldithiocarbamato) molybdenum(IV)) in an organic solvent. The decomposition occurs over a few hours at room temperature without stirring or the addition of any surfactants, producing MoS2 which can be isolated onto substrates of choice. The formation of MoS2 at the liquid-liquid interface can be accelerated by the inclusion of hydroxide ions in the aqueous phase, which we propose to act as a catalyst. The precursor concentration was varied to minimize MoS2 thickness, and the organic solvent was chosen to optimize the speed and quality of formation. The kinetics of the MoS2 formation has been investigated, and a reaction mechanism has been proposed. The synthesis method is, to the best of our knowledge, the first reported room-temperature synthesis of transition-metal dichalcogenides, offering a potential solution to scalable 2D material production.

| S-EPMC7011726 | biostudies-literature

Electron penetration triggering interface activity of Pt-graphene for CO oxidation at room temperature.

Project description:Achieving CO oxidation at room temperature is significant for gas purification but still challenging nowadays. Pt promoted by 3d transition metals (TMs) is a promising candidate for this reaction, but TMs are prone to be deeply oxidized in an oxygen-rich atmosphere, leading to low activity. Herein we report a unique structure design of graphene-isolated Pt from CoNi nanoparticles (PtǀCoNi) for efficiently catalytic CO oxidation in an oxygen-rich atmosphere. CoNi alloy is protected by ultrathin graphene shell from oxidation and therefore modulates the electronic property of Pt-graphene interface via electron penetration effect. This catalyst can achieve near 100% CO conversion at room temperature, while there are limited conversions over Pt/C and Pt/CoNiOx catalysts. Experiments and theoretical calculations indicate that CO will saturate Pt sites, but O2 can adsorb at the Pt-graphene interface without competing with CO, which facilitate the O2 activation and the subsequent surface reaction. This graphene-isolated system is distinct from the classical metal-metal oxide interface for catalysis, and it provides a new thought for the design of heterogeneous catalysts.

| S-EPMC8490350 | biostudies-literature

Liquid-like behaviours of metallic glassy nanoparticles at room temperature.

Project description:Direct atomic-scale observations and measurements on dynamics of amorphous metallic nanoparticles (a-NPs) are challenging owing to the insufficient consciousness to their striking characterizations and the difficulties in technological approaches. In this study, we observe coalescence process of the a-NPs at atomic scale. We measure the viscosity of the a-NPs through the particles coalescence by in situ method. We find that the a-NPs have fast dynamics, and the viscosity of the a-NPs exhibits a power law relationship with size of the a-NPs. The a-NPs with sizes smaller than 3 nm are in a supercooled liquid state and exhibit liquid-like behaviours with a decreased viscosity by four orders of magnitude lower than that of bulk glasses. These results reveal the intrinsic flow characteristics of glasses in low demension, and pave a way to understand the liquid-like behaviours of low dimension glass, and are also of key interest to develop size-controlled nanodevices.

| S-EPMC6488636 | biostudies-literature

Ionic imbalance induced self-propulsion of liquid metals.

Project description:Components with self-propelling abilities are important building blocks of small autonomous systems and the characteristics of liquid metals are capable of fulfilling self-propulsion criteria. To date, there has been no exploration regarding the effect of electrolyte ionic content surrounding a liquid metal for symmetry breaking that generates motion. Here we show the controlled actuation of liquid metal droplets using only the ionic properties of the aqueous electrolyte. We demonstrate that pH or ionic concentration gradients across a liquid metal droplet induce both deformation and surface Marangoni flow. We show that the Lippmann dominated deformation results in maximum velocity for the self-propulsion of liquid metal droplets and illustrate several key applications, which take advantage of such electrolyte-induced motion. With this finding, it is possible to conceive the propulsion of small entities that are constructed and controlled entirely with fluids, progressing towards more advanced soft systems.

| S-EPMC4976217 | biostudies-literature

Room-temperature phosphorescence of a supercooled liquid: kinetic stabilisation by desymmetrisation.

Project description:Achieving organic room-temperature phosphorescence (RTP) in a solvent-free liquid state is a challenging task because the liquid state provides a less rigid environment than the crystal. Here, we report that an unsymmetrical heteroaromatic 1,2-diketone forms an organic RTP liquid. This diketone exists as a kinetically stable supercooled liquid, which resists crystallisation even under pricking or shearing stresses, and remains as a liquid for several months. The unsymmetrical diketone core is flexible, with eight distinct conformers possible, which prevents nucleation and growth for the liquid-solid transition. Interestingly, the thermodynamically stable crystalline solid-state was non-emissive. Thus, the RTP of the diketone was found to be liquiefaction-induced. Single-crystal X-ray structure analysis revealed that the diminished RTP of the crystal is due to insufficient intermolecular interactions and restricted access to an emissive conformer. Our work demonstrates that flexible unsymmetrical skeletons are promising motifs for bistable liquid-solid molecular systems, which are useful for the further development of stimuli-responsive materials that use phase transitions.

| S-EPMC8580009 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data