Dataset Information

Controlling radiative heat flows in interior spaces to improve heating and cooling efficiency.

ABSTRACT: Heating and cooling in buildings account for nearly 20% of energy use globally. The goal of heating and cooling systems is to maintain the thermal comfort of a building's human occupants, typically by keeping the interior air temperature at a setpoint. However, if one could maintain the occupant's thermal comfort while changing the setpoint, large energy savings are possible. Here we propose a mechanism to achieve these savings by dynamically tuning the thermal emissivity of interior building surfaces, thereby decoupling the mean radiant temperature from actual temperatures of interior surfaces. We show that, in cold weather, setting the emissivity of interior surfaces to a low value (0.1) can decrease the setpoint as much as 6.5°C from a baseline of 23°C. Conversely, in warm weather, low-emissivity interior surfaces result in a 4.5°C cooling setpoint decrease relative to high emissivity (0.9) surfaces, highlighting the need for tunable emissivity for maximal year-round efficiency.

SUBMITTER: Xu J

PROVIDER: S-EPMC8319807 | biostudies-literature | 2021 Aug

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Controlling radiative heat flows in interior spaces to improve heating and cooling efficiency.

Xu Jin J Raman Aaswath P AP

iScience 20210709 8

Heating and cooling in buildings account for nearly 20% of energy use globally. The goal of heating and cooling systems is to maintain the thermal comfort of a building's human occupants, typically by keeping the interior air temperature at a setpoint. However, if one could maintain the occupant's thermal comfort while changing the setpoint, large energy savings are possible. Here we propose a mechanism to achieve these savings by dynamically tuning the thermal emissivity of interior building su ...[more]

PMID: 34355151

Similar Datasets

Project description:In developing countries, the most common diagnostic method for tuberculosis (TB) is microscopic examination sputum smears. Current assessment requires time-intensive inspection across the microscope slide area, and this contributes to its poor diagnostic sensitivity of ≈50%. Spatially concentrating TB bacteria in a smaller area is one potential approach to improve visual detection and potentially increase sensitivity. We hypothesized that a combination of magnetic concentration and induced droplet Marangoni flow would spatially concentrate Mycobacterium tuberculosis on the slide surface by preferential deposition of beads and TB-bead complexes in the center of an evaporating droplet. To this end, slide substrate and droplet solvent thermal conductivities and solvent surface tension, variables known to impact microfluidic flow patterns in evaporating droplets, were varied to select the most appropriate slide surface coating. Optimization in a model system used goniometry, optical coherence tomography, and microscope images of the final deposition pattern to observe the droplet flows and maximize central deposition of 1 μm fluorescent polystyrene particles and 200 nm nanoparticles (NPs) in 2 μL droplets. Rain-X® polysiloxane glass coating was identified as the best substrate material, with a PBS-Tween droplet solvent. The use of smaller, 200 nm magnetic NPs instead of larger 1 μm beads allowed for bright field imaging of bacteria. Using these optimized components, we compared standard smear methods to the Marangoni-based spatial concentration system, which was paired with magnetic enrichment using iron oxide NPs, isolating M. bovis BCG (BCG) from samples containing 0 and 103 to 106 bacilli/mL. Compared to standard smear preparation, paired analysis demonstrated a combined volumetric and spatial sample enrichment of 100-fold. With further refinement, this magnetic/Marangoni flow concentration approach is expected to improve whole-pathogen microscopy-based diagnosis of TB and other infectious diseases.

Dataset Information

Controlling radiative heat flows in interior spaces to improve heating and cooling efficiency.

Publications

Controlling radiative heat flows in interior spaces to improve heating and cooling efficiency.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets