Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Synthesis and Characterization of Tungsten Suboxide WnO3n-1 Nanotiles.

ABSTRACT: WnO3n-1 nanotiles, with multiple stoichiometries within one nanotile, were synthesized via the chemical vapour transport method. They grow along the [010] crystallographic axis, with the thickness ranging from a few tens to a few hundreds of nm, with the lateral size up to several µm. Distinct surface corrugations, up to a few 10 nm deep appear during growth. The {102}r crystallographic shear planes indicate the WnO3n-1 stoichiometries. Within a single nanotile, six stoichiometries were detected, namely W16O47 (WO2.938), W15O44 (WO2.933), W14O41 (WO2.928), W13O38 (WO2.923), W12O35 (WO2.917), and W11O32 (WO2.909), with the last three never being reported before. The existence of oxygen vacancies within the crystallographic shear planes resulted in the observed non-zero density of states at the Fermi energy.

SUBMITTER: Pirker L

PROVIDER: S-EPMC8398204 | biostudies-literature | 2021 Aug

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Synthesis and Characterization of Tungsten Suboxide WnO3n-1 Nanotiles.

Pirker Luka L Višić Bojana B Kovač Janez J Škapin Srečo D SD Remškar Maja M

Nanomaterials (Basel, Switzerland) 20210802 8

WnO3n-1 nanotiles, with multiple stoichiometries within one nanotile, were synthesized via the chemical vapour transport method. They grow along the [010] crystallographic axis, with the thickness ranging from a few tens to a few hundreds of nm, with the lateral size up to several µm. Distinct surface corrugations, up to a few 10 nm deep appear during growth. The {102}r crystallographic shear planes indicate the WnO3n-1 stoichiometries. With ...[more]

PMID: 34443817

Similar Datasets

Visible and near-infrared modulating tungsten suboxide nanorods electrochromic films in acidic aqueous electrolytes.

Project description:Proton-based aqueous electrolytes can be used to achieve high performance electrochromic nanocrystal thin films due to their small ion size. However, acidic aqueous electrolyte systems have not yet been explored in near-infrared (NIR) absorbing plasmonic tungsten oxide nanocrystal films. Here, we demonstrate tungsten suboxide nanorod films with excellent visible and NIR modulation performance in the H+-based aqueous electrolytes, thanks to their mesoporous structure, nanosized domains, and open tunnel structure. Colloidally synthesized WO2.83 nanorods with an average width of 6 nm and length of 48 nm were converted to WO2.90 nanorod film via annealing in air, while still preserving open tunnels. These films exhibit fast switching speed (tc = 0.9 s, tb = 2.1 s), excellent cycling stability over 2500 cycles, wide optical modulation up to ΔT = 53.8 % in the NIR region, and a high coloration efficiency (CE) of 167 cm2 C⁻1 at 1300 nm. Additionally, introducing a thin spacer (25 μm) reduced intrinsic NIR absorption from water, thereby enhancing the NIR modulation properties. These highly performing aqueous proton-electrolytes-based electrochromic devices open new possibilities for implementing visible and NIR electrochromism.

| S-EPMC11419856 | biostudies-literature

Synthesis and Characterization of Tungsten Amide Complexes for the Deposition of Tungsten Disulfide Thin Films.

Project description:To substitute corrosive halogen ligands, we designed and synthesized novel tungsten complexes containing amido ligands, W(DMEDA)3 (1) and W(DEEDA)3 (2) (DMEDA = N,N'-dimethylethylenediamido; DEEDA = N,N'-diethylethylenediamido). Complexes 1 and 2 were characterized by 1H NMR, 13C NMR, FT-IR, and elemental analysis. The pseudo-octahedral molecular structure of 1 was confirmed by single-crystal X-ray crystallography. The thermal properties of 1 and 2 were analyzed by thermogravimetric analysis (TGA), which confirmed that the precursors were volatile and exhibited adequate thermal stability. Additionally, the WS2 deposition test was performed using 1 in thermal chemical vapor deposition (thermal CVD). Further analysis of the surface of the thin films was conducted using Raman spectroscopy, scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS).

| S-EPMC10249077 | biostudies-literature

Synthesis and Characterization of Hydrido Carbonyl Molybdenum and Tungsten PNP Pincer Complexes.

Project description:In the present study the Mo(0) and W(0) complexes [M(PNP)(CO)3] as well as seven-coordinate cationic hydridocarbonyl Mo(II) and W(II) complexes of the type [M(PNP)(CO)3H]+, featuring PNP pincer ligands based on 2,6-diaminopyridine, have been prepared and fully characterized. The synthesis of Mo(0) complexes [Mo(PNP)(CO)3] was accomplished by treatment of [Mo(CO)3(CH3CN)3] with the respective PNP ligands. The analogous W(0) complexes were prepared by reduction of the bromocarbonyl complexes [W(PNP)(CO)3Br]+ with NaHg. These intermediates were obtained from the known dinuclear complex [W(CO)4(μ-Br)Br]2, prepared in situ from W(CO)6 and stoichiometric amounts of Br2. Addition of HBF4 to [M(PNP)(CO)3] resulted in clean protonation at the molybdenum and tungsten centers to generate the Mo(II) and W(II) hydride complexes [M(PNP)(CO)3H]+. The protonation is fully reversible, and upon addition of NEt3 as base the Mo(0) and W(0) complexes [M(PNP)(CO)3] are regenerated quantitatively. All heptacoordinate complexes exhibit fluxional behavior in solution. The mechanism of the dynamic process of the hydrido carbonyl complexes was investigated by means of DFT calculations, revealing that it occurs in a single step. The structures of representative complexes were determined by X-ray single-crystal analyses.

| S-EPMC3688336 | biostudies-literature

Oxygen Content-Controllable Synthesis of Non-Stoichiometric Silicon Suboxide Nanoparticles by Electrochemical Anodization.

Project description:A facile route to producing non-stoichiometric silicon suboxide nanoparticles (SiOx NPs, 0 < x < 1) with an adjustable oxygen content is proposed. The process is based on electrochemical anodization involving the application of a strong electric field near the surface of a Si electrode to directly convert the Si electrode into SiOx NPs. The difference in ion mobility between oxygen species (O2- and OH-), formed during anodization, causes the production of non-stoichiometric SiOx on the surface of the Si while, simultaneously, fluoride ions in the electrolyte solution etch the formed SiOx layer, generating NPs under the intense electric field. The adjustment of the applied voltage and anodization temperature alters the oxygen content and the size of the SiOx NPs, respectively, allowing the characteristics of the NPs to be readily controlled. The proposed approach can be applied for mass production of SiOx NPs and is highly promising in the field of batteries and optoelectronics.

| S-EPMC7693619 | biostudies-literature

Morphological and Phase Controlled Tungsten Based Nanoparticles: Synthesis and Characterization of Scheelites, Wolframites, and Oxides Nanomaterials.

Project description:For the first time tungsten based nanoparticles (WNPs) of scheelite (MWO(4); M = Ca, Sr, Ba, Pb), wolframite (MWO(4); M = Mn, Fe, Zn & (Mg(0.60)Mn(0.17)Fe(0.26))WO(4)), and the oxide (WO(3) and W(18)O(49)) were synthesized from solution precipitation (i.e.,trioctylamine or oleic acid) and solvothermal (i.e., benzyl alcohol) routes. The resultant WNPs were prepared directly from tungsten (VI) ethoxide (W(OCH(2)CH(3))(6), 1) and stoichiometeric mixtures of the following precursors: [Ca(N(SiMe(3))(2))(2)](2) (2), Pb(N(SiMe(3))(2))(2) (3), Mn[(mu-Mes)(2)Mn(Mes)](2) (4), [Fe(mu-Mes)(Mes)](2) (5), Fe(CO)(5) (6), H(+)[Ba(2)(mu(3)-ONep)(mu-ONep)(2)(ONep)(ONep)(3)(py)](-) (2) (7), H(+)[Sr(5)(mu(4)-O)(mu(3)-ONep)(4)(mu-ONep)(4)(ONep)(py)(4)](-) (8), and [Zn(Et)(ONep)(py)](2) (9) where Mes = C(6)H(2)(CH(3))(3)-2,4,6, ONep = OCH(2)CMe(3), Et = CH(2)CH(3), and py = pyridine. Through these routes, the WNP morphologies were found to be manipulated by the processing conditions, while precursor selection influenced the final phase observed. For the solution precipitation route, 1 yielded (5 x 100 nm) W(18)O(49) rods while stochiometeric reactions between 1 and (2 - 9) generated homogenous sub 30 nm nano-dots, -diamonds, -rods, and -wires for the MWO(4) systems. For the solvothermal route, 1 was found to produce wires of WO(3) with aspect ratios of 20 while (1 & 2) formed 10 - 60 nm CaWO(4) nanodots. Room temperature photoluminescent (PL) emission properties of select WNPs were also examined with fluorescence spectroscopy (lambda(ex) = 320 nm). Broad PL emissions = 430, 420, 395, 420 nm were noted for 5 x 100 nm W(18)O(49) rods, 5 x 15 nm, CaWO(4) rods, 10 - 30 nm CaWO(4) dots, and 10 nm BaWO(4) diamonds, respectively.

| S-EPMC2685282 | biostudies-literature

Material Synthesis and Device Aspects of Monolayer Tungsten Diselenide.

Project description:In this paper, we investigate the synthesis of WSe2 by chemical vapor deposition and study the current transport and device scaling of monolayer WSe2. We found that the device characteristics of the back-gated WSe2 transistors with thick oxides are very sensitive to the applied drain bias, especially for transistors in the sub-micrometer regime. The threshold voltage, subthreshold swing, and extracted field-effect mobility vary with the applied drain bias. The output characteristics in the long-channel transistors show ohmic-like behavior, while that in the short-channel transistors show Schottky-like behavior. Our investigation reveals that these phenomena are caused by the drain-induced barrier lowering (short-channel effect). For back-gated WSe2 transistors with 280 nm oxide, the short-channel effect appears when the channel length is shorter than 0.4 µm. This extremely long electrostatic scaling length is due to the thick back-gate oxides. In addition, we also found that the hydrogen flow rate and the amount of WO3 precursor play an important role in the morphology of the WSe2. The hole mobility of the monolayer WSe2 is limited by Columbic scattering below 250 K, while it is limited by phonon scattering above 250 K. These findings are very important for the synthesis of WSe2 and accurate characterization of the electronic devices based on 2D materials.

| S-EPMC5869716 | biostudies-literature

Synthesis, characterization, and physico-chemical aspects of a new PVC-based quaternary triethanol ammonium chloride anionite for tungsten recovery.

Project description:The usability of polyvinyl chloride-based quaternary triethanol ammonium chloride anionite (PVC-TEAC) as a potential extractant for tungstate was investigated to recover tungstate from Gabal Qash Amir, Egypt, assaying 70.91% WO3. Structure elucidation for PVC-TEAC anionite was successfully carried out using several techniques. Experimental measurements, such as pH, agitation time, initial tungsten concentration, anionite dose, co-ions, temperature, and eluting agents, have been optimized. It was found that PVC-TEAC anionite has a maximum capacity of 63 mg per gram. From the distribution isotherm modeling, Langmuir's model fits the experimental results better than Freundlich's, with a theoretical value of 61.728 mg g-1. According to kinetic modeling, the first- and second-order modeling may be regarded as a mixed modeling for a successful adsorption system. Thermodynamic prospects reveal that the adsorption process was predicted as an exothermic, spontaneous, and preferable adsorption at low temperatures. Tungsten ions can be eluted from the loaded anionite, by 1M H2SO4 with a 97% efficiency rate. It was found that PVC-TEAC anionite reveals good separation factor (S.F.) towards most of co-ions. A successful Alkali fusion with NaOH flux followed by tungstate recovery by PVC-TEAC anionite is used to obtain a high-purity tungsten oxide concentrate (WO3), with a tungsten content of 78.3% and a purity of 98.75%.

| S-EPMC11407338 | biostudies-literature

Human keratinocytes exposed to tungsten carbide and tungsten carbide cobalt nanoparticles and cobalt chloride

Project description:Comparison of transcriptional profiles after exposure of HaCaT cells to WC or WC-Co nanoparticles and respective amount of free cobalt in form of CoCl2 after 3 hours and 3 days of exposure. Genes responding especially to nanoparticles or leached cobalt ions should be determined.

2010-02-01 | GSE16727 | GEO

Nucleation of amorphous shear bands at nanotwins in boron suboxide.

Project description:The roles of grain boundaries and twin boundaries in mechanical properties are well understood for metals and alloys. However, for covalent solids, their roles in deformation response to applied stress are not established. Here we characterize the nanotwins in boron suboxide (B6O) with twin boundaries along the {0111} planes using both scanning transmission electron microscopy and quantum mechanics. Then, we use quantum mechanics to determine the deformation mechanism for perfect and twinned B6O crystals for both pure shear and biaxial shear deformations. Quantum mechanics suggests that amorphous bands nucleate preferentially at the twin boundaries in B6O because the twinned structure has a lower maximum shear strength by 7.5% compared with perfect structure. These results, which are supported by experimental observations of the coordinated existence of nanotwins and amorphous shear bands in B6O, provide a plausible atomistic explanation for the influence of nanotwins on the deformation behaviour of superhard ceramics.

| S-EPMC4804168 | biostudies-literature

The Tungsten-Promoted Synthesis of Piperidyl-Modified erythro-Methylphenidate Derivatives.

Project description:Due to its efficacy as a dopamine receptor agonist, methylphenidate (MPH) is of interest as a potential therapeutic for cocaine addiction. While numerous derivatives of MPH have been investigated for their potential medicinal value, functionalization of the piperidine ring has not been explored. The pyridine borane ligand in WTp(NO)(PMe3)(η2-pyBH3) is dearomatized by the metal and can be elaborated to the analogous η2-mesylpyridinium complex. Installing a methyl phenylacetate moiety at the C2' position via a Reformatsky reaction followed by a tandem protonation/nucleophilic addition sequence results in a library of erythro MPH analogues functionalized at the piperidyl C5' position. The functional group is added chemoselectively to C5', cis to the methyl phenylacetate. Repeating this procedure with an enantioenriched source of the tungsten reagent results in enantioenriched MPH derivatives. All identities of the newly reported compounds are supported by comprehensive 2D NMR and HRMS data or crystallographic data.

| S-EPMC10540299 | biostudies-literature