Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Fitting of 2D WAXD data: Mesophases in polymer fibers.

ABSTRACT: This data article presents fitting results of wide-angle x-ray diffraction (WAXD) patterns of melt-spun polymer fibers from amorphous materials (polycarbonate (PC), cyclo-olefin polymer (COP), copolyamide (coPA), polyethylene terephthalate glycol (PETG)) and semi-crystalline materials (polyethylene terephthalate (PET), poly-3-hydroxybutyrate(P3HB)). The data was fit using the fitting algorithms, previously described in the publication by Perret and Hufenus 'Insights into strain-induced solid mesophases in melt-spun polymer fibers' [1]. Fitting results of WAXD data and details about azimuthal, equatorial, meridional or off-axis profiles are presented in sections 1.1-1.2. SAXS patterns of fibers, melt-spun from amorphous materials, are shown in section 1.3. Fiber production parameters are given in section 2.1, and a description of the WAXD measurements and fitting details, e.g., the chosen fitting parameters, are given in section 2.2.

SUBMITTER: Perret E

PROVIDER: S-EPMC8521234 | biostudies-literature | 2021 Dec

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Fitting of 2D WAXD data: Mesophases in polymer fibers.

Perret Edith E Hufenus Rudolf R

Data in brief 20211009

This data article presents fitting results of wide-angle x-ray diffraction (WAXD) patterns of melt-spun polymer fibers from amorphous materials (polycarbonate (PC), cyclo-olefin polymer (COP), copolyamide (coPA), polyethylene terephthalate glycol (PETG)) and semi-crystalline materials (polyethylene terephthalate (PET), poly-3-hydroxybutyrate(P3HB)). The data was fit using the fitting algorithms, previously described in the publication by Perret and Hufenus 'Insights into strain-induced solid mes ...[more]

PMID: 34703857

Similar Datasets

Properties, X-ray data and 2D WAXD fitting procedures of melt-spun poly(ɛ-caprolactone).

Project description:Rheological and thermal properties of the poly(ɛ-caprolactone) (PCL) polymer are presented in Section 1.1. Section 1.2 summarizes results of melt-spun PCL filaments. Specifically, we show the necking point stabilization during high-speed online drawing in Section 1.2.1, filament morphology in Section 1.2.2, wide-angle X-ray diffraction (WAXD) fitting results in Section 1.2.3, WAXD patterns of aged fibers in Section 1.2.4, crystallinity analysis in Section 1.2.5 and small-angle X-ray scattering (SAXS) analysis results in Section 1.2.6. Details about the materials, experimental and analytical methods are given in Section 2. Of particular interest may be the simulation and fitting procedures of 2D WAXD patterns, which are summarized in Section 2.7.2. For more information see the publication by Selli et al. 'Mesophase in melt-spun poly(ɛ-caprolactone) filaments: structure-mechanical property relationship' [1].

| S-EPMC7479331 | biostudies-literature

WAXD, polarized ATR-FTIR and DSC data of stress-annealed poly(3-hydroxybutyrate) fibers.

Project description:This article summarizes synchrotron wide-angle x-ray diffraction (WAXD) patterns, polarized attenuated Fourier transform infrared spectroscopy (ATR-FTIR) data and differential scanning calorimetry (DSC) data of differently stress-annealed poly(3-hydroxybutyrate) (P3HB) fibers. Additionally, in-situ polarized ATR-FTIR data has been measured under tensile drawing of pre-annealed P3HB fibers under low annealing stress. Modifications to the ATR-FTIR setup and sample holders for performing measurements on P3HB fibers are explained in the experimental section. For more information see 'Reversible mesophase in stress-annealed poly(3-hydroxybutyrate) fibers: A synchrotron x-ray and polarized ATR-FTIR study' [1].

| S-EPMC8581511 | biostudies-literature

Inorganic Nanotube Mesophases Enable Strong Self-Healing Fibers.

Project description:The assembly of one-dimensional nanomaterials into macroscopic fibers can improve mechanical as well as multifunctional performance. Double-walled aluminogermanate imogolite nanotubes are geo-inspired analogues of carbon nanotubes, synthesized at low temperature, with complementary properties. Here, continuous imogolite-based fibers are wet-spun within a poly(vinyl alcohol) matrix. The lyotropic liquid crystallinity of the system produces highly aligned fibers with tensile stiffness and strength up to 24.1 GPa (14.1 N tex-1) and 0.8 GPa (0.46 N tex-1), respectively. Significant enhancements over the pure polymer control are quantitatively attributed to both matrix refinement and direct nanoscale reinforcement, by fitting an analytical model. Most intriguingly, imogolite-based fibers show a high degree of healability via evaporation-induced self-assembly, recovering up to 44% and 19% of the original fiber tensile stiffness and strength, respectively. This recovery at high absolute strength highlights a general strategy for the development of high-performance healable fibers relevant to composite structures and other applications.

| S-EPMC7304920 | biostudies-literature

2D Raman, ATR-FTIR, WAXD, SAXS and DSC data of PET mono- and PET/PA6 bicomponent filaments.

Project description:This data in brief article summarizes structural data obtained from monocomponent melt-spun and offline drawn poly(ethylene terephthalate) (PET) monofilaments, as well as from melt-spun bicomponent core-sheath PET-polyamide 6 (PA6) filaments. The diameters of the single filaments range from 27 µm to 79 µm. Presented analysis techniques and results thereof are (i) Raman mapping of filament cross-sections: 2D maps of peak positions, widths, peak area ratios; (ii) attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR): ATR-FTIR spectra and extraction of surface crystallinity; (iii) wide-angle x-ray diffraction (WAXD): WAXD patterns and extraction of average crystallinity; (iv) small-angle x-ray scattering (SAXS): SAXS patterns and determined crystallite sizes and long-spacings; (v) differential scanning calorimetry (DSC): thermograms and extracted average crystallinity as well as thermal properties; (vi) atomic force microscopy (AFM): AFM image of the surface of an embedded fiber cross-section. For more information, see the publication by E. Perret et al. 'High-resolution 2D Raman mapping of mono- and bicomponent filament cross-sections' [1].

| S-EPMC8488250 | biostudies-literature

DNA data storage in electrospun and melt-electrowritten composite nucleic acid-polymer fibers.

Project description:Incorporating biomolecules as integral parts of computational systems represents a frontier challenge in bio- and nanotechnology. Using DNA to store digital data is an attractive alternative to conventional information technologies due to its high information density and long lifetime. However, developing an adequate DNA storage medium remains a significant challenge in permitting the safe archiving and retrieval of oligonucleotides. This work introduces composite nucleic acid-polymer fibers as matrix materials for digital information-bearing oligonucleotides. We devised a complete workflow for the stable storage of DNA in PEO, PVA, and PCL fibers by employing electrohydrodynamic processes to produce electrospun nanofibers with embedded oligonucleotides. The on-demand retrieval of messages is afforded by non-hazardous chemical treatment and subsequent PCR amplification and DNA sequencing. Finally, we develop a platform for melt-electrowriting of polymer-DNA composites to produce microfiber meshes of programmable patterns and geometries.

| S-EPMC10792485 | biostudies-literature

The future is 2D: spectral-temporal fitting of dynamic MRS data provides exponential gains in precision over conventional approaches.

Project description:PurposeMany MRS paradigms produce 2D spectral-temporal datasets, including diffusion-weighted, functional, and hyperpolarized and enriched (carbon-13, deuterium) experiments. Conventionally, temporal parameters-such as T2 , T1 , or diffusion constants-are assessed by first fitting each spectrum independently and subsequently fitting a temporal model (1D fitting). We investigated whether simultaneously fitting the entire dataset using a single spectral-temporal model (2D fitting) would improve the precision of the relevant temporal parameter.MethodsWe derived a Cramer Rao lower bound for the temporal parameters for both 1D and 2D approaches for 2 experiments: a multi-echo experiment designed to estimate metabolite T2 s, and a functional MRS experiment designed to estimate fractional change ( δ$$ \delta $$ ) in metabolite concentrations. We investigated the dependence of the relative standard deviation (SD) of T2 in multi-echo and δ$$ \delta $$ in functional MRS.ResultsWhen peaks were spectrally distant, 2D fitting improved precision by approximately 20% relative to 1D fitting, regardless of the experiment and other parameter values. These gains increased exponentially as peaks drew closer. Dependence on temporal model parameters was weak to negligible.ConclusionOur results strongly support a 2D approach to MRS fitting where applicable, and particularly in nuclei such as hydrogen and deuterium, which exhibit substantial spectral overlap.

| S-EPMC10087547 | biostudies-literature

Electrospun Polymer Fibers for Electronic Applications.

Project description:Nano- and micro- fibers of conjugated polymer semiconductors are particularly interesting both for applications and for fundamental research. They allow an investigation into how electronic properties are influenced by size confinement and chain orientation within microstructures that are not readily accessible within thin films. Moreover, they open the way to many applications in organic electronics, optoelectronics and sensing. Electro-spinning, the technique subject of this review, is a simple method to effectively form and control conjugated polymer fibers. We provide the basics of the technique and its recent advancements for the formation of highly conducting and high mobility polymer fibers towards their adoption in electronic applications.

| S-EPMC5453086 | biostudies-other

Shape memory polymer (SMP) scaffolds with improved self-fitting properties.

Project description:"Self-fitting" shape memory polymer (SMP) scaffolds prepared as semi-interpenetrating networks (semi-IPNs) with crosslinked linear-poly(ε-caprolactone)-diacrylate (PCL-DA, Mn∼10 kg mol-1) and linear-poly(l-lactic acid) (PLLA, Mn∼15 kg mol-1) [75/25 wt%] exhibited robust mechanical properties and accelerated degradation rates versus a PCL-DA scaffold control. However, their potential to treat irregular craniomaxillofacial (CMF) bone defects is limited by their relatively high fitting temperature (Tfit∼55 °C; related to the Tm of PCL) required for shape recovery (i.e. expansion) and subsequent shape fixation during press fitting of the scaffold, which can be harmful to surrounding tissue. Additionally, the viscosity of the solvent-based precursor solutions, cast over a fused salt template during fabrication, can limit scaffold size. Thus, in this work, analogous semi-IPN SMP scaffolds were formed with a 4-arm star-PCL-tetracryalate (star-PCL-TA) (Mn∼10 kg mol-1) and star-PLLA (Mn∼15 kg mol-1). To assess the impact of a star-polymer architecture, four semi-IPN compositions were prepared: linear-PCL-DA/linear-PLLA (L/L), linear-PCL-DA/star-PLLA (L/S), star-PCL-TA/linear-PLLA (S/L) and star-PCL-TA/star-PLLA (S/S). Two PCL controls were also prepared: LPCL (i.e. 100% linear-PCL-DA) and SPCL (i.e. 100% star-PCL-TA). The S/S semi-IPN scaffold exhibited particularly desirable properties. In addition to achieving a lower, tissue-safe Tfit (∼45 °C), it exhibited the fastest rate of degradation which is anticipated to more favourably permit neotissue infiltration. The radial expansion pressure exerted by the S/S semi-IPN scaffold at Tfit was greater than that of LPCL, which is expected to enhance osseointegration and mechanical stability. The intrinsic viscosity of the S/S semi-IPN macromer solution was also reduced such that larger scaffold specimens could be prepared.

| S-EPMC8183596 | biostudies-literature

Local Piezoelectric Response of Polymer/Ceramic Nanocomposite Fibers.

Project description:Effective converse piezoelectric coefficient (d33,eff) mapping of poly(vinylidene fluoride) (PVDF) nanofibers with ceramic BaTiO3 nanoparticle inclusions obtained by electrospinning was carried out by piezoresponse force microscopy (PFM) in a peculiar dynamic mode, namely constant-excitation frequency-modulation (CE-FM), particularly suitable for the analysis of compliant materials. Mapping of single nanocomposite fibers was carried out to demonstrate the ability of CE-FM-PFM to investigate the nanostructure of semicrystalline polymers well above their glass transition temperature, such as PVDF, by revealing the distribution of piezoelectric activity of the nanofiber, as well as of the embedded nanoparticles employed. A decreased piezoelectric activity at the nanoparticle site compared to the polymeric fiber was found. This evidence can be rationalized in terms of a tradeoff between the dielectric constants and piezoelectric coefficients of the component materials, as well as on the mutual orientation of polar axes.

| S-EPMC9783531 | biostudies-literature

One-step optogenetics with multifunctional flexible polymer fibers.

Project description:Optogenetic interrogation of neural pathways relies on delivery of light-sensitive opsins into tissue and subsequent optical illumination and electrical recording from the regions of interest. Despite the recent development of multifunctional neural probes, integration of these modalities in a single biocompatible platform remains a challenge. We developed a device composed of an optical waveguide, six electrodes and two microfluidic channels produced via fiber drawing. Our probes facilitated injections of viral vectors carrying opsin genes while providing collocated neural recording and optical stimulation. The miniature (<200 μm) footprint and modest weight (<0.5 g) of these probes allowed for multiple implantations into the mouse brain, which enabled opto-electrophysiological investigation of projections from the basolateral amygdala to the medial prefrontal cortex and ventral hippocampus during behavioral experiments. Fabricated solely from polymers and polymer composites, these flexible probes minimized tissue response to achieve chronic multimodal interrogation of brain circuits with high fidelity.

| S-EPMC5374019 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data