Dataset Information

Dual-Functional Nano-Functionalized Titanium Scaffolds to Inhibit Bacterial Growth and Enhance Osteointegration.

ABSTRACT: Implantable biomaterials play a key role for the success of orthopedic surgery procedures. However, infections remain one of the most damaging post-operative complications that lead to the implant failure. Recently, several approaches have been proposed to avoid or manage implant-associated infections. Among these, an appropriate surface functionalization to confer intrinsic antibacterial properties preserving the osteo-integration ability represents an appealing strategy for the development of innovative implant materials. Titanium and its alloys are the most used materials for manufacturing of both articular and bone skull prostheses as well as dental implants. However, to date there is still a significant clinical need to improve their bioactivity, osseointegration and antibacterial activity. In this study, titanium biomimetic scaffolds are prepared by nano-functionalization with TiO2 (Ti_TiO2) and γFe2O3 (Ti_γFe2O3). Both cytocompatibility and antibacterial activity have been evaluated. Data show that both nano-functionalized scaffolds exhibit a good antibacterial activity towards Staphylococcus aureus, reducing colony number to 99.4% (Ti_TiO2) and 99.9% (Ti_γFe2O3), respectively. In addition, an increase of both human adipose-derived mesenchymal stem cells (hADSCs) cell proliferation (up to 4.3-fold for Ti_TiO2 and 3.7-fold for Ti_γFe2O3) and differentiation has been observed. These data suggest that these nano-functionalized titanium substrates represent promising prototypes for new antimicrobial and osteoconductive biomaterials to be used in the orthopedic field to reconstruct significant bone defect.

SUBMITTER: Calabrese G

PROVIDER: S-EPMC8537418 | biostudies-literature | 2021 Oct

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Dual-Functional Nano-Functionalized Titanium Scaffolds to Inhibit Bacterial Growth and Enhance Osteointegration.

Calabrese Giovanna G Franco Domenico D Petralia Salvatore S Monforte Francesca F Condorelli Guglielmo Guido GG Squarzoni Stefano S Traina Francesco F Conoci Sabrina S

Nanomaterials (Basel, Switzerland) 20211007 10

Implantable biomaterials play a key role for the success of orthopedic surgery procedures. However, infections remain one of the most damaging post-operative complications that lead to the implant failure. Recently, several approaches have been proposed to avoid or manage implant-associated infections. Among these, an appropriate surface functionalization to confer intrinsic antibacterial properties preserving the osteo-integration ability represents an appealing strategy for the development of ...[more]

PMID: 34685075

Similar Datasets

Project description:Osteointegration is one of the most important factors for implant success. Several biomolecules have been used as part of drug delivery systems to improve implant integration into the surrounding bone tissue. Chemically modified mRNA (cmRNA) is a new form of therapeutic that has been used to induce bone healing. Combined with biomaterials, cmRNA can be used to develop transcript-activated matrices for local protein production with osteoinductive potential. In this study, we aimed to utilize this technology to create bone morphogenetic protein 2 (BMP2) transcript-activated coatings for titanium (Ti) implants. Therefore, different coating methodologies as well as cmRNA incorporation strategies were evaluated. Three different biocompatible biomaterials were used for the coating of Ti, namely, poly-d,l-lactic acid (PDLLA), fibrin, and fibrinogen. cmRNA-coated Ti disks were assayed for transfection efficiency, cmRNA release, cell viability and proliferation, and osteogenic activity in vitro. We found that cmRNA release was significantly delayed in Ti surfaces previously coated with biomaterials. Consequently, the transfection efficiency was greatly improved. PDLLA coating improved the transfection efficiency in a concentration-dependent manner. Lower PDLLA concentration used for the coating of Ti resulted in higher transfection efficiency. Fibrin and fibrinogen coatings showed even higher transfection efficiencies compared to all PDLLA concentrations. In those disks, not only the expression was up to 24-fold higher but also the peak of maximal expression was delayed from 24 h to 5 days, and the duration of expression was also extended until 7 days post-transfection. For fibrin, higher transfection efficiencies were obtained in the coatings with the lowest thrombin amounts. Accordingly, fibrinogen coatings gave the best results in terms of cmRNA transfection. All biomaterial-coated Ti surfaces showed improved cell viability and proliferation, though this was more noticeable in the fibrinogen-coated disks. The latter was also the only coating to support significant amounts of BMP2 produced by C2C12 cells in vitro. Osteogenesis was confirmed using BMP2 cmRNA fibrinogen-coated Ti disks, and it was dependent of the cmRNA amount present. Alkaline phosphatase (ALP) activity of C2C12 increased when using fibrinogen coatings containing 250 ng of cmRNA or more. Similarly, mineralization was also observed that increased with increasing cmRNA concentration. Overall, our results support fibrinogen as an optimal material to deliver cmRNA from titanium-coated surfaces.

Project description:The precise mechanisms that lead to orthopedic implant failure are not well understood; it is believed that the micromechanical environment at the bone-implant interface regulates structural stability of an implant. In this work, we seek to understand how the 3D mechanical environment of an implant affects bone formation during early osteointegration. We employed two-photon lithography (TPL) direct laser writing to fabricate 3-dimensional rigid polymer scaffolds with tetrakaidecahedral periodic geometry, herewith referred to as nanolattices, whose strut dimensions were on the same order as osteoblasts' focal adhesions (∼2μm) and pore sizes on the order of cell size, ∼10μm. Some of these nanolattices were subsequently coated with thin conformal layers of Ti or W, and a final outer layer of 18nm-thick TiO2 was deposited on all samples to ensure biocompatibility. Nanomechanical experiments on each type of nanolattice revealed the range of stiffnesses of 0.7-100MPa. Osteoblast-like cells (SAOS-2) were seeded on each nanolattice, and their mechanosensitve response was explored by tracking mineral secretions and intracellular f-actin and vinculin concentrations after 2, 8 and 12days of cell culture in mineralization media. Experiments revealed that the most compliant nanolattices had ∼20% more intracellular f-actin and ∼40% more Ca and P secreted onto them than the stiffer nanolattices, where such cellular response was virtually indistinguishable. We constructed a simple phenomenological model that appears to capture the observed relation between scaffold stiffness and f-actin concentration. This model predicts a range of optimal scaffold stiffnesses for maximum f-actin concentration, which appears to be directly correlated with osteoblast-driven mineral deposition. This work suggests that three-dimensional scaffolds with titania-coated surfaces may provide an optimal microenvironment for cell growth when their stiffness is similar to that of cartilage (∼0.5-3MPa). These findings help provide a greater understanding of osteoblast mechanosensitivity and may have profound implications in developing more effective and safer bone prostheses.Statement of significanceCreating prostheses that lead to optimal bone remodeling has been a challenge for more than two decades because of a lack of thorough knowledge of cell behavior in three-dimensional (3D) environments. Literature has shown that 2D substrate stiffness plays a significant role in determining cell behavior, however, limitations in fabrication techniques and difficulties in characterizing cell-scaffold interactions have limited our understanding of how 3D scaffolds' stiffness affects cell response. The present study shows that scaffold structural stiffness affects osteoblasts cellular response. Specifically this work shows that the cells grown on the most compliant nanolattices with a stiffness of 0.7MPa expressed ∼20% higher concentration of intracellular f-actin and secreted ∼40% more Ca and P compared with all other nanolattices. This suggests that bone scaffolds with a stiffness close to that of cartilage may serve as optimal 3D scaffolds for new synthetic bone graft materials.

Dataset Information

Dual-Functional Nano-Functionalized Titanium Scaffolds to Inhibit Bacterial Growth and Enhance Osteointegration.

Publications

Dual-Functional Nano-Functionalized Titanium Scaffolds to Inhibit Bacterial Growth and Enhance Osteointegration.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets