Dataset Information

Role of Na-Montmorillonite on Microbially Induced Calcium Carbonate Precipitation.

ABSTRACT: The use of additives has generated significant attention due to their extensive application in the microbially induced calcium carbonate precipitation (MICP) process. This study aims to discuss the effects of Na-montmorillonite (Na-MMT) on CaCO3 crystallization and sandy soil consolidation through the MICP process. Compared with the traditional MICP method, a larger amount of CaCO3 precipitate was obtained. Moreover, the reaction of Ca2+ ions was accelerated, and bacteria were absorbed by a small amount of Na-MMT. Meanwhile, an increase in the total cementing solution (TCS) was not conducive to the previous reaction. This problem was solved by conducting the reaction with Na-MMT. The polymorphs and morphologies of the CaCO3 precipitates were tested by using X-ray diffraction and scanning electron microscopy. Further, when Na-MMT was used, the morphology of CaCO3 changed from an individual precipitate to agglomerations of the precipitate. Compared to the experiments without Na-MMT in the MICP process, the addition of Na-MMT significantly reduced the hydraulic conductivity (HC) of sandy soil consolidated.

SUBMITTER: Tang G

PROVIDER: S-EPMC8538570 | biostudies-literature | 2021 Oct

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Role of Na-Montmorillonite on Microbially Induced Calcium Carbonate Precipitation.

Tang Guowang G Jia Cangqin C Wang Guihe G Yu Peizhi P Zhang Haonan H

Molecules (Basel, Switzerland) 20211014 20

The use of additives has generated significant attention due to their extensive application in the microbially induced calcium carbonate precipitation (MICP) process. This study aims to discuss the effects of Na-montmorillonite (Na-MMT) on CaCO3 crystallization and sandy soil consolidation through the MICP process. Compared with the traditional MICP method, a larger amount of CaCO3 precipitate was obtained. Moreover, the reaction of Ca2+ ions was accelerated, and ...[more]

PMID: 34684789

Similar Datasets

Project description:Simple plugging of the high-permeability "thief zones" of oil reservoirs is the most plausible and also the most straightforwardly achievable approach to enhance sweep efficiency and oil recovery. Sporosarcina pasteurii is a representative microorganism with the ability to precipitate calcium carbonate (CaCO3) via enzymatic hydrolysis of urea in the presence of calcium ions. Microbially induced calcium carbonate precipitation (MICP) can cement and seal the granular and fractured media and thus can be used as a potential microbial plugging agent for the high-permeability zones of oil reservoirs. The following investigated the microscopic characteristics of MICP plugging and its efficacy in permeability reduction. The columns of near-spherical silica sand and angular silica sand with three separate granularities (40/60, 60/80, and 80/120 mesh) were used as artificial rock cores representing distinct pore sizes and pore characteristics to investigate the efficacy and microprocess of MICP plugging with different biotreatment periods. The results indicated that permeability is reduced significantly after only short periods of biotreatment. After eight cycles of MICP treatments, the permeability for each type of cores dropped by 54-90% of individual initial permeabilities. The measured CaCO3 content indicated that the decreasing rate in permeability with the increasing CaCO3 content experiences three contrasting stages, namely, slow decline, speedy decline, and plateauing. X-ray diffraction indicated that most of the generated CaCO3 crystals occur as vaterite with only a small amount of calcite. Imaging by scanning electron microscopy further revealed the microprocess of MICP plugging. Microorganisms first concentrate on the pore wall to secrete CaCO3, forming a thin and large uniform layer of CaCO3. Then, some nucleation sites of CaCO3 crystals will experience further preferential growth, resulting in large, dominant crystals that act as a plugging agent within the pore space. Compared to extracellular polymeric substances, which are currently the primary microbial plugging agent used to enhance sweep efficiency of oil reservoirs, bio-CaCO3 appears more effective in plugging in terms of its morphology, size, and growth characteristics.

Project description:Microbially induced calcium carbonate precipitation (MICP) process utilising the biogeochemical reactions for low energy cementation has recently emerged as a potential technology for numerous engineering applications. The design and development of an efficient MICP process depends upon several physicochemical and biological variables; amongst which the initial bacterial cell concentration is a major factor. The goal of this study is to assess the impact of initial bacterial cell concentration on ureolysis and carbonate precipitation kinetics along with its influence on the calcium carbonate crystal properties; as all these factors determine the efficacy of this process for specific engineering applications. We have also investigated the role of subsequent cell recharge in calcium carbonate precipitation kinetics for the first time. Experimental results showed that the kinetics of ureolysis and calcium carbonate precipitation are well-fitted by an exponential logistic equation for cell concentrations between optical density range of 0.1 OD to 0.4 OD. This equation is highly applicable for designing the optimal processes for microbially cemented soil stabilization applications using native or augmented bacterial cultures. Multiple recharge kinetics study revealed that the addition of fresh bacterial cells is an essential step to keep the fast rate of precipitation, as desirable in certain applications. Our results of calcium carbonate crystal morphology and mineralogy via scanning electron micrography, energy dispersive X-ray spectroscopy and X-ray diffraction analysis exhibited a notable impact of cell number and extracellular urease concentration on the properties of carbonate crystals. Lower cell numbers led to formation of larger crystals compared to high cell numbers and these crystals transform from vaterite phase to the calcite phase over time. This study has demonstrated the significance of kinetic models for designing large-scale MICP applications.

Dataset Information

Role of Na-Montmorillonite on Microbially Induced Calcium Carbonate Precipitation.

Publications

Role of Na-Montmorillonite on Microbially Induced Calcium Carbonate Precipitation.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets