Dataset Information

High Selectivity and Reusability of Biomass-Based Adsorbent for Chloramphenicol Removal.

ABSTRACT: Recently, biomass-based materials have attracted increasing attention because of their advantages of low cost, environment-friendly and nonpollution. Herein, the feasibility of using corn stalk biomass fiber (CF) and Fe3O4 embedded chitosan (CS) as a novel biomass-based adsorbent (CFS) to remove chloramphenicol (CAPC) from aqueous solution. Structure of CFS was characterized by using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), Brunauer-Emmett-Teller (BET), scanning electron microscopy (SEM) and zeta potential techniques. The effects of solution pH, adsorption time and ion strength on the adsorption capacity were examined. Adsorption isotherms obtained from batch experiments were better fitted by Langmuir model compared with Freundlich model, Dubinin-Radushkevich model and Temkin model. Adsorption kinetic data matched well to the pseudo-second order kinetic model. CAPC adsorption was endothermic, spontaneous, and entropy-increasing nature on CFS. In addition, the CFS could be separated by an external magnetic field, recycled, and reused without any significant loss in the adsorption capacity of CAPC. Based on these excellent performances, there is potential that CFS can be considered as a proficient and economically suitable material for the CAPC removal from the water environment.

SUBMITTER: Xing W

PROVIDER: S-EPMC8621775 | biostudies-literature | 2021 Nov

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

High Selectivity and Reusability of Biomass-Based Adsorbent for Chloramphenicol Removal.

Xing Weinan W Liu Qi Q Wang Jingyi J Xia Siye S Ma Li L Lu Ran R Zhang Yujing Y Huang Yudong Y Wu Guangyu G

Nanomaterials (Basel, Switzerland) 20211103 11

Recently, biomass-based materials have attracted increasing attention because of their advantages of low cost, environment-friendly and nonpollution. Herein, the feasibility of using corn stalk biomass fiber (CF) and Fe<sub>3</sub>O<sub>4</sub> embedded chitosan (CS) as a novel biomass-based adsorbent (CFS) to remove chloramphenicol (CAPC) from aqueous solution. Structure of CFS was characterized by using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), Brunauer-Emmett-T ...[more]

PMID: 34835715

Similar Datasets

Project description:This paper investigates the selectivity of GMA-based-non-woven fabrics adsorbent towards copper ion (Cu) functionalized with several aliphatic amines. The aliphatic amines used in this study were ethylenediamine (EDA), diethylenetriamine (DETA), triethylenetetramine (TETA), and tetraethylenepentamine (TEPA). The non-woven polyethylene/polypropylene fabrics (NWF) were grafted with glycidyl methacrylate (GMA) via pre-radiation grafting technique, followed by chemical functionalization with the aliphatic amine. To prepare the ion recognition polymer (IRP), the functionalized amine GMA-grafted-NWF sample was subjected to radiation crosslinking process along with the crosslinking agent, divinylbenzene (DVB), in the presence of Cu ion as a template in the matrix of the adsorbent. Functionalization with different aliphatic amine was carried out at different amine concentrations, grafting yield, reaction temperature, and reaction time to study the effect of different aliphatic amine onto amine density yield. At a concentration of 50% of amine and 50% of isopropanol, EDA, DETA, TETA, and TEPA had attained amine density around 5.12, 4.06, 3.04, and 2.56 mmol/g-ad, respectively. The amine density yield decreases further as the aliphatic amine chain grows longer. The experimental condition for amine functionalization process was fixed at 70% amine, 30% isopropanol, 60 °C for grafting temperature, and 2 h of grafting time for attaining 100% of grafting yield (Dg). The prepared adsorbents were characterized comprehensively in terms of structural and morphology with multiple analytical tools. An adsorptive removal and selectivity of Cu ion by the prepared adsorbent was investigated in a binary metal ion system. The IRP samples with a functional precursor of EDA, the smallest aliphatic amine had given the higher adsorption capacity and selectivity towards Cu ion. The selectivity of IRP samples reduces as the aliphatic amine chain grows longer, EDA to TEPA. However, IRP samples still exhibited remarkably higher selectivity in comparison to the amine immobilized GMA-g-NWF at similar adsorption experimental conditions. This observation indicates that IRP samples possess higher selectivity after incorporation of the ion recognition imprint technique via the radiation crosslinking process.

Dataset Information

High Selectivity and Reusability of Biomass-Based Adsorbent for Chloramphenicol Removal.

Publications

High Selectivity and Reusability of Biomass-Based Adsorbent for Chloramphenicol Removal.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets