Nature Inspired MXene-Decorated 3D Honeycomb-Fabric Architectures Toward Efficient Water Desalination and Salt Harvesting.
Ontology highlight
ABSTRACT:
SUBMITTER: Lei Z
PROVIDER: S-EPMC8643288 | biostudies-literature | 2021 Dec
REPOSITORIES: biostudies-literature
Publications
Nature Inspired MXene-Decorated 3D Honeycomb-Fabric Architectures Toward Efficient Water Desalination and Salt Harvesting.
Lei Zhiwei Z Sun Xuantong X Zhu Shifeng S Dong Kai K Liu Xuqing X Wang Lili L Zhang Xiansheng X Qu Lijun L Zhang Xueji X
Nano-micro letters 20211204 1
Similar Datasets
Project description:Solar powered water evaporation is a green and environmentally friendly water treatment technology, which is a hot research topic for water purification at present. Advanced structural design and hydrophilic photothermal materials have achieved efficient solar evaporation of pure water, but the long-term stability of high salinity desalination has become a problem that cannot be ignored in practical applications. In order to solve this problem, a hydrophobic honeycomb structure MXene/AuNFs composite membrane was proposed in this paper, which used the three-dimensional highly porous microstructure of MXene and multibranched structure of gold nanoflowers particles to improve the light absorption and photothermal conversion efficiency of MXene/AuNFs. At the same time, the surface of the composite membrane was modified with hydrophobic fluorosilane 1H,1H,2H,2H-perfluorodecyltriethoxysilane (PFTE). The hydrophobic layer can prevent the accumulation of salt particles on the surface of the membrane, so that the composite film can continue to produce water vapor in a high salt environment. With high utilization rate of light energy, multiple-level geometrical structures of MXene for rapid water transport on the filter membrane and salt barrier on the membrane good stability, the hydrophobic MXene/AuNFs achieves solar evaporation rate of 1.59 kg m-2 h-1 and solar conversion efficiency is 97.8%, and stable operation under simulated sea water conditions under one sun irradiation over more than 10 cycles. The hydrophobic MXene/AuNFs membrane proved to be an efficient and stable photothermal material for solar desalination.
| S-EPMC10985539 | biostudies-literature
Project description:Clean water supply in off-grid locations remains a stumbling stone for socio-economic development in remote areas where solar energy is abundant. In this regard, several technologies have already introduced various solutions to the off-grid freshwater predicament; however, most of them are either costly or complex to operate. Nonetheless, photothermal membrane distillation (PMD) has emerged as a promising candidate with great potential to be autonomously driven by solar energy. Instead of using energy-intensive bulk feed heating in conventional MD systems, PMD membranes can directly harvest the incident solar light at the membrane interface as an alternative driving energy resource for the desalination process. Because of its excellent photothermal properties and stability in ionic environments, herein, Ti3C2Tx MXene was coated onto commercial polytetrafluoroethylene (PTFE) membranes to allow for a self-heated PMD process. An average water vapor flux of 0.77 kg/m2 h with an excellent temporal response under intermitting lighting and a photothermal efficiency of 65.3% were achieved by the PMD membrane under one-sun irradiation for a feed salinity of 0.36 g/L. Naturally, the efficiency of the process decreased with higher feed concentrations due to the reduction of the evaporation rate and the scattering of incident sunlight toward the membrane photothermal surface, especially at rates above 10 g/L. Notably, with such performance, 1 m2 of the MXene-coated PMD membrane can fulfill the recommended daily potable water intake for a household, that is, ca. 6 L/day.
| S-EPMC8815036 | biostudies-literature
Project description:The herein reported work describes the development of hierarchically-organized fluorescent nanomaterials inspired by plant antenna systems. These hybrid materials are based on nanostructured zeolitic materials (LTL zeolite) doped with laser dyes, which implies a synergism between organic and inorganic moieties. The non-interconnected channeled structure and pore dimensions (7.1 Å) of the inorganic host are ideal to order and align the allocated fluorophores inside, inferring also high thermal and chemical stability. These artificial antennae harvest a broad range of chromatic radiation and convert it into predominant red-edge or alternatively white-light emission, just choosing the right dye combination and concentration ratio to modulate the efficiency of the ongoing energy transfer hops. A further degree of organization can be achieved by functionalizing the channel entrances of LTL zeolite with specific tailor-made (stopcock) molecules via a covalent linkage. These molecules plug the channels to avoid the leakage of the guest molecules absorbed inside, as well as connect the inner space of the zeolite with the outside thanks to energy transfer processes, making the coupling of the material with external devices easier.
| S-EPMC5459014 | biostudies-literature
Project description:The integration of solar interfacial evaporation and power generation offers a sustainable solution to address water and electricity scarcity. Although water-power cogeneration schemes are proposed, the existing schemes lack scalability, flexibility, convenience, and stability. These limitations severely limit their future industrial applications. In this study, we prepared a hybrid fabric composed of basalt fibers and cotton yarns with asymmetric structure using textile weaving technology. The cotton yarn in lower layer of fabric facilitates water transport, while the basalt fibers in upper layer enable thermal localization and water supply balancing. The carbon black is deposited on top layer by flame burning to facilitate photothermal conversion. The fabric exhibits a high evaporation rate of 1.52 kg m-2 h-1, which is 3.6 times that of pure water, and an efficiency of 88.06% under 1 kW m-2 light intensity. After assembly with a thermoelectric module, the hybrid system achieves a maximum output power density of 66.73 mW m-2. By exploiting the scalability of fabric, large-scale desalination and power production can be achieved in outdoor environments. This study demonstrates the seamless integration of fabric-based solar evaporation and waste heat-to-energy technologies, thereby providing new avenues for the development of scalable and stable water-power cogeneration systems.
| S-EPMC11615747 | biostudies-literature
Project description:Solar-thermal conversion is considered as a green and simple means to improve the performance of energy storage materials, but often limited by the intrinsic photothermal properties of materials and crude structure design. Herein, inspired by the unique light trapping effect of wide leaf spiral grass during photosynthesis, a biomimetic structural photothermal energy storage system is developed, to further promote the solar thermal-driven pseudo capacitance improvement. In this system, three-dimensional printed tortional Kelvin cell arrays structure with interesting light trapping property functions as "spiral leaf blades" to improve the efficiency of light absorption, while graphene quantum dots/MXene nanohybrids with wide photothermal response range and strong electrochemical activity serve as "chloroplast" for photothermal conversion and energy storage. As expected, the biomimetic structure-enhanced photothermal supercapacitor achieves an ideal solar thermal-driven pseudo capacitance enhancement (up to 304%), an ultrahigh areal capacitance of 10.47 F cm-2 , remarkable photothermal response (surface temperature change of 50.1 °C), excellent energy density (1.18 mWh cm-2 ) and cycling stability (10000 cycles). This work not only offers a novel enhancement strategy for photothermal applications, but also inspires new structure designs for multifunctional energy storage and conversion devices.
| S-EPMC9596846 | biostudies-literature
Project description:Two-dimensional (2D) boron-based materials are receiving much attention as H2 storage media due to the low atomic mass of boron and the stability of decorating alkali metals on the surface, which enhance interactions with H2. This work investigates the suitability of Li, Na, and K decorations on 2D honeycomb borophene oxide (B2O) for H2 storage, using dispersion corrected density functional theory (DFT-D2). A high theoretical gravimetric density of 8.3 wt % H2 is achieved for the Li-decorated B2O structure. At saturation, each Li binds to two H2 with an average binding energy of -0.24 eV/H2. Born-Oppenheimer molecular dynamics simulations at temperatures of 100, 300, and 500 K demonstrate the stability of the Li-decorated structure and the H2 desorption behavior at different temperatures. Our findings indicate that Li-decorated 2D B2O is a promising material for reversible H2 storage and recommend experimental investigation of 2D B2O as a potential H2 storage medium.
| S-EPMC8447184 | biostudies-literature
Project description:The conversion of allergic pollen grains into carbon microstructures was carried out through a facile, one-step, solid-state pyrolysis process in an inert atmosphere. The as-prepared carbonaceous particles were further air activated at 300 °C and then evaluated as lithium ion battery anodes at room (25 °C) and elevated (50 °C) temperatures. The distinct morphologies of bee pollens and cattail pollens are resembled on the final architecture of produced carbons. Scanning Electron Microscopy images shows that activated bee pollen carbon (ABP) is comprised of spiky, brain-like, and tiny spheres; while activated cattail pollen carbon (ACP) resembles deflated spheres. Structural analysis through X-ray diffraction and Raman spectroscopy confirmed their amorphous nature. X-ray photoelectron spectroscopy analysis of ABP and ACP confirmed that both samples contain high levels of oxygen and small amount of nitrogen contents. At C/10 rate, ACP electrode delivered high specific lithium storage reversible capacities (590 mAh/g at 50 °C and 382 mAh/g at 25 °C) and also exhibited excellent high rate capabilities. Through electrochemical impedance spectroscopy studies, improved performance of ACP is attributed to its lower charge transfer resistance than ABP. Current studies demonstrate that morphologically distinct renewable pollens could produce carbon architectures for anode applications in energy storage devices.
| S-EPMC4742870 | biostudies-literature
Project description:Materials can be made strong, but as such they are often brittle and prone to fracture when under stress. Inspired by the exceptionally strong and ductile structure of byssal threads found in certain mussels, we have designed and manufactured a multi-hierarchical steel, based on an inexpensive austenitic stainless steel, which defeats this "conflict" by possessing both superior strength and ductility. These excellent mechanical properties are realized by structurally introducing sandwich structures at both the macro- and nano-scales, the latter via an isometric, alternating, dual-phase crystal phases comprising nano-band austenite and nano-lamellar martensite, without change in chemical composition. Our experiments (transmission and scanning electron microscopy, electron back-scattered diffraction, nano-indentation and tensile tests) and micromechanics simulation results reveal a synergy of mechanisms underlying such exceptional properties. This synergy is key to the development of vastly superior mechanical properties, and may provide a unique strategy for the future development of new super strong and tough (damage-tolerant), lightweight and inexpensive structural materials.
| S-EPMC5865137 | biostudies-literature
Project description:Commercial wearable biosignal sensing technologies encounter challenges associated with irritation or discomfort caused by unwanted objects in direct contact with the skin, which can discourage the widespread adoption of wearable devices. To address this issue, we propose a fabric-based lamina emergent MXene-based electrode, a lightweight and flexible shape-morphing wearable bioelectrode. This work offers an innovative approach to biosignal sensing by harnessing the high electrical conductivity and low skin-to-electrode contact impedance of MXene-based dry electrodes. Its design, inspired by Nesler's pneumatic interference actuator, ensures stable skin-to-electrode contact, enabling robust biosignal detection in diverse situations. Extensive research is conducted on key design parameters, such as the width and number of multiple semicircular legs, the radius of the anchoring frame, and pneumatic pressure, to accommodate a wide range of applications. Furthermore, a real-time wireless electrophysiological monitoring system has been developed, with a signal-to-noise ratio and accuracy comparable to those of commercial bioelectrodes. This work excels in recognizing various hand gestures through a convolutional neural network, ultimately introducing a shape-morphing electrode that provides reliable, high-performance biosignal sensing for dynamic users.
| S-EPMC11446925 | biostudies-literature
Project description:Solar vapor generation through evaporation using photothermal materials is a promising candidate for seawater desalination. The Ti3C2 MXene membrane has exhibited photothermal behavior in solar water evaporation. However, dense packed two-dimensional (2D) MXene membrane with high reflection loss and insufficient vapor escape channels limited its solar evaporation performance. In this work, one-dimensional (1D) multi-walled carbon nanotubes (MWCNT) were added into 2D Ti3C2 nanosheets as the holder to form a 2D/1D hybrid photothermal membrane. Owing to the 2D/1D hybrid structure, more effective broadband solar absorption, water transportation and vapor escape were achieved.
| S-EPMC8839898 | biostudies-literature