Dataset Information

In Situ Wood Fiber Dyeing Through Laccase Catalysis for Fiberboard Production.

ABSTRACT: The aim of the present work was to develop an innovative and environmentally friendly process for wood fiber dyeing and to produce 3-dimensionally fully colored medium-density fiberboard (MDF). The potential of laccase-catalyzed polymerization of selected precursors to form dyes useful in fiberboard manufacturing, a technique used for the first time in this field, was demonstrated. Some of the 7 aromatic compounds tested yielded colored products after laccase treatment under both acid and alkaline conditions, and a good variety of colors was attained by using mixtures of two different monomers. To demonstrate the coloration and design potential of laccase conversion of aromatic compounds, MDFs were enzymatically dyed using an in situ one-step laccase-catalyzed coloration process, and the results were compared against commercial MDFs obtained by using organic coloring agents. Important advantages over conventional processing methods include good color fastness and, in some cases, new hydrophobic properties, allowing designers and woodworkers to explore the beauty of textures and the use of simpler and milder processing conditions that eliminate harsh chemical use and reduce energy consumption.

SUBMITTER: Colella A

PROVIDER: S-EPMC8678495 | biostudies-literature | 2021

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

<i>In Situ</i> Wood Fiber Dyeing Through Laccase Catalysis for Fiberboard Production.

Colella Alberto A De Chiaro Addolorata A Lettera Vincenzo V

Frontiers in bioengineering and biotechnology 20211203

The aim of the present work was to develop an innovative and environmentally friendly process for wood fiber dyeing and to produce 3-dimensionally fully colored medium-density fiberboard (MDF). The potential of laccase-catalyzed polymerization of selected precursors to form dyes useful in fiberboard manufacturing, a technique used for the first time in this field, was demonstrated. Some of the 7 aromatic compounds tested yielded colored products after laccase treatment under both acid and alkali ...[more]

PMID: 34926424

Similar Datasets

Project description:Cationization of cotton is considered to be an effective way to realize salt-free dyeing of reactive dyes. However, applying cotton modified with glycidyltrimethylammonium chloride (GTA) suffers from large consumption of the cationic reagent. One of the reasons is that high crystallinity of cotton fibers hinders the penetration of the reagents into the cellulose interior and limits the reaction between them. This paper designed to use alcohol-water-NaOH system to pretreat the fibers before cationization. With this method, crystallinity of the cotton fibers is decreased and more reactive -OH is exposed, resulting in much higher fiber-reagent reactivity and increased GTA utilization. Influence of alcohol type, alcohol-to-water ratio, and quantity of NaOH on fiber crystallinity and GTA dosage for cationization are all examined. It is found that for achieving 96.0% fixation of C.I. Reactive Black 5 in the absence of salt, GTA dosage can be reduced by half when the fibers are pretreated by alcohol-water-NaOH. Compared with ethanol, n-propanol and isopropanol, tert-butyl alcohol incorporated system shows better performance in increasing fiber reactivity due to their weaker ability to dissolve ions. In this study, XRD and FT-IR are used to demonstrate changes in crystallinity of the fibers after pretreatment. The alteration in micromorphology and hydrophilicity of the pretreated fibers is observed by SEM and water contact angle test, respectively. Furthermore, the alcohol-water-NaOH system can be recycled to show very good repeatability. Notably, all dyed samples pretreated with the system present high color saturation and satisfactory color fastness, especially that the wet rub fastness reaches 4-5 grade, which is one grade higher than that obtained from the conventional dyeing with salt. The above findings prove that alcohol-water-NaOH pretreatment is effective in enhancing reactivity of the cotton fibers and penetrability of the agent, and it shows promising prospects in real application.

Dataset Information

In Situ Wood Fiber Dyeing Through Laccase Catalysis for Fiberboard Production.

Publications

<i>In Situ</i> Wood Fiber Dyeing Through Laccase Catalysis for Fiberboard Production.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets