Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Dataset of propylene carbonate based liquid electrolyte mixtures for sodium-ion cells.

ABSTRACT: In this manuscript, we present rheology, ionic conductivity, density, chromatography, and life cycle analysis data on the PC+X electrolyte system with and without LiClO₄. In particular, the data are presented in contact with Na surfaces. In this case, photographic images of electrolyte-sodium mixtures are also shown. The data was analyzed using OriginPro software to visualize it in an appropriate manner. In our view, the data serve as comparative values, form a basis of a chromatography analysis and are also valuable for modeling. The analysis of the data is presented in the manuscript "Comprehensive characterization of propylene carbonate based liquid electrolyte mixtures for sodium-ion cells" [1].

SUBMITTER: Hofmann A

PROVIDER: S-EPMC8741479 | biostudies-literature | 2022 Feb

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Dataset of propylene carbonate based liquid electrolyte mixtures for sodium-ion cells.

Hofmann Andreas A Wang Zhengqi Z Bautista Sebastian Pinto SP Weil Marcel M Müller Freya F Löwe Robert R Schneider Luca L Mohsin Ijaz Ul IU Hanemann Thomas T

Data in brief 20211230

In this manuscript, we present rheology, ionic conductivity, density, chromatography, and life cycle analysis data on the PC+X electrolyte system with and without LiClO<sub>4</sub>. In particular, the data are presented in contact with Na surfaces. In this case, photographic images of electrolyte-sodium mixtures are also shown. The data was analyzed using OriginPro software to visualize it in an appropriate manner. In our view, the data serve as comparative values, form a basis of a chromatograp ...[more]

PMID: 35028347

Similar Datasets

Experimental dataset on electrolyte mixtures containing fluoroethylene carbonate and lithium bis(trifluoromethanesulfonyl)imide.

Project description:These data and analyses support the research article "Low-flammable electrolytes with fluoroethylene carbonate based solvent mixtures and lithium bis(trifluoromethanesulfonyl)-imide (LiTFSI) for lithium-ion batteries" [1]. The data and analyses presented here include fitted data for density measurements, temperature dependence of density and specific volume of the mixtures, detailed viscosity measurements and conductivity data, current density plots with respect to anodic aluminum dissolution, half-cell C-rate capability of mixtures with the additives used in research article as well as the SEM images and EDX data of the full-cell with the electrolyte selected and controlled.

| S-EPMC6373205 | biostudies-literature

Improving Cyclability of All-Solid-State Batteries via Stabilized Electrolyte-Electrode Interface with Additive in Poly(propylene carbonate) Based Solid Electrolyte.

Project description:In this study, tetraethylene glycol dimethyl ether (TEGDME) is demonstrated as an effective additive in poly(propylene carbonate) (PPC) polymers for the enhancement of ionic conductivity and interfacial stability and a tissue membrane is used as a backbone to maintain the mechanical strength of the solid polymer electrolytes (SPEs). TEGDME in the PPC allows the uniform distribution of conductive LiF species throughout the cathode electrolyte interface (CEI) layer which plays a critically important role in the formation of a stable and efficient CEI. In addition, the high modulus of SPEs suppresses the formation of a protrusion-type CEI on the cathode. The SPE with the optimized TEGDME content exhibits a high ionic conductivity of 0.89 mS cm-1 , an adequate potential stability of up to 4.89 V, and a high Li-ion transference number of 0.81 at 60 °C. Moreover, the Li/SPE/Li cell demonstrates excellent cycling stability for 1650 h, and the Li/SPE/LFP full cell exhibits an initial reversible capacity of 103 mAh g-1 and improved stability over 500 cycles at a rate of 1 C. The TEGDME additive improves the electrochemical properties of the SPEs and promotes the creation of a stable interface, which is crucial for ASSLIBs.

| S-EPMC9069196 | biostudies-literature

High-Mass Loading Hierarchically Porous Activated Carbon Electrode for Pouch-Type Supercapacitors with Propylene Carbonate-Based Electrolyte.

Project description:Rational design and development of the electrodes with high-mass loading yet maintaining the excellent electrochemical properties are significant for a variety of electrochemical energy storage applications. In comparison with the slurry-casted electrode, herein, a hierarchically porous activated carbon (HPAC) electrode with higher mass loading (8.3 ± 0.2 mg/cm2) is successfully prepared. The pouch-type symmetric device (1 cell) with the propylene carbonate-based electrolyte shows the rate capability (7.1 F at 1 mA/cm2 and 4.8 F at 10 mA/cm2) and the cycling stability (83% at 12,000 cycles). On the other hand, an initial discharge capacitance of 32.4 F and the capacitance retention of 96% after 30,000 cycles are delivered from a pouch-type symmetric supercapacitor (five cells). The corresponding electrochemical performances are attributed to the fascinating properties of the HPAC and the synergistic features of the resulting electrode.

| S-EPMC8003487 | biostudies-literature

Modulating ion-dipole interactions in nonflammable phosphonate-based electrolyte for safe and stable sodium-ion pouch cells.

Project description:Phosphonate-based electrolytes with the merits of low cost and intrinsic nonflammability are promising candidates to realize the safe operation of sodium-ion batteries. However, they generally suffer from poor interfacial chemistry because of the solvent-dominated solvation structure induced by the strong ion-dipole interactions between cations and phosphonate molecules. Herein, we report an electrolyte design strategy that selectively improves the competitive coordination of low-solvating-power molecules, achieving stable interfacial chemistry with a non-flammable, low-cost and fluorine-free electrolyte. By improving the ion-ion interaction between cation and anion, weakly coordinated molecules can enter the Na+ solvation shell, thereby promoting more adjustable and advantageous interfacial chemistry. As a result, the fluorine-free Prussian blue||hard carbon pouch cell, with a high cathode mass loading of ∼20 mg cm-2, reaches a high capacity retention with an energy density of over 221.7 Wh kg-1 based on electrode mass and 115.1 Wh kg-1 based on battery mass.

| S-EPMC11843547 | biostudies-literature

A Non-Flammable Zwitterionic Ionic Liquid/Ethylene Carbonate Mixed Electrolyte for Lithium-Ion Battery with Enhanced Safety.

Project description:Today, the requirement for clean, highly efficient, and safe energy seems to be higher and higher due to non-renewable energy and pollution of the environment. At this moment, lithium-ion batteries (LIBs) look like a reliable solution for this dilemma since they have huge energy density. However, the flammability of the conventional electrolyte used in the LIBs is one of critical disadvantages of LIBs, which compromises the safety issue of LIBs. Herein, we reported a non-flammable zwitterionic ionic liquid-based electrolyte named TLPEC, which was fabricated by simply mixing a novel zwitterionic ionic liquid TLP (93 wt%) and ethylene carbonate (EC, 7 wt%). The TLPEC electrolyte exhibited a wide electrochemical potential window of 1.65-5.10 V and a robust ionic conductivity of 1.0 × 10-3 S cm-1 at 20 °C, which renders TLPEC to be a suitable electrolyte for LIBs with enhanced safety performance. The LIBs, with TLPEC as the electrolyte, exhibited an excellent performance in terms of excellent rate capability, cycling stability, and high specific capacity at 25 and 60 °C, which were attributed to the stability and high ionic conductivity of TLPEC electrolyte during cycling as well as the excellent interface compatibility of TLPEC electrolyte with lithium anode.

| S-EPMC8348709 | biostudies-literature

Sulfolane-Based Flame-Retardant Electrolyte for High-Voltage Sodium-Ion Batteries.

Project description:Sodium-ion batteries hold great promise as next-generation energy storage systems. However, the high instability of the electrode/electrolyte interphase during cycling has seriously hindered the development of SIBs. In particular, an unstable cathode-electrolyte interphase (CEI) leads to successive electrolyte side reactions, transition metal leaching and rapid capacity decay, which tends to be exacerbated under high-voltage conditions. Therefore, constructing dense and stable CEIs are crucial for high-performance SIBs. This work reports localized high-concentration electrolyte by incorporating a highly oxidation-resistant sulfolane solvent with non-solvent diluent 1H, 1H, 5H-octafluoropentyl-1, 1, 2, 2-tetrafluoroethyl ether, which exhibited excellent oxidative stability and was able to form thin, dense and homogeneous CEI. The excellent CEI enabled the O3-type layered oxide cathode NaNi1/3Mn1/3Fe1/3O2 (NaNMF) to achieve stable cycling, with a capacity retention of 79.48% after 300 cycles at 1 C and 81.15% after 400 cycles at 2 C with a high charging voltage of 4.2 V. In addition, its nonflammable nature enhances the safety of SIBs. This work provides a viable pathway for the application of sulfolane-based electrolytes on SIBs and the design of next-generation high-voltage electrolytes.

| S-EPMC11489388 | biostudies-literature

A Safer Sodium-Ion Battery Based on Nonflammable Organic Phosphate Electrolyte.

Project description:Sodium-ion batteries are now considered as a low-cost alternative to lithium-ion technologies for large-scale energy storage applications; however, their safety is still a matter of great concern for practical applications. In this paper, a safer sodium-ion battery is proposed by introducing a nonflammable phosphate electrolyte (trimethyl phosphate, TMP) coupled with NaNi0.35Mn0.35Fe0.3O2 cathode and Sb-based alloy anode. The physical and electrochemical compatibilities of the TMP electrolyte are investigated by igniting, ionic conductivity, cyclic voltammetry, and charge-discharge measurements. The results exhibit that the TMP electrolyte with FEC additive is completely nonflammable and has wide electrochemical window (0-4.5 V vs. Na/Na+), in which both the Sb-based anode and NaNi0.35Mn0.35Fe0.3O2 cathode show high reversible capacity and cycling stability, similarly as in carbonate electrolyte. Based on these results, a nonflammable sodium-ion battery is constructed by use of Sb anode, NaNi0.35Mn0.35Fe0.3O2 cathode, and TMP + 10 vol% FEC electrolyte, which works very well with considerable capacity and cyclability, demonstrating a promising prospect to build safer sodium-ion batteries for large-scale energy storage applications.

| S-EPMC5039966 | biostudies-literature

Optimizing the Ion Conductivity and Mechanical Stability of Polymer Electrolyte Membranes Designed for Use in Lithium Ion Batteries: Combining Imidazolium-Containing Poly(ionic liquids) and Poly(propylene carbonate).

Project description:State-of-the-art Li batteries suffer from serious safety hazards caused by the reactivity of lithium and the flammable nature of liquid electrolytes. This work develops highly efficient solid-state electrolytes consisting of imidazolium-containing polyionic liquids (PILs) and lithium bis(trifluoromethane sulfonyl)imide (LiTFSI). By employing PIL/LiTFSI electrolyte membranes blended with poly(propylene carbonate) (PPC), we addressed the problem of combining ionic conductivity and mechanical properties in one material. It was found that PPC acts as a mechanically reinforcing component that does not reduce but even enhances the ionic conductivity. While pure PILs are liquids, the tricomponent PPC/PIL/LiTFSI blends are rubber-like materials with a Young's modulus in the range of 100 MPa. The high mechanical strength of the material enables fabrication of mechanically robust free-standing membranes. The tricomponent PPC/PIL/LiTFSI membranes have an ionic conductivity of 10-6 S·cm-1 at room temperature, exhibiting conductivity that is two orders of magnitude greater than bicomponent PPC/LiTFSI membranes. At 60 °C, the conductivity of PPC/PIL/LiTFSI membranes increases to 10-5 S·cm-1 and further increases to 10-3 S·cm-1 in the presence of plasticizers. Cyclic voltammetry measurements reveal good electrochemical stability of the tricomponent PIL/PPC/LiTFSI membrane that potentially ranges from 0 to 4.5 V vs. Li/Li+. The mechanically reinforced membranes developed in this work are promising electrolytes for potential applications in solid-state batteries.

| S-EPMC10855450 | biostudies-literature

Sodium Borates: Expanding the Electrolyte Selection for Sodium-Ion Batteries.

Project description:Sodium-ion batteries (SIBs) are a promising grid-level storage technology due to the abundance and low cost of sodium. The development of new electrolytes for SIBs is imperative since it impacts battery life and capacity. Currently, sodium hexafluorophosphate (NaPF6 ) is used as the benchmark salt, but is highly hygroscopic and generates toxic HF. This work describes the synthesis of a series of sodium borate salts, with electrochemical studies revealing that Na[B(hfip)4 ]⋅DME (hfip=hexafluoroisopropyloxy, Oi PrF ) and Na[B(pp)2 ] (pp=perfluorinated pinacolato, O2 C2 (CF3 )4 ) have excellent electrochemical performance. The [B(pp)2 ]- anion also exhibits a high tolerance to air and water. Both electrolytes give more stable electrode-electrolyte interfaces than conventionally used NaPF6 , as demonstrated by impedance spectroscopy and cyclic voltammetry. Furthermore, they give greater cycling stability and comparable capacity to NaPF6 for SIBs, as shown in commercial pouch cells.

| S-EPMC9401571 | biostudies-literature

Opportunities and Limitations of Ionic Liquid- and Organic Carbonate Solvent-Based Electrolytes for Mg-Ion-Based Dual-Ion Batteries.

Project description:Dual-ion batteries (DIBs) offer a great alternative to state-of-the-art lithium-ion batteries, based on their high promises due to the absence of transition metals and the use of low-cost materials, which could make them economically favorable targeting stationary energy storage applications. In addition, they are not limited by certain metal cations, and DIBs with a broad variety of utilized ions could be demonstrated over the last years. Herein, a systematic study of different electrolyte approaches for Mg-ion-based DIBs was conducted. A side-by-side comparison of Li- and Mg-ion-based electrolytes using activated carbon as negative electrode revealed the opportunities but also limitations of Mg-ion-based DIBs. Ethylene sulfite was successfully introduced as electrolyte additive and increased the specific discharge capacity significantly up to 93±2 mAh g-1 with coulombic efficiencies over 99 % and an excellent capacity retention of 88 % after 400 cycles. In addition, and for the first time, highly concentrated carbonate-based electrolytes were employed for Mg-ion-based DIBs, showing adequate discharge capacities and high coulombic efficiencies.

| S-EPMC8596887 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data