Evaluation of Aerosol Particle Leak and Standard Surgical Mask Fit With 3 Elastomeric Harness Designs.
Ontology highlight
ABSTRACT:
SUBMITTER: Ingabire J
PROVIDER: S-EPMC8804914 | biostudies-literature | 2022 Jan
REPOSITORIES: biostudies-literature
Publications
Evaluation of Aerosol Particle Leak and Standard Surgical Mask Fit With 3 Elastomeric Harness Designs.
Ingabire Jeannette J McKenney Hannah H Sebesta Charles C Badhiwala Krishna K Kemere Caleb C Kapur Sahil S Robinson Jacob T JT
JAMA network open 20220104 1
Similar Datasets
Project description:IntroductionDuring the course of the COVID-19 pandemic, there have been suggestions that various techniques could be employed to improve the fit and, therefore, the effectiveness of face masks. It is well recognized that improving fit tends to improve mask effectiveness, but whether these fit modifiers are reliable remains unexplored. In this study, we assess a range of common "fit hacks" to determine their ability to improve mask performance.MethodsBetween July and September 2020, qualitative fit testing was performed in an indoor living space. We used quantitative fit testing to assess the fit of both surgical masks and KN95 masks, with and without 'fit hacks', on four participants. Seven fit hacks were evaluated to assess impact on fit. Additionally, one participant applied each fit hack multiple times to assess how reliable hacks were when reapplied. A convenience of four participants took part in the study, three females and one male with a head circumference range of 54 to 60 centimetres.Results and discussionThe use of pantyhose, tape, and rubber bands were effective for most participants. A pantyhose overlayer was observed to be the most effective hack. High degrees of variation were noted between participants. However, little variation was noted within participants, with hacks generally showing similar benefit each time they were applied on a single participant. An inspection of the fit hacks once applied showed that individual facial features may have a significant impact on fit, especially the nose bridge.ConclusionsFit hacks can be used to effectively improve the fit of surgical and KN95 masks, enhancing the protection provided to the wearer. However, many of the most effective hacks are very uncomfortable and unlikely to be tolerated for extended periods of time. The development of effective fit-improvement solutions remains a critical issue in need of further development.
| S-EPMC8809580 | biostudies-literature
Project description: Not available
| S-EPMC7097838 | biostudies-literature
Project description:This study introduces a customized mask retainer to improve the fit performance of surgical masks using various advanced digital techniques. The participant's 3D face scans with and without a surgical mask were taken by using a smartphone. The mask retainer was designed using the 3D face scan data based on the facial anthropometric landmarks. The fitting was inspected and adjusted using the masked face scan data. The retainer was fabricated using a 3D printer. The effectiveness of the retainer on the augmentation of the fit of the surgical mask was tested according to the Chinese Standard (GB 19083-2010). A questionnaire was used to assess the effect of wearing surgical masks with and without retainers and N95 respirators on subjective perception of discomfort. The effectiveness test of the retainer on the augmentation of the fit performance showed a better than 25-fold increase in the overall fit factor, meeting the fit requirement for KN95 respirators in China. The subjective perception of discomfort of wearing N95 was significantly greater than surgical mask with and without retainers. The fit factor results indicated that by using the retainer, the overall fit factors and that of each exercise significantly increased compared to that of the group with the surgical mask alone. And compared with N95, the surgical mask with the retainer significant improved comfort. The surgical mask with the retainer can provide an alternative of personal protective equipment for healthcare workers.
| S-EPMC9733890 | biostudies-literature
Project description:Wearing surgical masks or other similar face coverings can reduce the emission of expiratory particles produced via breathing, talking, coughing, or sneezing. Although it is well established that some fraction of the expiratory airflow leaks around the edges of the mask, it is unclear how these leakage airflows affect the overall efficiency with which masks block emission of expiratory aerosol particles. Here, we show experimentally that the aerosol particle concentrations in the leakage airflows around a surgical mask are reduced compared to no mask wearing, with the magnitude of reduction dependent on the direction of escape (out the top, the sides, or the bottom). Because the actual leakage flowrate in each direction is difficult to measure, we use a Monte Carlo approach to estimate flow-corrected particle emission rates for particles having diameters in the range 0.5-20 μm. in all orientations. From these, we derive a flow-weighted overall number-based particle removal efficiency for the mask. The overall mask efficiency, accounting both for air that passes through the mask and for leakage flows, is reduced compared to the through-mask filtration efficiency, from 93 to 70% for talking, but from only 94-90% for coughing. These results demonstrate that leakage flows due to imperfect sealing do decrease mask efficiencies for reducing emission of expiratory particles, but even with such leakage surgical masks provide substantial control.
| S-EPMC8187651 | biostudies-literature
Project description:Wearing a surgical/procedure mask over high-flow nasal cannula (HFNC) reduces aerosol particle concentrations in the patients' vicinity. Wearing a mask over HFNC should be encouraged to reduce risks of aerosol transmission. #COVID19 https://bit.ly/2HLg5cE.
| S-EPMC7607969 | biostudies-literature
Project description:Effective masking policies to prevent the spread of airborne infections depend on public access to masks with high filtration efficacy. However, poor face-fit is almost universally present in pleated multilayer disposable face masks, severely limiting both individual and community respiratory protection. We developed a set of simple mask modifications to mass-manufactured disposable masks, the most common type of mask used by the public, that dramatically improves both their personalized fit and performance in a low-cost and scalable manner. These modifications comprise a user-moldable full mask periphery wire, integrated earloop tension adjusters, and an inner flange to trap respiratory droplets. We demonstrate that these simple design changes improve quantitative fit factor by 320%, triples the level of protection against aerosolized droplets, and approaches the model efficacy of N95 respirators in preventing the community spread of COVID-19, for an estimated additional cost of less than 5 cents per mask with automated production.
| S-EPMC10016631 | biostudies-literature
Project description:BackgroundDuring the COVID-19 pandemic, face masks are used as source control devices to reduce the expulsion of respiratory aerosols from infected people. Modifications such as mask braces, earloop straps, knotting and tucking, and double masking have been proposed to improve mask fit however the data on source control are limited.MethodsThe effectiveness of mask fit modifications was determined by conducting fit tests on human subjects and simulator manikins and by performing simulated coughs and exhalations using a source control measurement system.ResultsMedical masks without modification blocked ≥56% of cough aerosols and ≥42% of exhaled aerosols. Modifying fit by crossing the earloops or placing a bracket under the mask did not increase performance, while using earloop toggles, an earloop strap, and knotting and tucking the mask increased performance. The most effective modifications for improving source control performance were double masking and using a mask brace. Placing a cloth mask over a medical mask blocked ≥85% of cough aerosols and ≥91% of exhaled aerosols. Placing a brace over a medical mask blocked ≥95% of cough aerosols and ≥99% of exhaled aerosols.ConclusionsFit modifications can greatly improve the performance of face masks as source control devices for respiratory aerosols.
| S-EPMC8674119 | biostudies-literature
Project description:BackgroundDuring public health emergencies, demand for N95 filtering facepiece respirators (N95 FFRs) can outpace supply. Elastomeric half-mask respirators (EHMRs) are a potential alternative that are reusable and provide the same or higher levels of protection. This study sought to examine the practical aspects of EHMR use among health care personnel (HCP).MethodsBetween September and December 2021, 183 HCPs at 2 tertiary referral centers participated in this 3-month EHMR deployment, wearing the EHMR whenever respiratory protection was required according to hospital protocols (ie, when an N95 FFR would typically be worn) and responding to surveys about their experience.ResultsParticipants wore EHMRs typically 1 to 3 hours per shift, reported disinfecting the respirator after 85% of the removals, and reported high confidence in using the EHMR following the study. EHMRs caused minimal interference with patient care tasks, though they did inhibit communication.DiscussionHCP who had not previously worn an EHMR were able to wear it as an alternative to an N95 FFR without much-reported interference with their job tasks and with high disinfection compliance.ConclusionsThis study highlights the feasibility of the deployment of EHMRs during a public health emergency when an alternative respirator option is necessary.
| S-EPMC11522955 | biostudies-literature
Project description: Not available
| S-EPMC7318975 | biostudies-literature
Project description:BackgroundElastomeric half-mask respirators (EHMR) reduce health care workers' exposure to airborne hazards including bioaerosols but have primarily been used in the industrial setting.PurposeTo assess health care workers' perceptions, attitudes, and experiences wearing EHMRs in a clinical environment.MethodsEmployees within a single health care system who wore the EHMR continuously during their shift completed an investigator developed survey. Descriptive statistics and thematic analysis were used.ResultsOf the 8273 EHMR "fit-tested" eligible employees, 1478 met inclusion criteria and participated. Respondents reported that they felt well protected with the EHMR and confident in their care and maintenance of the EHMR. Although skin changes developed, they were primarily managed by adjusting the straps. Clarity of communication was a concern across all respondents and disciplines.ConclusionsThe EHMR was preferred over reusing the N95 although clarity in communication was challenging.
| S-EPMC10655906 | biostudies-literature