Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

RAFT Copolymerization of Vinyl Acetate and Acrylic Acid in the Selective Solvent.

ABSTRACT: Reversible addition-fragmentation chain transfer polymerization was successfully applied to the synthesis of the gradient copolymer of acrylic acid and vinyl acetate in the selective solvent. The gradient degree of the copolymer was varied by the monomer feed. The monomer conversion was found to affect the ability of the copolymer to self-assemble in aqueous solutions in narrowly dispersed micelles with an average hydrodynamic radius of about 250 nm. Furthermore, the synthesized copolymers also tended to self-assemble throughout copolymerization in the selective solvent.

SUBMITTER: Kozhunova EY

PROVIDER: S-EPMC8838437 | biostudies-literature | 2022 Jan

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

RAFT Copolymerization of Vinyl Acetate and Acrylic Acid in the Selective Solvent.

Kozhunova Elena Yu EY Plutalova Anna V AV Chernikova Elena V EV

Polymers 20220129 3

Reversible addition-fragmentation chain transfer polymerization was successfully applied to the synthesis of the gradient copolymer of acrylic acid and vinyl acetate in the selective solvent. The gradient degree of the copolymer was varied by the monomer feed. The monomer conversion was found to affect the ability of the copolymer to self-assemble in aqueous solutions in narrowly dispersed micelles with an average hydrodynamic radius of about 250 nm. Furthermore, the synthesized copolymers also ...[more]

PMID: 35160544

Similar Datasets

Control over the relative reactivities of monomers in RAFT copolymerization of styrene and acrylic acid.

Project description:The relative monomer reactivities in the reversible addition-fragmentation chain transfer (RAFT) radical copolymerization of styrene (S) and acrylic acid (AA) in a solution of the polar solvent N,N-dimethylformamide are found to be dependent on the chemical nature of the RAFT agent. Polymeric RAFT agents based on polyacrylic acid enhance the difference in monomer reactivities (dithiobenzoate - r AA = 0.09 ± 0.02, r S = 3.5 ± 1.2, trithiocarbonate - r AA = 0.08 ± 0.04, r S = 3.03 ± 1.78) compared to low molecular weight RAFT agents (dibenzyl dithiobenzoate - r AA = 0.14 ± 0.01, r S = 1.00 ± 0.01, dibenzyl trithiocarbonate - r AA = 0.08 ± 0.01, r S = 0.85 ± 0.03). The opposite effect on the relative reactivity of acrylic acid is observed when polymeric RAFT agents based on polystyrene are used (dithiobenzoate - r AA = 3.3 ± 0.4, r S = 0.72 ± 0.05, trithiocarbonate - r AA = 0.11 ± 0.01, r S = 0.54 ± 0.03). In all the investigated systems the copolymers formed are characterized by narrow MWD due to the high efficiency of the chosen RAFT agents.

| S-EPMC9080008 | biostudies-literature

Bis(formylphenolato)cobalt(II)-Mediated Alternating Radical Copolymerization of tert-Butyl 2-Trifluoromethylacrylate with Vinyl Acetate.

Project description:The organometallic-mediated radical polymerization (OMRP) of vinyl acetate (VAc) and its OMR copolymerization (OMRcoP) with tert-butyl 2-trifluoromethylacrylate (MAF-TBE) mediated by Co(SAL)₂ (SAL = 2-formylphenolato or deprotonated salicylaldehyde) produced relatively well-defined PVAc and poly(VAc-alt-MAF-TBE) copolymers at moderate temperature (<40 °C) in bulk. The resulting alternating copolymer was characterized by ¹H-, 13C- and 19F-nuclear magnetic resonance (NMR) spectroscopies, and by size exclusion chromatography. The linear first-order kinetic plot, the linear evolutions of the molar mass with total monomer conversion, and the relatively low dispersity (Đ~1.55) of the resulting copolymers suggest that this cobalt complex provides some degree of control over the copolymerization of VAc and MAF-TBE. Compared to the previously investigated cobalt complex OMRP mediators having a fully oxygen-based first coordination sphere, this study emphasizes a few peculiarities of Co(SAL)₂: a lower ability to trap radical chains as compared to Co(acac)₂ and the absence of catalytic chain transfer reactions, which dominates polymerizations carried in the presence of 9-oxyphenalenone cobalt derivative.

| S-EPMC6418862 | biostudies-literature

Solvent-free electrically conductive Ag/ethylene vinyl acetate (EVA) composites for paper-based printable electronics.

Project description:Solvent-free electrically conductive composites have been applied to flexible electronics to obtain high electrical conductivity. However, some of the proposed composites have low electrical conductivities and are unable to meet the requirements of commercial printable electronics. In this study, solvent-free electrically conductive Ag/EVA (ethylene vinyl acetate) composites for paper-based printable electronics were prepared by a thermal melting method. The properties of these electrically conductive Ag/EVA composites, including particle sizes, morphologies and phase purities of the flake silver flake powders, were investigated using a particle size analyzer, scanning electron microscopy (SEM) and X-ray diffraction (XRD), respectively. The results showed that nanometer-thick flake silver flake powders with smooth and flat surfaces were made by the nanofilm transition technique. These obtained powders were able to form smooth face-to-face contacts, which facilitated the formation of an excellent conductive network in the conductive system. Dynamic mechanical analysis (DMA) was conducted to investigate the mechanical properties of EVA and Ag/EVA composites. A Fourier transformation infra-red (FTIR) spectrometer, laser micro-Raman spectrometer and thermogravimetric analyzer were used to analyze the organic functional groups, glass transition temperatures and thermal weight losses of the EVA resin and solvent-free electrically conductive composites. The solvent-free electrically conductive Ag/EVA composite, which contained 55 wt% of the as-prepared flake silver flake powders, was found to have an extremely low volume resistivity of 1.23 × 10-4 Ω cm as well as excellent bending performance and adhesion. These features indicate the great potential of these composites for application in printed electronics.

| S-EPMC9065322 | biostudies-literature

Effect of pH on the Poly(acrylic acid)/Poly(vinyl alcohol)/Lysozyme Complexes Formation.

Project description:The interactions between poly(acrylic acid) (PAA), poly(vinyl alcohol) (PVA), and lysozyme (Lys) in an aqueous environment at pHs of 2, 4, and 7.4 were discussed considering the experimental data obtained by turbidimetry, electrokinetic and rheological measurements, and FTIR analysis. It was found that the increase in PAA amount reduces the coacervation zone by shifting the critical pHcr1to higher values while the critical pHcr2 remains unchanged. The coacervation zone extended from 3.1-4.2 to 2.9-4.7 increasing the Lys concentration from 0.2% to 0.5%. The zeta potential measurements showed that the PAA-PVA-Lys mixture in water is the most stable in the pH range of 4.5-8. Zero shear viscosity exhibited deviations from additivity at both investigated pHs, and a maximum value corresponding to a maximum hydrodynamic volume was revealed at PAA weight fractions of 0.4 and 0.5 for pHs of 4 and 7.4, respectively. The binding affinity to Lys of PAA, established by molecular dynamics simulation, was slightly higher than that of PVA. The more stable complex was PAA-Lys formed in a very acidic environment; for that, a binding affinity of -7.1 kcal/mol was determined.

| S-EPMC10780248 | biostudies-literature

Vinyl ethers and epoxides photoinduced copolymerization with perfluoropolyalkylether monomers.

Project description:New perfluoropolyalkylether (PFPAE) monomers, chain extended with different alkyl groups and functionalized with vinyl ether or epoxide end-groups, were employed, together with trimethylolpropane trivinyl ether or trimethylolpropane triglycidyl ether, to produce fluorinated copolymers. The photoinduced cationic polymerization was investigated, and the PFPAE-based copolymer properties were thoroughly characterized. Interesting surface properties and two different values of refractive index were observed: thus, these fluorinated copolymers can be suitable materials for the manufacture of self-cleaning coatings and optical waveguides.

| S-EPMC7952294 | biostudies-literature

Influence of redox initiator component ratios on the emulsion copolymerisation of vinyl acetate and neodecanoic acid vinyl ester.

Project description:Redox initiated emulsion polymerisation of vinyl acetate and neodecanoic acid vinyl ester was investigated at temperatures ranging from -1 °C to 87 °C (initiation temperature between -1 °C and 60 °C), using varying molar ratios of the following redox components: l-ascorbic acid, tert-butyl hydroperoxide and ammonium iron(iii) sulfate dodecahydrate as a catalyst. The high flexibility of redox initiators enables product properties, as well as space-time-yield, to be adjusted as required. Polymers being products by process, it was presumed that modifying the conversion rate would lead to a different product. However, it was shown that the reaction rate is adjustable by varying the catalyst amount without changing the product properties, such as molecular weight, particle size, glass transition temperature and polymer structure, while reducing the overall process time by 40-86% (at equimolar ratios of reducing and oxidising agent). In contrast, variation of the tert-butyl hydroperoxide content resulted in changes of the molecular weight. The influence of the initiation temperature and of the redox system on the reaction rate was determined, enabling control over the reaction rate in the whole temperature range. Meanwhile, overall process times of approximately 2-240 min and high conversions of 90-99% could be achieved. Statistical modelling confirmed the results and facilitated predictions, enabling the conversion rate to be adjusted to the desired properties. The possibility of being able to adjust the conversion rate and product properties independently of each other creates additional degrees of freedom in process design.

| S-EPMC9092359 | biostudies-literature

Mechanistic Studies for Palladium Catalyzed Copolymerization of Ethylene with Vinyl Ethers.

Project description:The mechanism of ethylene with vinyl ether (VE, CH2=CHOEt) copolymerization catalyzed by phosphine-sulfonate palladium complex (A) was investigated by density functional theory (DFT) calculation. On achieving an agreement between theory and experiment, it is found that the favorable 1,2-selective insertion of VE into the complex A originates from stronger hydrogen interaction between the oxygen atom of VE and the ancillary ligand of catalyst A. Additionally, VE insertion is easier into the ethylene pre-inserted intermediate than that into the catalyst to form the resultant copolymers with the major units of OEt in chain and minor units of OEt at the chain end. The effect of β-OEt and β-H elimination was explored to elucidate chain termination and the molecular weight of copolymers. Furthermore, a family of cationic catalysts has been demonstrated to copolymerize ethylene with VE along with our modified cationic complex B with higher incorporation of VE and reactivity in comparison with complex A, which was modelled computationally by increasing the strong interactions between the catalyst and monomer moiety. Other than VE, the activity of cationic complex B for copolymerization of vinyl chloride and methacrylate is also computed successfully.

| S-EPMC7603233 | biostudies-literature

Binary Graft of Poly(acrylic acid) and Poly(vinyl pyrrolidone) onto PDMS Films for Load and Release of Ciprofloxacin.

Project description:Polymers are versatile compounds which physical and chemical properties can be taken advantage of in wide applications. Particularly, in the biomedical field, polydimethylsiloxane (PDMS) is one of the most used for its high biocompatibility, easy manipulation, thermal, and chemical stability. Nonetheless, its hydrophobic nature makes it susceptible to bacterial pollution, which represents a disadvantage in this field. A potential solution to this is through the graft of stimuli-sensitive polymers that, besides providing hydrophilicity, allow the creation of a drug delivery system. In this research, PDMS was grafted with acrylic acid (AAc) and vinyl pyrrolidone (VP) in two steps using gamma radiation. The resulting material was analyzed by several characterization techniques such as infrared spectroscopy (FTIR), swelling, contact angle, critical pH, and thermogravimetric analysis (TGA), demonstrating the presence of both polymers onto PDMS films and showing hydrophilic and pH-response properties. Among the performed methods to graft, the loading and release of ciprofloxacin were successful in those samples obtained by direct irradiation method. Furthermore, the antimicrobial assays showed zones of inhibition for microorganisms such as Staphylococcus aureus and Escherichia coli.

| S-EPMC9861813 | biostudies-literature

Copolymerization of Ethylene and Vinyl Fluoride by Self-Assembled Multinuclear Palladium Catalysts.

Project description:The self-assembled multinuclear PdII complexes {(Li-OPOOMe2)PdMe(4-5-nonyl-pyridine)}4Li2Cl2 (C, Li-OPOOMe2 = PPh(2-SO3Li-4,5-(OMe)2-Ph)(2-SO3--4,5-(OMe)2-Me-Ph)), {(Zn-OP-P-SO)PdMe(L)}4 (D, L = pyridine or 4-tBu-pyridine, [OP-P-SO]3- = P(4-tBu-Ph)(2-PO32--5-Me-Ph)(2-SO3--5-Me-Ph)), and {(Zn-OP-P-SO)PdMe(pyridine)}3 (E) copolymerize ethylene and vinyl fluoride (VF) to linear copolymers. VF is incorporated at levels of 0.1-2.5 mol% primarily as in-chain -CH2CHFCH2- units. The molecular weight distributions of the copolymers produced by D and E are generally narrower than for catalyst C, which suggests that the Zn-phosphonate cores of D and E are more stable than the Li-sulfonate-chloride core of C under copolymerization conditions. The ethylene/VF copolymerization activities of C-E are over 100 times lower and the copolymer molecular weights (MWs) are reduced compared to the results for ethylene homopolymerization by these catalysts.

| S-EPMC7407146 | biostudies-literature

Polymer Electrolyte Membranes Prepared by Graft Copolymerization of 2-Acrylamido-2-Methylpropane Sulfonic Acid and Acrylic Acid on PVDF and ETFE Activated by Electron Beam Treatment.

Project description:Polymer electrolyte membranes (PEM) for potential applications in fuel cells or vanadium redox flow batteries were synthesized and characterized. ETFE (poly (ethylene-alt-tetrafluoroethylene)) and PVDF (poly (vinylidene fluoride)) serving as base materials were activated by electron beam treatment with doses ranging from 50 to 200 kGy and subsequently grafted via radical copolymerization with the functional monomers 2-acrylamido-2-methylpropane sulfonic acid and acrylic acid in aqueous phase. Since protogenic groups are already contained in the monomers, a subsequent sulfonation step is omitted. The mechanical properties were studied via tensile strength measurements. The electrochemical performance of the PEMs was evaluated by electrochemical impedance spectroscopy and fuel cell tests. The proton conductivities and ion exchange capacities are competitive with Nafion 117, the standard material used today.

| S-EPMC6680964 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data