Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Soluble Poly(amide-imide)s from Diamide-Diamine Monomer with Trifluoromethyl Groups.

ABSTRACT: A series of soluble aromatic poly(amide-imide)s (PAIs) was prepared from a new diamide-diamine monomer having biphenyl units with two CF3 groups. The diamide-diamine monomer was polymerized with 2,2'-bis(trifluoromethyl)benzidine and pyromelltic dianhydride through an imidization reaction to prepare PAIs with a controlled imide/amide bond ratio in the main chains. While the PAIs with the highest imide bond content showed a limited solubility, other PAIs were soluble in polar organic solvents and can be solution-cast into flexible freestanding films. All PAIs exhibited high thermal stability with 5% weight loss temperature (Td5) from 464 to 497 °C in air, and no appearance of glass transition up to 400 °C. Notably, the linear coefficient of thermal expansion (CTE) value of the PAI films was linearly decreased with the imide bond content and varied from 44.8 to 7.8 ppm/°C.

SUBMITTER: Byun T

PROVIDER: S-EPMC8840246 | biostudies-literature | 2022 Feb

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Soluble Poly(amide-imide)s from Diamide-Diamine Monomer with Trifluoromethyl Groups.

Byun Taejoon T Kim Seong Jong SJ Kim Sang Youl SY

Polymers 20220206 3

A series of soluble aromatic poly(amide-imide)s (PAIs) was prepared from a new diamide-diamine monomer having biphenyl units with two CF<sub>3</sub> groups. The diamide-diamine monomer was polymerized with 2,2'-bis(trifluoromethyl)benzidine and pyromelltic dianhydride through an imidization reaction to prepare PAIs with a controlled imide/amide bond ratio in the main chains. While the PAIs with the highest imide bond content showed a limited solubility, other PAIs were soluble in polar organic s ...[more]

PMID: 35160615

Similar Datasets

Highly Transparent Aromatic Polyamides from Unsymmetrical Diamine with Trifluoromethyl Groups.

Project description:Soluble and transparent wholly aromatic polyamides (PAs) were synthesized from an unsymmetrical diamine monomer having trifluoromethyl (CF3) groups, 4-(4'-aminophenoxy)-3,5-bis(trifluoromethyl)aniline. The monomer was polymerized with several dicarboxylic acid monomers via the Yamazaki-Higashi polycondensation method. All of the synthesized polyamides have an amorphous morphology, and they are soluble in many polar organic solvents at room temperature. Flexible and transparent films of the polyamides were prepared by solution casting and these polymer films show good optical transparencies with cut-off wavelengths of 337-367 nm and transparencies of 88%-90% at 550 nm. In addition, all the polymers were thermally stable over 400 °C and exhibited glass transition temperatures (Tg) higher than 300 °C. Unsymmetrically inserted trifluoromethyl groups on polyamides improves the solubility as well as the transparency of the polymers while maintaining good thermal properties. They also showed low refractive indices around 1.5333~1.5833 at 633 nm owing to the existence of low polarizable trifluoromethyl groups.

| S-EPMC8840359 | biostudies-literature

Poly(amide-imide) materials for transparent and flexible displays.

Project description:The key component currently missing for the next generation of transparent and flexible displays is a high-performance polymer material that is flexible, while showing optical and thermal properties of glass. It must be transparent to visible light and show a low coefficient of thermal expansion (CTE). While specialty plastics such as aromatic polyimides are promising, reducing their CTE and improving transparency simultaneously proved challenging, with increasing coloration the main problem to be resolved. We report a new poly(amide-imide) material that is flexible and displays glass-like behavior with a CTE value of 4 parts per million/°C. This novel polymer was successfully used as a substrate to fabricate transparent and flexible indium-gallium-zinc oxide thin-film transistors.

| S-EPMC6203221 | biostudies-literature

Designing Imidazolium Poly(amide-amide) and Poly(amide-imide) Ionenes and Their Interactions with Mono- and Tris(imidazolium) Ionic Liquids.

Project description:Here we introduce the synthesis and thermal properties of a series of sophisticated imidazolium ionenes with alternating amide-amide or amide-imide backbone functionality, and investigate the structural effects of mono(imidazolium) and unprecedented tris(imidazolium) ionic liquids (ILs) in these ionenes. The new set of poly(amide-amide) (PAA) and poly(amide-imide) (PAI) ionenes represent the intersection of conventional high-performance polymers with the ionene archetype-presenting polymers with alternating functional and ionic elements precisely sequenced along the backbone. The effects of polymer composition on the thermal properties and morphology were analyzed. Five distinct polymer backbones were synthesized and combined with a stoichiometric equivalent of the IL 1-benzyl-3-methylimidazolium bistriflimide ([Bnmim][Tf2N]), which were studied to probe the self-assembly, structuring, and contributions of intermolecular forces when IL is added. Furthermore, three polyamide (PA) or polyimide (PI) ionenes with simpler xylyl linkages were interfaced with [Bnmim][Tf2N] as well as a novel amide-linked tris(imidazolium) IL, to demonstrate the structural changes imparted by the inclusion of functional, ionic additives dispersed within the ionene matrix. This work highlights the possibilities for utilizing concepts from small molecules which exhibit supramolecular self-assembly to guide creative design and manipulate the structuring of ionenes.

| S-EPMC7362236 | biostudies-literature

Effects of diamine isomers on the properties of colorless and transparent copoly(amide imide)s.

Project description:To fully understand the structure-property relationship of aromatic copoly(amide-imide)s (Co-PAIs) and determine which factors lead to chain rigidity, we prepared two series of Co-PAIs. They were synthesized from two types of amine monomers containing m- and p-isomers and different ratios of 4,4'-(hexafluoroiso-propylidene)diphthalic anhydride (6FDA) and 4,4'-biphthalic anhydride (BPA). m-Substituted and p-substituted N,N'-[2,2'-bis(trifluoromethyl)-4,4'-biphenylene]bis(aminobenzamide) (MPAB) diamine isomers were synthesized from 3- and 4-nitrobenzoyl chloride and 2,2'-bis(trifluoromethyl) benzidine (TFB), respectively. The Co-PAI films were synthesized from poly(amic acid) (PAA), via solution-casting, followed by thermal imidizations. The thermal- and mechanical-properties and optical transparency of the Co-PAI films with different BPA monomer contents were investigated. We also investigated the effects of the different MPAB isomers on the Co-PAI structures. Compared with the m-substituted MPAB Co-PAI films, the p-substituted MPAB Co-PAI films have superior thermo-mechanical properties at the same monomer content. However, the optical transparencies of the m-MPAB Co-PAIs are slightly better than those of the p-MPAB Co-PAIs.

| S-EPMC9041123 | biostudies-literature

A Highly Hydrophilic and Biodegradable Novel Poly(amide-imide) for Biomedical Applications.

Project description:A novel biodegradable poly(amide-imide) (PAI) with good hydrophilicity was synthesized by incorporation of l-glycine into the polymer chain. For comparison purposes, a pure PAI containing no l-glycine was also synthesized with a three-step method. In this study, we evaluated the novel PAI's thermal stability, hydrophilicity, solubility, biodegradability and ability to support bone marrow mesenchymal stem cell (BMSC) adhesion and growth by comparing with the pure PAI. The hydrophilic tests demonstrated that the novel PAI has possible hydrophilicity at a 38° water contact angle on the molecule surface and is about two times more hydrophilic than the pure PAI. Due to an extra unit of l-glycine in the novel PAI, the average degradation rate was about 2.4 times greater than that of the pure PAI. The preliminary biocompatibility studies revealed that all the PAIs are cell compatible, but the pure PAI exhibited much lower cell adhesion than the l-glycine-incorporated novel PAI. The hydrophilic surface of the novel PAI was more suitable for cell adhesion, suggesting that the surface hydrophilicity plays an important role in enhancing cell adhesion and growth.

| S-EPMC6432413 | biostudies-literature

Low Dielectric Poly(imide siloxane) Films Enabled by a Well-Defined Disiloxane-Linked Alkyl Diamine.

Project description:This paper presents an efficient pathway to achieve the dielectric constant as low as 2.48 @ 25 °C, 1 MHz for nonporous poly(imide siloxane) films with mechanical and thermal robustness. A symmetric disiloxane-linked alkyl diamine, bis(aminopropyl)tetramethyldisiloxane (BATMS) with a well-defined molecular formula NH2CH2CH2CH2Si(CH3)2OSi(CH3)2CH2CH2CH2NH2, has been used to controllably reduce the dielectric constant of the polymer films by adjusting the loading of BATMS. The thermal stability of all the polymer films remains robust with T 5 and T 10 no less than 458 and 472 °C, respectively, while the glass-transition temperature decreases with increasing incorporation of flexible disiloxane-alkyl segments into a polymer backbone. There exists a consistent regularity between the thermal, optical, and dielectric properties with the loading amount of BATMS in the polymer films, inferring that the disiloxane-alkyl segments are homogeneously distributed in the polymer backbone. Charge-transfer complex inhibition of polymer films by disiloxane segments has been revealed by an enlarged d-spacing in wide-angle X-ray diffraction spectra and a blue shift in film fluorescence emission spectra. The combined low dielectric constant, robust mechanical and thermal stability, and improved hydrophobicity make the series of BATMS-resulting poly(imide siloxane) films promising candidates for sophisticated flexible microelectronic application.

| S-EPMC6933767 | biostudies-literature

Dynamic Polyamide Networks via Amide-Imide Exchange.

Project description:The diamide-imide equilibrium was successfully exploited for the synthesis of dynamic covalent polymer networks in which a dissociative bond exchange mechanism leads to high processibility at temperatures above ≈110 °C. Dynamic covalent networks bridge the gap between thermosets and thermoplastic polymers. At the operating temperature, when the network is fixed, dynamic covalent networks are elastic solids, while at high temperatures, chemical exchange reactions turn the network into a processible viscoelastic material. Upon heating a dissociative network, the viscosity may also decrease due to a shift of the chemical equilibrium; in such materials, the balance between processibility and excessive flow is important. In this study, a network is prepared that upon heating to above ≈110 °C dissociates to a significant extent due to a shift in the amide-imide equilibrium of a bisimide, pyromellitic diimide, in combination with poly(tetrahydrofuran) diamines. At room temperature, the resulting materials are elastic rubbers with a tensile modulus of 2-10 MPa, and they become predominantly viscous above a temperature of approximately 110 °C, which is dependent on the stoichiometry of the components. The diamide-imide equilibrium was studied in model reactions with NMR, and variable temperature infrared (IR) spectroscopy was used to investigate the temperature dependence of the equilibrium in the network. The temperature-dependent mechanical properties of the networks were found to be fully reversible, and the material could be reprocessed several times without loss of properties such as modulus or strain at break. The high processibility of these networks at elevated temperatures creates opportunities in additive manufacturing applications such as selective laser sintering.

| S-EPMC8552437 | biostudies-literature

Azobenzene Functionalized "T-Type" Poly(Amide Imide)s vs. Guest-Host Systems-A Comparative Study of Structure-Property Relations.

Project description:This paper describes the synthesis and characterization of new "T-type" azo poly(amide imide)s as well as guest-host systems based on the "T-type" matrices. The matrices possessed pyridine rings in a main-chain and azobenzene moieties located either between the amide or imide groups. The non-covalent polymers contained the molecularly dispersed 4-phenylazophenol or 4-[(4-methyl phenyl)diazinyl]phenol chromophores that are capable of forming intermolecular hydrogen bonds with the pyridine rings. The FTIR spectroscopy and the measurements of the thermal, optical and photoinduced optical birefringence were employed for the determination of the influence of H-bonds and the specific elements of polymer architecture on physicochemical properties. Moreover, the obtained results were compared to those described in our previous works to formulate structure-property relations that may be considered general for the class of "T-type" azo poly(amide imide)s.

| S-EPMC7215900 | biostudies-literature

Preparation of Novel Nitrogen-Rich Fluorinated Hyperbranched Poly(amide-imide) and Evaluation of Its Electrochromic Properties and Iodine Adsorption Behavior.

Project description:In this study, we successfully synthesized a novel triacid monomer by means of the thermal cyclization reaction. Subsequently, a series of nitrogen-rich (A3+B2)-type fluorinated hyperbranched poly(amide-imide)s (denoted as PAI-1 and -2, respectively) were prepared by means of a one-pot method using this triacid monomer and a diamine monomer with a triphenylamine-carbazole unit as precursors. The degree of support of the prepared hyperbranched PAIs was found to be about 60% via 1H NMR calculations. Through X-ray photoelectron spectroscopy (XPS), it was found that the binding energies of C-N (398.4 eV) and -NH (399.7 eV) became lower under a current, while the binding energy peak of N+ appeared at 402.9 eV. In addition, the PAIs have good solubility and thermal stability (Tgs: 256-261 °C, T10%: 564-608 °C). Cyclic voltammetry (CV) analysis shows that the hyperbranched PAI films have good redox properties, and a range of values for the HOMO (4.83 to 4.85 eV) versus LUMO (1.85 to 1.97 eV) energy levels are calculated. The PAI films have excellent electrochromic properties: PAI-1 on coloration efficiency (CE) and transmittance change (ΔT, 852 nm) are 257 cm2/C and 62%, respectively, and have long-lasting redox properties (100 cycles). In addition, we conduct iodine adsorption tests using the structural features of PAIs with electron-drawing units, and the results show that PAI-1 had a high adsorption capacity for iodine (633 mg/g).

| S-EPMC10707875 | biostudies-literature

New Membrane-Forming Aromatic Co-Poly(amide-imide)s: Influence of the Chemical Structure on the Morphological, Thermal and Transport Properties.

Project description:Polymer film membranes are used to solve specific separation problems that dictate structural requirements. Structural and morphological parameters of film membranes based on glassy polyheteroarylenes can be controlled in the process of preparation from solutions that opens up prospects for obtaining structured membranes required for targeted separation. In the case of aromatic poly(amide-imide)s, the possibility of controlling film formation and structure virtually has not been studied. In the present work, a series of homologous co-poly(amide-imide)s differing in the number of repeating units with carboxyl-substituted aromatic fragments was synthesized by polycondensation. Comparative analysis of the processes of formation of membranes with different morphologies based on these polymers under equal conditions was performed. New information was obtained about the influence of the amounts of carboxyl groups and the residual solvent on structural properties of asymmetric membranes. The influence of these factors on transport properties of dense membranes under pervaporation conditions was studied. It was demonstrated that in the case of carboxyl-containing poly(amide-imide)s, the domains formed during film preparation had a significant effect on membrane properties.

| S-EPMC8781751 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data