Dataset Information

Recyclable NiO/sepiolite as adsorbent to remove organic dye and its regeneration.

ABSTRACT: In this study, the impregnation synthesis of NiO/sepiolite and its application for dye removal during wastewater treatment is introduced. The NiO/sepiolite materials act as an adsorbent/catalyst. It comprises a unique combination of adsorption and high-temperature gas flow regeneration (the NiO/sepiolite acts as a catalyst at this stage, using regeneration rate as evaluation index of catalytic activity of NiO/sepiolite) in a single unit, in which the NiO/sepiolite was regenerated and reused for the next round adsorption of dye. An aqueous solution of methylene blue was used to evaluate the adsorption and regeneration performance of the adsorbent/catalyst. The regeneration rate reached 74% when the reaction time and temperature were 7 min and 350 °C, respectively. The effects of the regeneration temperature and volume fraction of O₂ on the regeneration rate were investigated. And the regeneration reaction kinetics was provided. The combination of adsorptive and catalytic properties in the NiO/sepiolite composites received interesting results for removing refractory biodegradable organic pollutants. This work provides new insights for the removal of dye from wastewater using Ni catalysts supported on natural low-cost clay.

SUBMITTER: Gao S

PROVIDER: S-EPMC8861065 | biostudies-literature | 2022 Feb

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Recyclable NiO/sepiolite as adsorbent to remove organic dye and its regeneration.

Gao Shu S Wang Dahua D Huang Zhi Z Su Chengyuan C Chen Menglin M Lin Xiangfeng X

Scientific reports 20220221 1

In this study, the impregnation synthesis of NiO/sepiolite and its application for dye removal during wastewater treatment is introduced. The NiO/sepiolite materials act as an adsorbent/catalyst. It comprises a unique combination of adsorption and high-temperature gas flow regeneration (the NiO/sepiolite acts as a catalyst at this stage, using regeneration rate as evaluation index of catalytic activity of NiO/sepiolite) in a single unit, in which the NiO/sepiolite was regenerated and reused for ...[more]

PMID: 35190589

Similar Datasets

Project description:This paper reported the first example on the use of chitosan films, without further modification, to remove and recover, through bio-sorption processes, the emerging pollutant Diclofenac from water. The latter was adopted as a model, among non-steroidal anti-inflammatory drugs, by obtaining a maximum adsorption capacity, qmax, on chitosan of about 10 mg/g, under the applied experimental conditions of work. The literature gap about the use of chitosan films, which was already used for dyes and heavy metals removal, to adsorb emerging pollutants from water was covered, claiming the wide range application of chitosan films to remove a different class of pollutants. Several parameters affecting the Diclofenac adsorption process, such as the pH and ionic strength of solutions containing Diclofenac, the amount of the bio-sorbent and pollutant, and the temperature values, were investigated. The kinetics and the adsorption isotherms, along with the thermodynamic parameters (ΔG°, ΔH°, and ΔS°) were also evaluated. The process occurred very efficiently, and Chitosan/Diclofenac amounts dependent, remove about the 90% of the pollutant, in 2 h, from the tested solutions, through electrostatic interaction involving the carboxylic moiety of Diclofenac and Chitosan amino groups. This finding was confirmed by the pH and salt effects on the bio-sorption process, including swelling measurements of Chitosan films and by FTIR-ATR analysis. In detail, the maximum adsorption was observed at pH 5, when pollutant and Chitosan were negatively and positively charged, respectively. By reducing or increasing the pH around this value, a reduced affinity was observed. Accordingly, the presence of salts retarded the Diclofenac removal screening its charges, which hinders the interaction with Chitosan. The sorption was spontaneous (ΔG° < 0) and endothermic (ΔH° > 0) following the pseudo-second order kinetic model. The process was Diclofenac and Chitosan amount dependent. In addition, the Freundlich and Temkin isotherms well described the process, which showed the heterogeneous character of the process. Experiments of the complete desorption were also performed by using NaCl solutions 0.25 M (like sea water salt concentration) proposing the reuse of the pollutant and the recycling of the bio-sorbent lowering the associated costs. The versatility of the adsorbent was reported by exploring the possibility to induce the Diclofenac light-induced degradation after the adsorption and by-products adsorption onto chitosan films. To emphasize the chitosan capacity of treating water, the removal of another pollutant such as Ketoprofen and the mixture of Diclofenac and Ketoprofen were investigated. In this way, a green and eco-friendly production-pollution prevention technology for removing emerging pollutants from water was presented, which reduced the overall environmental impact. This illustrated experiments both in static and dynamic conditions for potential industrial applications.

Dataset Information

Recyclable NiO/sepiolite as adsorbent to remove organic dye and its regeneration.

Publications

Recyclable NiO/sepiolite as adsorbent to remove organic dye and its regeneration.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets