Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

SnSe-Coated Microfiber Resonator for All-Optical Modulation.

ABSTRACT: In this study, a tin monoselenide (SnSe)-based all-optical modulator is firstly demonstrated with high tuning efficiency, broad bandwidth, and fast response time. The SnSe nanoplates are deposited in the microfiber knot resonator (MKR) on MgF2 substrate and change its transmission spectra by the external laser irradiation. The SnSe nanoplates and the microfiber are fabricated using the liquid-phase exfoliation method and the heat-flame taper-drawing method, respectively. Due to the strong absorption and enhanced light-matter interaction of the SnSe nanoplates, the largest transmitted power tunability is approximately 0.29 dB/mW with the response time of less than 2 ms. The broad tuning bandwidth is confirmed by four external pump lights ranging from ultraviolet to near-infrared. The proposed SnSe-coated microfiber resonator holds promising potential for wide application in the fields of all-optical tuning and fiber sensors.

SUBMITTER: Chen L

PROVIDER: S-EPMC8880113 | biostudies-literature | 2022 Feb

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

SnSe-Coated Microfiber Resonator for All-Optical Modulation.

Chen Lei L Ming Jingyuan J Zhang Zhishen Z Shang Jumei J Yu Lingyun L Guan Heyuan H Zhang Weina W Xu Zefeng Z Qiu Wentao W Chen Zhe Z Lu Huihui H

Nanomaterials (Basel, Switzerland) 20220219 4

In this study, a tin monoselenide (SnSe)-based all-optical modulator is firstly demonstrated with high tuning efficiency, broad bandwidth, and fast response time. The SnSe nanoplates are deposited in the microfiber knot resonator (MKR) on MgF<sub>2</sub> substrate and change its transmission spectra by the external laser irradiation. The SnSe nanoplates and the microfiber are fabricated using the liquid-phase exfoliation method and the heat-flame taper-drawing method, respectively. Due to the st ...[more]

PMID: 35215022

Similar Datasets

Optical circulation in a multimode optomechanical resonator.

Project description:Breaking the symmetry of electromagnetic wave propagation enables important technological functionality. In particular, circulators are nonreciprocal components that can route photons directionally in classical or quantum photonic circuits and offer prospects for fundamental research on electromagnetic transport. Developing highly efficient circulators thus presents an important challenge, especially to realise compact reconfigurable implementations that do not rely on magnetic fields to break reciprocity. We demonstrate optical circulation utilising radiation pressure interactions in an on-chip multimode optomechanical system. Mechanically mediated optical mode conversion in a silica microtoroid provides a synthetic gauge bias for light, enabling four-port circulation that exploits tailored interference between appropriate light paths. We identify two sideband conditions under which ideal circulation is approached. This allows to experimentally demonstrate ~10 dB isolation and <3 dB insertion loss in all relevant channels. We show the possibility of actively controlling the circulator properties, enabling ideal opportunities for reconfigurable integrated nanophotonic circuits.

| S-EPMC5935717 | biostudies-literature

Enhanced all-optical modulation in a graphene-coated fibre with low insertion loss.

Project description:Graphene is a highly versatile two-dimensional material platform that offers exceptional optical and electrical properties. Of these, its dynamic conductivity and low effective carrier mass are of particular interest for optoelectronic applications as they underpin the material's broadband nonlinear optical absorption and ultra-fast carrier mobility, respectively. In this paper, we utilize these phenomena to demonstrate a high-speed, in-fibre optical modulator developed on a side-polished optical fibre platform. An especially low insertion loss (<1 dB) was achieved by polishing the fibre to a near atomically smooth surface (<1 nm RMS), which minimized scattering and ensured excellent contact between the graphene film and the fibre. In order to enhance the light-matter interaction, the graphene film is coated with a high index polyvinyl butyral layer, which has the added advantage of acting as a barrier to the surrounding environment. Using this innovative approach, we have fabricated a robust and stable all-fibre device with an extinction ratio as high as 9 dB and operation bandwidth of 0.5 THz. These results represent a key step towards the integration of low-dimensional materials within standard telecoms networks.

| S-EPMC4802326 | biostudies-literature

Enhanced Biophotocurrent Generation in Living Photosynthetic Optical Resonator.

Project description:Bioenergy from photosynthetic living organisms is a potential solution for energy-harvesting and bioelectricity-generation issues. With the emerging interest in biophotovoltaics, extracting electricity from photosynthetic organisms remains challenging because of the low electron-transition rate and photon collection efficiency due to membrane shielding. In this study, the concept of "photosynthetic resonator" to amplify biological nanoelectricity through the confinement of living microalgae (Chlorella sp.) in an optical micro/nanocavity is demonstrated. Strong energy coupling between the Fabry-Perot cavity mode and photosynthetic resonance offers the potential of exploiting optical resonators to amplify photocurrent generation as well as energy harvesting. Biomimetic models and living photosynthesis are explored in which the power is increased by almost 600% and 200%, respectively. Systematic studies of photosystem fluorescence and photocurrent are simultaneously carried out. Finally, an optofluidic-based photosynthetic device is developed. It is envisaged that the key innovations proposed in this study can provide comprehensive insights in biological-energy sciences, suggesting a new avenue to amplify electrochemical signals using an optical cavity. Promising applications include photocatalysis, photoelectrochemistry, biofuel devices, and sustainable optoelectronics.

| S-EPMC7284217 | biostudies-literature

High thermoelectric efficiency realized in SnSe crystals via structural modulation.

Project description:Crystalline thermoelectrics have been developed to be potential candidates for power generation and electronic cooling, among which SnSe crystals are becoming the most representative. Herein, we realize high-performance SnSe crystals with promising efficiency through a structural modulation strategy. By alloying strontium at Sn sites, we modify the crystal structure and facilitate the multiband synglisis in p-type SnSe, favoring the optimization of interactive parameters μ and m*. Resultantly, we obtain a significantly enhanced PF ~85 μW cm-1 K-2, with an ultrahigh ZT ~1.4 at 300 K and ZTave ~2.0 among 300-673 K. Moreover, the excellent properties lead to single-leg device efficiency of ~8.9% under a temperature difference ΔT ~300 K, showing superiority among the current low- to mid-temperature thermoelectrics, with an enhanced cooling ΔTmax of ~50.4 K in the 7-pair thermoelectric device. Our study further advances p-type SnSe crystals for practical waste heat recovery and electronic cooling.

| S-EPMC10011372 | biostudies-literature

Optomechanical ring resonator for efficient microwave-optical frequency conversion.

Project description:Phonons traveling in solid-state devices are emerging as a universal excitation for coupling different physical systems. Phonons at microwave frequencies have a similar wavelength to optical photons in solids, enabling optomechanical microwave-optical transduction of classical and quantum signals. It becomes conceivable to build optomechanical integrated circuits (OMIC) that guide both photons and phonons and interconnect photonic and phononic devices. Here, we demonstrate an OMIC including an optomechanical ring resonator (OMR), where co-resonant infrared photons and GHz phonons induce significantly enhanced interconversion. The platform is hybrid, using wide bandgap semiconductor gallium phosphide (GaP) for waveguiding and piezoelectric zinc oxide (ZnO) for phonon generation. The OMR features photonic and phononic quality factors of >1 × 105 and 3.2 × 103, respectively. The optomechanical interconversion between photonic modes achieved an internal conversion efficiency [Formula: see text] and a total device efficiency [Formula: see text] at a low acoustic pump power of 1.6 mW. The efficient conversion in OMICs enables microwave-optical transduction for quantum information and microwave photonics applications.

| S-EPMC10663453 | biostudies-literature

Universal switching of plasmonic signals using optical resonator modes.

Project description:We propose and investigate, both experimentally and theoretically, a novel mechanism for switching and modulating plasmonic signals based on a Fano interference process, which arises from the coupling between a narrow-band optical Fabry-Pérot cavity and a surface plasmon polariton (SPP) source. The SPP wave emitted from the cavity is actively modulated in the vicinity of the cavity resonances by altering the cavity Q-factor and/or resonant frequencies. We experimentally demonstrate dynamic SPP modulation both by mechanical control of the cavity length and all-optically by harnessing the ultrafast nonlinearity of the Au mirrors that form the cavity. An electro-optical modulation scheme is also proposed and numerically illustrated. Dynamic operation of the switch via mechanical means yields a modulation in the SPP coupling efficiency of ~80%, while the all-optical control provides an ultrafast modulation with an efficiency of 30% at a rate of ~0.6 THz. The experimental observations are supported by both analytical and numerical calculations of the mechanical, all-optical and electro-optical modulation methods.

| S-EPMC6062243 | biostudies-literature

Ultra-fast Hygrometer based on U-shaped Optical Microfiber with Nanoporous Polyelectrolyte Coating.

Project description:Real-time measurement of the relative humidity of air has applications ranging from process control to safety. By using a microfiber form-factor, we demonstrate a miniature and fast-response hygrometer with the shortest-ever response time (3 ms). The sensor head consists of an optical microfiber of 10 µm diameter and 2 mm length configured to form a compact U-shaped probe, and functionalized with a polyelectrolyte multilayer coating of 1.0 bilayer. The sensing mechanism is primarily water-absorption-based optical loss. We have measured a response time of 3 ms and a recovery time of 36 ms. The sensitivity is as high as 0.4%/%RH, and the detection limit is as low as 1.6%RH. The maximum relative humidity is 99%RH, before reaching a recoverable dew-point.

| S-EPMC5554257 | biostudies-literature

Biofilm Detection by a Fiber-Tip Ball Resonator Optical Fiber Sensor.

Project description:Bacterial biofilms are one of the most important challenges that modern medicine faces due to the difficulties of diagnosis, antibiotic resistance, and protective mechanisms against aggressive environments. For these reasons, methods that ensure the inexpensive and rapid or real-time detection of biofilm formation on medical devices are needed. This study examines the possibilities of using optical- and fiber-based biosensors to detect and analyze early bacterial biofilms. In this study, the biofilm-forming model organism Pseudomonas aeruginosa was inoculated on the surface of the optical sensor and allowed to attach for 2 h. The biosensors were made by a fiber-tip ball resonator, fabricated through a CO2 laser splicer on a single-mode fiber, forming a weak reflective spectrum. An optical backscatter reflectometer was used to measure the refractive index detected by the sensors during different growth periods. The early biofilm concentration was determined by crystal violet (CV) binding assay; however, such a concentration was lower than the detection limit of this assay. This work presents a new approach of biofilm sensing in the early attachment stage with a low limit of detection up to 10-4 RIU (refractive index units) or 35 ± 20 × 103 CFU/mL (colony formed units).

| S-EPMC9313161 | biostudies-literature

Million-Q free space meta-optical resonator at near-visible wavelengths.

Project description:High-quality (Q)-factor optical resonators with extreme temporal coherence are of both technological and fundamental importance in optical metrology, continuous-wave lasing, and semiconductor quantum optics. Despite extensive efforts in designing high-Q resonators across different spectral regimes, the experimental realization of very large Q-factors at visible wavelengths remains challenging due to the small feature size that is sensitive to fabrication imperfections, and thus is typically implemented in integrated photonics. In the pursuit of free-space optics with the benefits of large space-bandwidth product and massive parallel operations, here we design and fabricate a near-visible-wavelength etch-free metasurface with minimized fabrication defects and experimentally demonstrate a million-scale ultrahigh-Q resonance. A new laser-scanning momentum-space-resolved spectroscopy technique with extremely high spectral and angular resolution is developed to characterize the record-high Q-factor as well as the dispersion of the million-Q resonance in free space. By integrating monolayer WSe2 into our ultrahigh-Q meta-resonator, we further demonstrate laser-like highly unidirectional and narrow-linewidth exciton emission, albeit without any operating power density threshold. Under continuous-wave laser pumping, we observe pump-power-dependent linewidth narrowing at room temperature, indicating the potential of our meta-optics platform in controlling coherent quantum light-sources. Our result also holds great promise for applications like optical sensing, spectral filtering, and few-photon nonlinear optics.

| S-EPMC11604761 | biostudies-literature

Micro-Electromechanical Acoustic Resonator Coated with Polyethyleneimine Nanofibers for the Detection of Formaldehyde Vapor.

Project description:We demonstrate a promising strategy to combine the micro-electromechanical film bulk acoustic resonator and the nanostructured sensitive fibers for the detection of low-concentration formaldehyde vapor. The polyethyleneimine nanofibers were directly deposited on the resonator surface by a simple electrospinning method. The film bulk acoustic resonator working at 4.4 GHz acted as a sensitive mass loading platform and the three-dimensional structure of nanofibers provided a large specific surface area for vapor adsorption and diffusion. The ultra-small mass change induced by the absorption of formaldehyde molecules onto the amine groups in polyethyleneimine was detected by measuring the frequency downshift of the film bulk acoustic resonator. The proposed sensor exhibits a fast, reversible and linear response towards formaldehyde vapor with an excellent selectivity. The gas sensitivity and the detection limit were 1.216 kHz/ppb and 37 ppb, respectively. The study offers a great potential for developing sensitive, fast-response and portable sensors for the detection of indoor air pollutions.

| S-EPMC6187669 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data