Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Preparation of ordered nanohole array structures by anodization of prepatterned Cu, Zn, and Ni.

ABSTRACT: Anodic porous oxides with ordered nanohole array structures were prepared by the formation of concave arrays on the surface of Cu, Zn, and Ni substrates and the subsequent anodization of the prepatterned substrates. The concave arrays on the surface of the substrate were formed by Ar ion milling using an alumina mask. Although the anodization of Cu, Zn, and Ni substrates without prepatterning generates spongelike porous structures, ordered arrays of cylindrical nanoholes were obtained by the anodization of prepatterned substrates. The interpore distance of the obtained nanohole arrays was controlled by changing the period of the concave arrays. Crystallized ordered nanohole arrays of Cu₂O, ZnO, and NiO were also obtained by heat treatment. The obtained anodic porous oxide with ordered nanohole array structures can be used for various applications such as photocatalysts, solar cells, and sensors.

SUBMITTER: Yanagishita T

PROVIDER: S-EPMC8981794 | biostudies-literature | 2022 Feb

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Preparation of ordered nanohole array structures by anodization of prepatterned Cu, Zn, and Ni.

Yanagishita Takashi T Masuda Takuya T Masuda Hideki H

RSC advances 20220201 11

Anodic porous oxides with ordered nanohole array structures were prepared by the formation of concave arrays on the surface of Cu, Zn, and Ni substrates and the subsequent anodization of the prepatterned substrates. The concave arrays on the surface of the substrate were formed by Ar ion milling using an alumina mask. Although the anodization of Cu, Zn, and Ni substrates without prepatterning generates spongelike porous structures, ordered arrays of cylindrical nanoholes were obtained by the ano ...[more]

PMID: 35424598

Similar Datasets

Profiling transcriptomic response of Enchytraeus albidus to Cu and Ni: Comparison with Cd and Zn

Project description:Metals, including copper (Cu) and nickel (Ni) are among the most common contaminants in soils in Europe. Although their effects are relatively well known regarding survival and reproduction of soil invertebrates, their modes of action in these organisms are still poorly studied. Enchytraeus albidus has been used in soil ecotoxicology for many years, and more recently has a gene library and an oligonucleotide microarray for this species which allowed gene expression studies. This has potentiated the means to study further in depth the mechanisms of response to stressors. The main aim of this study is to understand the mechanisms of response of E. albidus to Cu and Ni. For that we have 1) assessed and compared the transcriptomic profile of E. albidus in response to Cu and Ni and 2) compared the Cu, Ni, Cd and Zn transcriptomic profiles. For the microarray hybridizations, E. albidus were exposed to the reproduction effect concentrations EC50 and EC90 of Cu and Ni during 4 days. Results indicate that Cu and Ni have to some extent, similar mechanisms of toxicity and that have already been identified in other species, indicating cross-species conserved mechanisms. Based on hierarchical clustering, it was possible to observe a clear separation of Cd treatments from all other metals. This separation strongly correlates with the available information regarding the toxicokinetics of the tested metals, in which Ni shows properties similar to essential metals.

2013-12-31 | GSE47662 | GEO

Profiling transcriptomic response of Enchytraeus albidus to Cu and Ni: Comparison with Cd and Zn

2013-12-31 | E-GEOD-47662 | biostudies-arrayexpress

Preparation of reduced bovine Cu,Zn superoxide dismutase.

Project description:N.m.r. and e.p.r. were used to measure the oxidation state of copper in Cu,Zn superoxide dismutase treated with reducing agents such as NaBH4, K4Fe(CN)6, Na2S2O4 and H2O2. The activity and the electrophoretic pattern of the treated enzyme were also studied. On the basis of the reducing ability and of the absence of inactivating effects, NaBH4 was the most suitable reducer of those tested. Some characteristics of the reduction of superoxide dismutase by NaBH4 were further investigated. The results obtained indicate that NaBH4 can be used to prepare, in a few minutes, solutions of completely reduced enzyme without any apparent change of the activity and of the structure.

| S-EPMC1145153 | biostudies-other

Isolating Cu-Zn active-sites in Ordered Intermetallics to Enhance Nitrite-to-Ammonia Electroreduction.

Project description:Electrocatalytic nitrite reduction to the valuable ammonia is a green and sustainable alternative to the conventional Haber-Bosch method for ammonia synthesis, while the activity and selectivity for ammonia production remains poor at low nitrite concentrations. Herein, we report a nanoporous intermetallic single-atom alloy CuZn (np/ISAA-CuZn) catalyst with completely isolated Cu-Zn active-sites, which achieves neutral nitrite reduction reaction with a remarkable NH3 Faradaic efficiency over 95% and the highest energy efficiency of ≈ 59.1% in wide potential range from -0.2 to -0.8 V vs. RHE. The np/ISAA-CuZn electrocatalyst was able to operate stably at 500 mA cm-2 for 220 h under membrane electrode assembly conditions with a stabilized NH3 Faraday efficiency of ~80% and high NO2‒ removal rate of ~100%. A series of in situ experimental studies combined with density functional theory calculations reveal that strong electronic interactions of isolated Cu-Zn active-sites altered the protonation adsorption species, effectively alleviating the protonation barrier of *NO2 and thus greatly facilitating the selective reduction of NO2- into NH3.

| S-EPMC11585598 | biostudies-literature

Synthesis of an ordered nanoporous Cu/Ni/Au film for sensitive non-enzymatic glucose sensing.

Project description:Ordered nanoporous Cu/Ni/Au film was prepared by electrochemical deposition and magnetron sputtering using an anodic aluminium oxide template. The fabricated porous film has a uniform hexagonal pore size structure, a long-range ordered arrangement, and a pore diameter of approximately 40 nm. Following the dissolution of the template, the independent Cu/Ni/Au film is devolved to an ITO substrate as an effective non-enzyme glucose detection sensor. The sensor has good electrocatalytic performance with two specific linear ranges of 0.5 μM to 3.0 mM and 3.0-7.0 mM and high sensitivities of 4135 and 2972 μA mM-1 cm-2, respectively. The lower detection limit was 0.1 μM with a signal-to-noise ratio of 3. Additionally, the sensor features excellent selectivity and stability. These satisfactory results indicate that Cu/Ni/Au film is a promising platform for the development of non-enzymatic glucose sensors.

| S-EPMC9051312 | biostudies-literature

Ordered nanopore arrays with large interpore distances via one-step anodization.

Project description:Preparation of pre-patterned alumina substrates using bottom-up techniques compatible with nanotechnology applications is still a challenge. We present a novel methodology to achieve superior order in 'anodic' alumina with large interpore distances by a convenient one-step anodization process. The use of transparent insulators renders such anodic layers applicable as templates for nanostructured photovoltaic or photoelectrochemical devices.

| S-EPMC5944388 | biostudies-literature

Syntheses, crystal structures, magnetic properties and ESI-MS studies of a series of trinuclear CuIIMIICuII compounds (M = Cu, Ni, Co, Fe, Mn, Zn).

Project description:Six trinuclear CuIIMIICuII compounds (M = Cu, Ni, Co, Fe, Mn, Zn) derived from the Schiff base ligand, H2L (2 + 1 condensation product of salicylaldehyde and trans-1,2-diaminocyclohexane) are reported in this investigation. The composition of the metal complexes are [{CuIIL(ClO4)}2CuII(H2O)]·2H2O (1), [{CuIIL(ClO4)}{NiII(H2O)2}{CuIIL}]ClO4·CH3COCH3 (2), [{CuIIL(ClO4)}{CoII(CH3COCH3)(H2O)}{CuIIL(CH3COCH3)}]ClO4 (3) and isomorphic [{CuIIL(ClO4)}2MII(CH3OH)2] (4, M = Fe; 5, M = Mn; 6, M = Zn). Two copper(ii) ions in 1-6 occupy N2O2 compartments of two L2- ligands, while the second metal ion occupies the O(phenoxo)4 site provided by the two ligands, i.e., the two metal ions in both CuIIMII pairs are diphenoxo-bridged. Positive ESI-MS of 1-6 reveals some interesting features. Variable-temperature and variable-field magnetic studies reveal moderate or weak antiferromagnetic interactions in 1-6 with the following values of magnetic exchange integrals (H = -2JS 1 S 2 type): J 1 = -136.50 cm-1 and J = 0.00 for the CuIICuIICuII compound 1; J 1 = -22.16 cm-1 and J = -1.97 cm-1 for the CuIINiIICuII compound 2; J 1 = -14.78 cm-1 and J = -1.86 cm-1 for the CuIICoIICuII compound 3; J 1 = -6.35 cm-1 and J = -1.17 cm-1 for the CuIIFeIICuII compound 4; J 1 = -6.02 cm-1 and J = -1.70 cm-1 for the CuIIMnIICuII compound 5; J = -2.25 cm-1 for the CuIIZnIICuII compound 6 (J is between two CuII in the N2O2 compartments; J 1 is between CuII and MII through a diphenoxo bridge).

| S-EPMC9078389 | biostudies-literature

Vacuum nanohole array embedded phosphorescent organic light emitting diodes.

Project description:Light extraction from organic light-emitting diodes that utilize phosphorescent materials has an internal efficiency of 100% but is limited by an external quantum efficiency (EQE) of 30%. In this study, extremely high-efficiency organic light emitting diodes (OLEDs) with an EQE of greater than 50% and low roll-off were produced by inserting a vacuum nanohole array (VNHA) into phosphorescent OLEDs (PhOLEDs). The resultant extraction enhancement was quantified in terms of EQE by comparing experimentally measured results with those produced from optical modeling analysis, which assumes the near-perfect electric characteristics of the device. A comparison of the experimental data and optical modeling results indicated that the VNHA extracts the entire waveguide loss into the air. The EQE obtained in this study is the highest value obtained to date for bottom-emitting OLEDs.

| S-EPMC4346830 | biostudies-literature

Fabrication of Zn-Cu-Ni Ternary Oxides in Nanoarrays for Photo-Enhanced Pseudocapacitive Charge Storage.

Project description:To meet the increasing demands of energy consumption, sustainable energy sources such as solar energy should be better employed to promote electrochemical energy storage. Herein, we fabricated a bifunctional photoelectrode composed of copper foam (CF)-supported zinc-nickel-copper ternary oxides in nanoarrays (CF@ZnCuNiOx NAs) to promote photo-enhanced pseudocapacitive charge storage. The as-fabricated CF@ZnCuNiOx NAs have shown both photosensitive and pseudocapacitive characteristics, demonstrating a synergistic effect on efficient solar energy harvest and conversion. As a result, a high areal specific capacitance of 2741 mF cm-2 (namely 418 μAh cm-2) under light illumination can be calculated at 5 mA cm-2, which delivered photo-enhancement of 38.3% compared to that obtained without light. In addition, the photoelectric and photothermal effects of the light energy on pseudocapacitive charge storage have been preliminarily studied and compared. This work may provide some evidence on the different mechanisms of photoelectric/thermal conversion for developing solar-driven energy storage devices.

| S-EPMC9320418 | biostudies-literature

Response of ECF sigma factor deletion mutants of Cupriavidus metallidurans to mixed metal ions (Co, Cu, Cd, Zn, Ni, 30 µM each)

Project description:Response of Cupriavidus metallidurans CH34 and ECF deletion mutants to mixed metals

2018-11-20 | GSE115771 | GEO