Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Preparation of GO/SiO₂/PEA as a new solid base catalyst for the green synthesis of some spirooxindole derivatives.

ABSTRACT: Efficient and green one pot multi component synthesis of some spirooxindole derivatives in the presence of graphene oxide functionalized with 2-(1-piperazinyl) ethylamine (GO/SiO₂/PEA) as a solid base catalyst was studied. GO/SiO₂/PEA has been obtained through a two step reaction and characterized by Fourier transform infrared spectroscopy (FTIR), field emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray spectroscopy (EDX), thermo gravimetric analysis (TGA), Raman spectroscopy and X-ray diffraction (XRD). Green reaction conditions, short reaction times, reusable catalyst and a high to excellent yield of products are some of the advantageous of the presented method.

SUBMITTER: Toorbaf M

PROVIDER: S-EPMC9034106 | biostudies-literature | 2021 Jun

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Preparation of GO/SiO2/PEA as a new solid base catalyst for the green synthesis of some spirooxindole derivatives.

Toorbaf Mahla M Moradi Leila L

RSC advances 20210621 35

Efficient and green one pot multi component synthesis of some spirooxindole derivatives in the presence of graphene oxide functionalized with 2-(1-piperazinyl) ethylamine (GO/SiO2/PEA) as a solid base catalyst was studied. GO/SiO2/PEA has been obtained through a two step reaction and characterized by Fourier transform infrared spectroscopy (FTIR), field emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray spectroscopy (EDX), thermo gravimetric analysis (T ...[more]

PMID: 35478825

Similar Datasets

Green and facile sol-gel synthesis of the mesoporous SiO2-TiO2 catalyst by four different activation modes.

Project description:The most environmentally friendly protocol for obtaining mesoporous SiO2-TiO2 catalysts has been sought. Water has been employed as a green solvent, the energy input has been minimized, and three further principles (1, 3, and 12) of Green Chemistry have been considered. Four different modes for promoting the reaction have been comparatively evaluated, namely near-infrared and microwave electromagnetic irradiations, ultrasound, and traditional mantle heating. Brunauer-Emmett-Teller (BET) analyses of the catalysts produced revealed that the non-conventional activation modes afforded both large surface areas (335-441 m2 g-1) and smaller crystal sizes (7.2-15.3 nm) than the mantle heating process. These modes also generated the catalysts in shorter reaction times than traditional mantle heating, 10-30 min versus 3 h, with anatase as the sole crystalline phase. The photocatalytic degradation of 4-chlorophenol has been carried out to assess the catalytic efficiencies of the hybrid materials. The catalyst synthesized with microwave assistance showed the best mineralization activity (97%), followed by those prepared with ultrasound, near-infrared, and mantle heating. The materials have been extensively characterized by FTIR, XRD, DRS-UV/Vis, SEM, 29Si MAS NMR, and BET analyses. To the best of our knowledge, this is the first such comparative assessment of green energetic alternatives in developing a sol-gel process.

| S-EPMC9057439 | biostudies-literature

The preparation of benzyl esters using stoichiometric niobium (V) chloride versus niobium grafted SiO2 catalyst: A comparison study.

Project description:Two solvent free methods of a one-to-one alcohol/acid mol ratio synthesis of benzyl esters of the formic, acetic, benzoic, salicylic, nicotinic, and oxalic acids are described. The stoichiometric reactions used 1.5 mol ratio solid NbCl5 as the reagent and required from two to three hours for completion at room temperature; for the catalytic processes, NbCl5 was grafted directly, at room temperature, onto a silica gel of specific area of 507 m2g-1, produced from construction sand and sodium carbonate, forming a 5.4% Nb w/w SiO2-Nb gel with a specific area of 412 m2g-1. At 10% w/w catalyst/alcohol ratio, this SiO2-Nb catalyst gave similarly very good yields but required from 6 to 9 hours at the reflux temperature of the slurry. The catalyst could be re-used three times.

| S-EPMC5968132 | biostudies-literature

Effect of SiO2 amount on heterogeneous base catalysis of SiO2@Mg-Al layered double hydroxide.

Project description:The effects of SiO2 amount on the base catalysis of highly active finely crystallized Mg-Al type layered double hydroxides prepared by the co-precipitation method with coexistence of SiO2 spheres, denoted as SiO2@LDHs, were investigated. With the Si/(Mg + Al) atomic ratios of 0-0.50, the highest activity for the Knoevenagel condensation was observed in the case of Si/(Mg + Al) = 0.17, as the reaction rate of 171.1 mmol g(cat)-1 h-1. The base activity increased concomitantly with decreasing LDH crystallite size up to Si/(Mg + Al) atomic ratio of 0.17. However, above the Si/(Mg + Al) atomic ratio of 0.17, the reaction rate and TOFbase were decreased although the total base amount was increased. Results of TEM-EDS and 29Si CP-MAS NMR suggest that the co-existing SiO2 causes advantages for dispersion and reduction of the LDH crystallite to improve the base catalysis of SiO2@Mg-Al LDH, whereas the excess SiO2 species unfortunately poisons the highly active sites on the finely crystallized LDH crystals above a Si/(Mg + Al) atomic ratio of 0.17. According to these results, we inferred that the amount of spherical SiO2 seeds in the co-precipitation method is an important factor to increase the base catalysis of SiO2@LDHs; i.e. the control of Si/(Mg + Al) atomic ratio is necessary to avoid the poisoning of highly active base sites on the LDH crystal.

| S-EPMC9083954 | biostudies-literature

Loading of g-C3 N4 on Core-Shell Magnetic Mesoporous Silica Nanospheres as a Solid Base Catalyst for the Green Synthesis of some Chromene Derivatives under Different Conditions.

Project description:Using heterogeneous basic catalysts has a great importance in chemical reactions because of their advantages (such as easy separation and thermal stability at harsh conditions) over homogeneous catalysts. In this study, magnetic mesoporous silica nanoparticles (mSiO2 ) containing graphitic carbon nitride layers (mSiO2 /g-C3 N4 (x)) were fabricated through a facile process (x signifies the amount of melamine applied during synthesis). Graphitic carbon nitride layers were decorated on mSiO2 by calcination of immobilized melamine (as graphitic carbon nitride precursor) on mSiO2 in the last step of catalyst synthesis. The structure of the prepared catalysts was confirmed using XRD, BET, FESEM, EDX, elemental mapping and TEM methods. The catalytic efficiency of the so-obtained solid base composite was investigated for the synthesis of some dihydropyranochromenes and spiro-dihydropyranochromenes under thermal and microwave conditions. Using mSiO2 /g-C3 N4 (x) led to high yields under green conditions and in short reaction times and without a decrease in catalytic activity after four consecutive cycles.

| S-EPMC9278101 | biostudies-literature

Green synthesis of novel 5-amino-bispyrazole-4-carbonitriles using a recyclable Fe3O4@SiO2@vanillin@thioglycolic acid nano-catalyst.

Project description:Bis(thioglycolic acid)-vanillin (2,2'-(((4-hydroxy-3-methoxyphenyl)methylene)bis(sulfanediyl))diacetic acid)-functionalized silica-coated Fe3O4 magnetic nanoparticles (Fe3O4@SiO2@vanillin@thioglycolic acid MNPs) were synthesized and characterized by transmission electron microscopy (TEM), field emission scanning electron microscopy (FE-SEM), thermogravimetric analysis/differential thermogravimetry (TGA-DTG), X-ray powder diffraction (XRD), X-ray spectroscopy (EDX), vibrating sample magnetometry (VSM), zeta potential measurements and Fourier transform infrared spectroscopy (FT-IR). The ensuing MNPs offer an environmentally friendly procedure for the synthesis of novel 5-amino-pyrazole-4-carbonitriles via a three-component mechanochemical reaction of synthesized azo-linked aldehydes or synthesized pyrazolecarbaldehydes, malononitrile, and phenylhydrazine or p-tolylhydrazine adhering to the green chemistry principles; products were generated expeditiously in high yields. The catalyst could be quickly recovered and reused for six cycles with almost consistent activity. The structures of the synthesized 5-amino-pyrazole-4-carbonitrile compounds were confirmed by 1H NMR, 13C NMR, and FTIR spectra and elemental analyses. This new procedure has notable advantages such as operational simplicity, excellent yields, short reaction time, easy work-up, eco-friendliness and nontoxic catalyst. Also the catalyst can be easily recovered by an external magnetic field and reused for six consecutive reaction cycles without significant loss of activity.

| S-EPMC8978698 | biostudies-literature

Fe3O4@SiO2-PMA-Cu magnetic nanoparticles as a novel catalyst for green synthesis of β-thiol-1,4-disubstituted-1,2,3-triazoles.

Project description:The magnetic nanoparticles of Fe3O4 were synthesized through a solid-state reaction of hydrated iron (III) chloride, hydrated iron (II) chloride and NaOH, and then purified by calcination at high temperature. In order to protect ferrite nanoparticles from oxidation and agglomeration, and to manufacture a novel catalytic system of anchored copper on the magnetic substrate, the Fe3O4 was core-shelled by adding tetraethyl orthosilicate. Next, the prepared Fe3O4@SiO2 was supported by phosphomolybdic acid (PMA) as the second layer of nanocomposite at 80 °C in 30 h. Eventually, the new nanocomposite of Fe3O4@SiO2-PMA-Cu was successfully synthesized by adding copper (II) chloride solution and solid potassium borohydride. The structure of magnetic nanocatalyst was acknowledged through different techniques such as EDS, VSM, XRD, TEM, FT-IR, XPS, TGA, BET and FESEM. The synthesis of β-thiolo/benzyl-1,2,3-triazoles from various thiiranes, terminal alkynes and sodium azide was catalyzed by Fe3O4@SiO2-PMA-Cu nanocomposite in aqueous medium. In order to obtain the optimum condition, the effects of reaction time, temperature, catalyst amount and solvent were gauged. The recycled catalyst was used for several consecutive runs without any loss of activity.

| S-EPMC9279321 | biostudies-literature

Mechanistic study of 1,1-dimethylhydrazine transformation over Pt/SiO2 catalyst.

Project description:Catalytic oxidation of 1,1-dimethylhydrazine (UDMH) with molecular oxygen over Pt/SiO2 was studied by in situ FTIR spectroscopy coupled with online MS monitoring of the gas phase. An unusual two-step oxidation process was detected in experiments with the pulse UDMH feeding: initial UDMH oxidation over a fresh platinum surface quickly terminates due to the blockage of active sites; a time-separated second oxidation step corresponds to combustion of the surface residue. This residue consists of C[triple bond, length as m-dash]N nitrile groups formed via decomposition of the products of non-oxidative UDMH conversion, such as dimethylamine. The two-step oxidation picture is observed over a broad range of reaction temperatures and oxygen to UDMH ratios.

| S-EPMC9089307 | biostudies-literature

Ceria Promoted Cu-Ni/SiO2 Catalyst for Selective Hydrodeoxygenation of Vanillin.

Project description:A ceria (CeO2) promoted Cu-Ni bimetallic catalyst supported on SiO2 (Cu-Ni/CeO2-SiO2) was prepared and evaluated for catalytic hydrodeoxygenation (HDO) of vanillin. Silica supported monometallic Cu and Ni catalysts and bimetallic Cu-Ni catalyst (Cu/SiO2, Ni/SiO2, and Cu-Ni/SiO2), without a ceria promoter, were also synthesized and tested for the same application. The highest conversion of vanillin was achieved with the Cu-Ni/CeO2-SiO2 catalyst. Vanillyl alcohol was the sole product in the initial 2 h, followed by the formation of 2-methoxy-4-methylphenol, which was observed. Characterization of the synthesized catalysts revealed the presence of overlapping crystalline phases of CuO, NiO, and CeO2 on the Cu-Ni/CeO2-SiO2 surface. We extended our study to find out the results of using CeO2 as the support of the Cu-Ni bimetallic catalyst (Cu-Ni/CeO2). Partial incorporation of Cu and Ni cations into the ceria lattice took place, leading to the decrease of specific surface area and a concomitant compromise in the conversion. In the case of the Cu-Ni/CeO2-SiO2 catalyst, the higher conversion was accredited to the facile formation of Cu+ active centers by the synergistic interaction between Ce+4/Ce+3 and Cu+2/Cu+ redox couples and the incorporation of oxygen vacancies on the catalyst surface.

| S-EPMC6648372 | biostudies-literature

Glass surface as strong base, 'green' heterogeneous catalyst and degradation reagent.

Project description:Systematic screening of accelerated chemical reactions at solid/solution interfaces has been carried out in high-throughput fashion using desorption electrospray ionization mass spectrometry and it provides evidence that glass surfaces accelerate various base-catalyzed chemical reactions. The reaction types include elimination, solvolysis, condensation and oxidation, whether or not the substrates are pre-charged. In a detailed mechanistic study, we provide evidence using nanoESI showing that glass surfaces can act as strong bases and convert protic solvents into their conjugate bases which then act as bases/nucleophiles when participating in chemical reactions. In aprotic solvents such as acetonitrile, glass surfaces act as 'green' heterogeneous catalysts that can be recovered and reused after simple rinsing. Besides their use in organic reaction catalysis, glass surfaces are also found to act as degradation reagents for phospholipids with increasing extents of degradation occurring at low concentrations. This finding suggests that the storage of base/nucleophile-labile compounds or lipids in glass containers should be avoided.

| S-EPMC8294000 | biostudies-literature

Preparation of the WO X /MCM-41 Solid Acid Catalyst and the Catalytic Performance for Solketal Synthesis.

Project description:In the present work, an efficient and stable WO X /MCM-41 solid acid catalyst was prepared by the wet impregnation method. The characterization of powder X-ray diffraction, transmission electron microscopy, ultraviolet-visible, H2 temperature-programmed reduction, X-ray photoelectron spectroscopy, NH3 temperature-programmed desorption, and N2 adsorption-desorption isotherms confirmed that the impregnation amount and calcination temperature of WO X speciation affected the dispersity and acidity of the resulting catalyst. This WO X /MCM-41 solid acid catalyst was subsequently applied in the ketalization reaction of glycerol and acetone to produce solketal. By catalyst screening and reaction condition optimization, WO X /MCM-41 obtained by impregnating 20 wt % and calcining at 350 °C exhibited the highest solketal yield and catalytic stability.

| S-EPMC7876846 | biostudies-literature